scholarly journals Advective balance in pipe-formed vortex rings

2017 ◽  
Vol 836 ◽  
pp. 773-796
Author(s):  
Karim Shariff ◽  
Paul S. Krueger
Keyword(s):  
Reynolds Numbers ◽  
Vortex Rings ◽  
Quadratic Term ◽  
Axisymmetric Vortex ◽  
Order Of Magnitude ◽  
Cylindrical Diffusion ◽  
Type Boundary ◽  
The One ◽  
Type Boundary Condition ◽  
Edge Layer

Vorticity distributions in axisymmetric vortex rings produced by a piston–pipe apparatus are numerically studied over a range of Reynolds numbers, $Re$, and stroke-to-diameter ratios, $L/D$. It is found that a state of advective balance, such that $\unicode[STIX]{x1D701}\equiv \unicode[STIX]{x1D714}_{\unicode[STIX]{x1D719}}/r\approx F(\unicode[STIX]{x1D713},t)$, is achieved within the region (called the vortex ring bubble) enclosed by the dividing streamline. Here $\unicode[STIX]{x1D701}\equiv \unicode[STIX]{x1D714}_{\unicode[STIX]{x1D719}}/r$ is the ratio of azimuthal vorticity to cylindrical radius, and $\unicode[STIX]{x1D713}$ is the Stokes streamfunction in the frame of the ring. Some, but not all, of the $Re$ dependence in the time evolution of $F(\unicode[STIX]{x1D713},t)$ can be captured by introducing a scaled time $\unicode[STIX]{x1D70F}=\unicode[STIX]{x1D708}t$, where $\unicode[STIX]{x1D708}$ is the kinematic viscosity. When $\unicode[STIX]{x1D708}t/D^{2}\gtrsim 0.02$, the shape of $F(\unicode[STIX]{x1D713})$ is dominated by the linear-in-$\unicode[STIX]{x1D713}$ component, the coefficient of the quadratic term being an order of magnitude smaller. An important feature is that, as the dividing streamline ($\unicode[STIX]{x1D713}=0$) is approached, $F(\unicode[STIX]{x1D713})$ tends to a non-zero intercept which exhibits an extra $Re$ dependence. This and other features are explained by a simple toy model consisting of the one-dimensional cylindrical diffusion equation. The key ingredient in the model responsible for the extra $Re$ dependence is a Robin-type boundary condition, similar to Newton’s law of cooling, that accounts for the edge layer at the dividing streamline.

On some boundary value problems for the heat equation in a non-regular type of a prism of ℝN+1

2018 ◽  
Vol 25 (3) ◽  
pp. 427-439
Author(s):  
Arezki Kheloufi
Keyword(s):  
Dimensional Space ◽  
Boundary Value ◽  
Smooth Functions ◽  
Geometrical Properties ◽  
Regular Type ◽  
Noncylindrical Domain ◽  
Significant Case ◽  
Type Boundary ◽  
The One ◽  
Type Boundary Condition

AbstractThis paper is devoted to the analysis of the boundary value problem {\partial_{t}u-\Delta u=f}, with an N-dimensional space variable, subject to a Dirichlet–Robin type boundary condition on the lateral boundary of the domain. The problem is settled in a noncylindrical domain of the form Q=\{(t,x_{1})\in\mathbb{R}^{2}:0<t<T,\varphi_{1}(t)<x_{1}<\varphi_{2}(t)\}% \times\prod_{i=1}^{N-1}{]0,b_{i}[}, where {\varphi_{1}} and {\varphi_{2}} are smooth functions. One of the main issues of the paper is that the domain can possibly be non-regular; for instance, the significant case when {\varphi_{1}(0)=\varphi_{2}(0)} is allowed. We prove well-posedness results for the problem in a number of different settings and under natural assumptions on the coefficients and on the geometrical properties of the domain. This work is an extension of the one-dimensional case studied in [4].

Fractional advection–diffusion equation with memory and Robin-type boundary condition

2019 ◽  
Vol 14 (3) ◽  
pp. 306 ◽  
Author(s):  
Itrat Abbas Mirza ◽  
Dumitru Vieru ◽  
Najma Ahmed
Keyword(s):  
Diffusion Equation ◽  
Fourier Transforms ◽  
Solute Concentration ◽  
Minimum Concentration ◽  
Advection Diffusion Equation ◽  
Advection Diffusion ◽  
Type Boundary ◽  
The One ◽  
Type Boundary Condition ◽  
With Memory

The one-dimensional fractional advection–diffusion equation with Robin-type boundary conditions is studied by using the Laplace and finite sine-cosine Fourier transforms. The mathematical model with memory is developed by employing the generalized Fick’s law with time-fractional Caputo derivative. The influence of the fractional parameter (the non-local effects) on the solute concentration is studied. It is found that solute concentration can be minimized by decreasing the memory parameter. Also, it is found that, at small values of time the ordinary model leads to minimum concentration, while at large values of the time the fractional model is recommended.

Theoretical studies on the one- and two-photon absorption of tetrabenzoporphyrins and phthalocyanines

2004 ◽  
Vol 82 (1) ◽  
pp. 19-26 ◽  
Author(s):  
Xin Zhou ◽  
Ai-Min Ren ◽  
Ji-Kang Feng ◽  
Xiao-Juan Liu
Keyword(s):  
Dipole Moment ◽  
Cross Sections ◽  
Density Functional ◽  
Transition Dipole Moment ◽  
Photon Absorption ◽  
Transition Dipole ◽  
Two Photon Absorption ◽  
Two Photon ◽  
Order Of Magnitude ◽  
The One

The one-photon absorption (OPA) properties of tetrabenzoporphyrins (TBPs) and phthalocyanines (Pcs) were studied using the semiempirical ZINDO method and time-dependent density functional theory (TDDFT), respectively. The compared results confirmed that the semiempirical ZINDO method was reasonably reliable when calculating the OPA of tetrabenzoporphyrins and phthalocyanines. On the basis of the OPA properties obtained from the ZINDO method, two-photon absorption (TPA) properties of two series of molecules were investigated, using ZINDO and sum-over-states (SOS) methods. The results showed that the TPA cross-sections of all molecules were in the range of 220.6 × 10–50 – 345.9 × 10–50 cm4·s·photon–1, which were in the same order of magnitude as the values reported in the literature. The relatively larger δ(ω) value for Pcs with respect to that for corresponding TBPs originates from larger intramolecular charge transfer, which can be characterized by the difference of dipole moment between S0 and S1 and the transition dipole moment between S1 and S5.Key words: two-photon absorption, ZINDO, sum-over-states, tetrabenzoporphyrin, phthalocyanines.

scholarly journals On the linear stability of compressible plane Couette flow

1994 ◽  
Vol 258 ◽  
pp. 131-165 ◽  
Author(s):  
Peter W. Duck ◽  
Gordon Erlebacher ◽  
M. Yousuff Hussaini
Keyword(s):  
Linear Stability ◽  
Couette Flow ◽  
Small Amplitude ◽  
Reynolds Numbers ◽  
Inviscid Limit ◽  
Plane Couette Flow ◽  
Moving Wall ◽  
Type Boundary ◽  
The Stability ◽  
Radiation Type

The linear stability of compressible plane Couette flow is investigated. The appropriate basic velocity and temperature distributions are perturbed by a small-amplitude normal-mode disturbance. The full small-amplitude disturbance equations are solved numerically at finite Reynolds numbers, and the inviscid limit of these equations is then investigated in some detail. It is found that instabilities can occur, although the corresponding growth rates are often quite small; the stability characteristics of the flow are quite different from unbounded flows. The effects of viscosity are also calculated, asymptotically, and shown to have a stabilizing role in all the cases investigated. Exceptional regimes to the problem occur when the wave speed of the disturbances approaches the velocity of either of the walls, and these regimes are also analysed in some detail. Finally, the effect of imposing radiation-type boundary conditions on the upper (moving) wall (in place of impermeability) is investigated, and shown to yield results common to both bounded and unbounded flows.

Development of an Inverse Plume Model for Mass Eruption Rate in Unsteady Conditions

2021 ◽  
Author(s):  
Stephen A Solovitz
Keyword(s):  
Laboratory Data ◽  
Model Performance ◽  
Volcanic Eruptions ◽  
Reynolds Numbers ◽  
Model Parameters ◽  
Plume Height ◽  
Eruption Rate ◽  
Mass Eruption Rate ◽  
Downstream Effects ◽  
Order Of Magnitude

Abstract Following volcanic eruptions, forecasters need accurate estimates of mass eruption rate (MER) to appropriately predict the downstream effects. Most analyses use simple correlations or models based on large eruptions at steady conditions, even though many volcanoes feature significant unsteadiness. To address this, a superposition model is developed based on a technique used for spray injection applications, which predicts plume height as a function of the time-varying exit velocity. This model can be inverted, providing estimates of MER using field observations of a plume. The model parameters are optimized using laboratory data for plumes with physically-relevant exit profiles and Reynolds numbers, resulting in predictions that agree to within 10% of measured exit velocities. The model performance is examined using a historic eruption from Stromboli with well-documented unsteadiness, again providing MER estimates of the correct order of magnitude. This method can provide a rapid alternative for real-time forecasting of small, unsteady eruptions.

Flow induced by jets and plumes

1981 ◽  
Vol 108 ◽  
pp. 55-65 ◽  
Author(s):  
W. Schneider
Keyword(s):  
Stokes Equations ◽  
Outer Region ◽  
Reynolds Numbers ◽  
Slip Condition ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Laminar Jet ◽  
Order Of Magnitude ◽  
Valid Solution ◽  
Solid Walls

The order of magnitude of the flow velocity due to the entrainment into an axisymmetric, laminar or turbulent jet and an axisymmetric laminar plume, respectively, indicates that viscosity and non-slip of the fluid at solid walls are essential effects even for large Reynolds numbers of the jet or plume. An exact similarity solution of the Navier-Stokes equations is determined such that both the non-slip condition at circular-conical walls (including a plane wall) and the entrainment condition at the jet (or plume) axis are satisfied. A uniformly valid solution for large Reynolds numbers, describing the flow in the laminar jet region as well as in the outer region, is also given. Comparisons show that neither potential flow theory (Taylor 1958) nor viscous flow theories that disregard the non-slip condition (Squire 1952; Morgan 1956) provide correct results if the flow is bounded by solid walls.

Vortex rings impinging on walls: axisymmetric and three-dimensional simulations

1993 ◽  
Vol 256 ◽  
pp. 615-646 ◽  
Author(s):  
Paolo Orlandi ◽  
Roberto Verzicco
Keyword(s):  
Numerical Simulations ◽  
Strain Tensor ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Vortex Rings ◽  
Compression Phase ◽  
Vortex Pairing ◽  
The Impact ◽  
Good Agreement ◽  
Three Dimensional Simulations

Accurate numerical simulations of vortex rings impinging on flat boundaries revealed the same features observed in experiments. The results for the impact with a free-slip wall compared very well with previous numerical simulations that used spectral methods, and were also in qualitative agreement with experiments. The present simulation is mainly devoted to studying the more realistic case of rings interacting with a no-slip wall, experimentally studied by Walker et al. (1987). All the Reynolds numbers studied showed a very good agreement between experiments and simulations, and, at Rev > 1000 the ejection of a new ring from the wall was seen. Axisymmetric simulations demonstrated that vortex pairing is the physical mechanism producing the ejection of the new ring. Three-dimensional simulations were also performed to investigate the effects of azimuthal instabilities. These simulations have confirmed that high-wavenumber instabilities originate in the compression phase of the secondary ring within the primary one. The large instability of the secondary ring has been explained by analysis of the rate-of-strain tensor and vorticity alignment. The differences between passive scalars and the vorticity field have been also investigated.

Sign in / Sign up

Export Citation Format

Share Document