870 Application of simulated patient-specific 3D printed kidney model fabricated by color multimaterial 3D printer from volumetric CT to aid renal carcinoma surgery

Abstract BackgroundThree-dimensional (3D) printing is a promising technology but the limitations are often poorly understood. We compare different 3D printingmethods with conventional machining techniques in manufacturing meatal urethral dilators which were recently removed from the Australian market. MethodsA prototype dilator was 3D printed vertically orientated on a low cost fused deposition modelling (FDM) 3D printer in polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS). It was also 3D printed horizontally orientated in ABS on a high-end FDM 3D printer with soluble support material, as well as on a SLS 3D printer in medical nylon. The dilator was also machined in stainless steel using a lathe. All dilators were tested mechanically in a custom rig by hanging calibrated weights from the handle until the dilator snapped. ResultsThe horizontally printed ABS dilator experienced failure at a greater load than the vertically printed PLA and ABS dilators respectively (503g vs 283g vs 163g, p < 0.001). The SLS nylon dilator and machined steel dilator did not fail. The steel dilator is most expensive with a quantity of five at 98 USD each, but this decreases to 30 USD each for a quantity of 1000. In contrast, the cost for the SLS dilator is 33 USD each for five and 27 USD each for 1000. ConclusionsAt the current time 3D printing is not a replacement for conventional manufacturing. 3D printing is best used for patient-specific parts, prototyping or manufacturing complex parts that have additional functionality that cannot otherwise beachieved.

Download Full-text

Three-dimensional printing versus conventional machining in the creation of a meatal urethral dilator: a cost and mechanical strength analysis

10.21203/rs.2.21033/v1 ◽

2020 ◽

Author(s):

Michael Yue-Cheng Chen ◽

Jacob Skewes ◽

Ryan Daley ◽

Maria Ann Woodruff ◽

Nicholas John Rukin

Keyword(s):

3D Printing ◽

Low Cost ◽

Three Dimensional ◽

Patient Specific ◽

Strength Analysis ◽

3D Printer ◽

Fused Deposition ◽

3D Printed ◽

The Cost ◽

Conventional Machining

Abstract Background Three-dimensional (3D) printing is a promising technology in medicine. Low-cost 3D printing options are accessible but the limitations are often poorly understood. We aim to compare fused deposition modelling (FDM), the most common and low cost 3D printing technique, with selective laser sintering (SLS) and conventional machining techniques in manufacturing meatal urethral dilators which were recently removed from the Australian market.Methods A meatal urethral dilator was designed using computer-aided design (CAD). The dilator was 3D printed vertically orientated on a low cost FDM 3D printer in polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS). It was also 3D printed horizontally orientated in ABS on a high-end FDM 3D printer with soluble support material, as well as on a SLS 3D printer in medical nylon. The dilator was also machined in medical stainless steel using a lathe. All dilators were tested mechanically in a custom rig by hanging calibrated weights from the handle until the dilator snapped.Results The horizontally printed ABS dilator experienced failure at a greater load than the vertically printed PLA and ABS dilators respectively (503g vs 283g vs 163g, p < 0.001). The SLS nylon dilator did not fail but began to bend and deformed at around 5,000g of pressure. The steel dilator did not bend even at 10,000g of pressure. The cost per dilator is highest for the steel dilator if assuming a low quantity of five at 98 USD, but this decreases to 30 USD for a quantity of 1000. In contrast, the cost for the SLS dilator is 33 USD for a quantity of five but relatively unchanged at 27 for a quantity of 1000.Conclusions SLS and conventional machining created clinically functional meatal dilators but low-cost FDM printing could not. We suggest that at the current time 3D printing is not a replacement for conventional manufacturing techniques which are still the most reliable way to produce large quantities of parts with a simple geometry such as the meatal dilator. 3D printing is best used for patient-specific parts, prototyping or manufacturing complex parts that have additional functionality that cannot be achieved with conventional machining methods.

Download Full-text

Quality Control in 3D Printing: Accuracy Analysis of 3D-Printed Models of Patient-Specific Anatomy

Materials ◽

10.3390/ma14041021 ◽

2021 ◽

Vol 14 (4) ◽

pp. 1021

Author(s):

Bernhard Dorweiler ◽

Pia Elisabeth Baqué ◽

Rayan Chaban ◽

Ahmed Ghazy ◽

Oroa Salem

Keyword(s):

Wall Thickness ◽

Large Scale ◽

Fused Deposition Modeling ◽

Vascular Anatomy ◽

3D Models ◽

Patient Specific ◽

Stl File ◽

Fused Deposition ◽

3D Printed ◽

The Mean

As comparative data on the precision of 3D-printed anatomical models are sparse, the aim of this study was to evaluate the accuracy of 3D-printed models of vascular anatomy generated by two commonly used printing technologies. Thirty-five 3D models of large (aortic, wall thickness of 2 mm, n = 30) and small (coronary, wall thickness of 1.25 mm, n = 5) vessels printed with fused deposition modeling (FDM) (rigid, n = 20) and PolyJet (flexible, n = 15) technology were subjected to high-resolution CT scans. From the resulting DICOM (Digital Imaging and Communications in Medicine) dataset, an STL file was generated and wall thickness as well as surface congruency were compared with the original STL file using dedicated 3D engineering software. The mean wall thickness for the large-scale aortic models was 2.11 µm (+5%), and 1.26 µm (+0.8%) for the coronary models, resulting in an overall mean wall thickness of +5% for all 35 3D models when compared to the original STL file. The mean surface deviation was found to be +120 µm for all models, with +100 µm for the aortic and +180 µm for the coronary 3D models, respectively. Both printing technologies were found to conform with the currently set standards of accuracy (<1 mm), demonstrating that accurate 3D models of large and small vessel anatomy can be generated by both FDM and PolyJet printing technology using rigid and flexible polymers.

Download Full-text

Total Meniscus Reconstruction Using a Polymeric Hybrid-Scaffold: Combined with 3D-Printed Biomimetic Framework and Micro-Particle

Polymers ◽

10.3390/polym13121910 ◽

2021 ◽

Vol 13 (12) ◽

pp. 1910

Author(s):

Hun-Jin Jeong ◽

Se-Won Lee ◽

Myoung Wha Hong ◽

Young Yul Kim ◽

Kyoung Duck Seo ◽

...

Keyword(s):

Shape Matching ◽

Femoral Condyle ◽

Immunohistochemical Analysis ◽

Cartilage Degeneration ◽

Patient Specific ◽

Hybrid Scaffold ◽

Meniscus Tissue ◽

Cell Source ◽

3D Printed ◽

Meniscus Regeneration

The meniscus has poor intrinsic regenerative capability, and its injury inevitably leads to articular cartilage degeneration. Although there are commercialized off-the-shelf alternatives to achieve total meniscus regeneration, each has its own shortcomings such as individualized size matching issues and inappropriate mechanical properties. We manufactured a polycaprolactone-based patient-specific designed framework via a Computed Tomography scan images and 3D-printing technique. Then, we completed the hybrid-scaffold by combining the 3D-printed framework and mixture micro-size composite which consists of polycaprolactone and sodium chloride to create a cell-friendly microenvironment. Based on this hybrid-scaffold with an autograft cell source (fibrochondrocyte), we assessed mechanical and histological results using the rabbit total meniscectomy model. At postoperative 12-week, hybrid-scaffold achieved neo-meniscus tissue formation, and its shape was maintained without rupture or break away from the knee joint. Histological and immunohistochemical analysis results showed obvious ingrowth of the fibroblast-like cells and chondrocyte cells as well as mature lacunae that were embedded in the extracellular matrix. Hybrid-scaffolding resulted in superior shape matching as compared to original meniscus tissue. Histological analysis showed evidence of extensive neo-meniscus cell ingrowth. Additionally, the hybrid-scaffold did not induce osteoarthritis on the femoral condyle surface. The 3D-printed hybrid-scaffold may provide a promising approach that can be applied to those who received total meniscal resection, using patient-specific design and autogenous cell source.

Download Full-text

Design, Fabrication, and Accuracy of a Novel Noncovering Lock-Mechanism Bilateral Patient-Specific Drill Guide Template for Nondeformed and Deformed Thoracic Spines

HSS Journal ® ◽

10.1177/1556331621996331 ◽

2021 ◽

pp. 155633162199633

Author(s):

Mehran Ashouri-Sanjani ◽

Shima Mohammadi-Moghadam ◽

Parisa Azimi ◽

Navid Arjmand

Keyword(s):

Thoracic Spine ◽

Sagittal Plane ◽

Ct Scanning ◽

Entry Point ◽

In Vivo Studies ◽

Patient Specific ◽

Plane Angle ◽

Severe Scoliosis ◽

3D Printed

Background: Pedicle screw (PS) placement has been widely used in fusion surgeries on the thoracic spine. Achieving cost-effective yet accurate placements through nonradiation techniques remains challenging. Questions/Purposes: Novel noncovering lock-mechanism bilateral vertebra-specific drill guides for PS placement were designed/fabricated, and their accuracy for both nondeformed and deformed thoracic spines was tested. Methods: One nondeformed and 1 severe scoliosis human thoracic spine underwent computed tomographic (CT) scanning, and 2 identical proportions of each were 3-dimensional (3D) printed. Pedicle-specific optimal (no perforation) drilling trajectories were determined on the CT images based on the entry point/orientation/diameter/length of each PS. Vertebra-specific templates were designed and 3D printed, assuring minimal yet firm contacts with the vertebrae through a noncovering lock mechanism. One model of each patient was drilled using the freehand and one using the template guides (96 pedicle drillings). Postoperative CT scans from the models with the inserted PSs were obtained and superimposed on the preoperative planned models to evaluate deviations of the PSs. Results: All templates fitted their corresponding vertebra during the simulated operations. As compared with the freehand approach, PS placement deviations from their preplanned positions were significantly reduced: for the nonscoliosis model, from 2.4 to 0.9 mm for the entry point, 5.0° to 3.3° for the transverse plane angle, 7.1° to 2.2° for the sagittal plane angle, and 8.5° to 4.1° for the 3D angle, improving the success rate from 71.7% to 93.5%. Conclusions: These guides are valuable, as the accurate PS trajectory could be customized preoperatively to match the patients’ unique anatomy. In vivo studies will be required to validate this approach.

Download Full-text

3D‐printed, patient‐specific intracranial aneurysm models: From clinical data to flow experiments with endovascular devices

Medical Physics ◽

10.1002/mp.14714 ◽

2021 ◽

Author(s):

Mariya S. Pravdivtseva ◽

Eva Peschke ◽

Thomas Lindner ◽

Fritz Wodarg ◽

Johannes Hensler ◽

...

Keyword(s):

Intracranial Aneurysm ◽

Clinical Data ◽

Patient Specific ◽

3D Printed ◽

Flow Experiments ◽

Endovascular Devices

Download Full-text

Custom, spray coated receive coils for magnetic resonance imaging

Scientific Reports ◽

10.1038/s41598-021-81833-0 ◽

2021 ◽

Vol 11 (1) ◽

Author(s):

A. M. Zamarayeva ◽

K. Gopalan ◽

J. R. Corea ◽

M. Z. Liu ◽

K. Pang ◽

...

Keyword(s):

Magnetic Resonance Imaging ◽

Magnetic Resonance ◽

Silver Nanoparticle ◽

Material Selection ◽

Spray Deposition ◽

Dielectric Materials ◽

Patient Specific ◽

High Signal ◽

Resonance Imaging ◽

3D Printed

AbstractWe have developed a process for fabricating patient specific Magnetic Resonance Imaging (MRI) Radio-frequency (RF) receive coil arrays using additive manufacturing. Our process involves spray deposition of silver nanoparticle inks and dielectric materials onto 3D printed substrates to form high-quality resonant circuits. In this paper, we describe the material selection and characterization, process optimization, and design and testing of a prototype 4-channel neck array for carotid imaging. We show that sprayed polystyrene can form a low loss dielectric layer in a parallel plate capacitor. We also demonstrate that by using sprayed silver nanoparticle ink as conductive traces, our devices are still dominated by sample noise, rather than material losses. These results are critical for maintaining high Signal-to-Noise-Ratio (SNR) in clinical settings. Finally, our prototype patient specific coil array exhibits higher SNR (5 × in the periphery, 1.4 × in the center) than a commercially available array designed to fit the majority of subjects when tested on our custom neck phantom. 3D printed substrates ensure an optimum fit to complex body parts, improve diagnostic image quality, and enable reproducible placement on subjects.

Download Full-text