The fate of continuous input of relatively heavy fluid at the base of a porous medium

2021 ◽  
Vol 932 ◽  
Author(s):  
Herbert E. Huppert ◽  
Samuel S. Pegler

We evaluate theoretically and confirm experimentally the shape of the fluid envelope resulting from the input of relatively heavy fluid at a constant rate from a point source at the base of a homogeneous porous medium. In three dimensions an initially expanding hemisphere transitions into a gravity current flowing over the assumed rigid, horizontal and impermeable bottom of the porous medium. A range of increasing transition times occurs if defined by extrapolation of the relationships in the two extreme regimes (hemispherical shape and thin-layer gravity current) so that they intersect, for: the ratio of buoyancy to fluid resistance; the horizontal extent of the fluid; the ratio of height at the centre to the radius; and just the height at the centre. Corresponding results are derived for two-dimensional geometries. In this case, we conduct a series of laboratory experiments demonstrating the transition between the radial and gravity current regimes both in terms of form and propagation rate. The results are extrapolated briefly to two-layer systems, in order to begin to understand effects due to vertically heterogeneous pore structures. We sketch, and verify by experiment, that an expanding hemisphere in a lower layer can reach a much more permeable upper layer and flow through it as a gravity current, thereby uniting the two regimes.

The study of the transport and capture of particles moving in a fluid flow in a porous medium is an important problem of underground hydromechanics, which occurs when strengthening loose soil and creating watertight partitions for building tunnels and underground structures. A one-dimensional mathematical model of long-term deep filtration of a monodisperse suspension in a homogeneous porous medium with a dimensional particle retention mechanism is considered. It is assumed that the particles freely pass through large pores and get stuck at the inlet of small pores whose diameter is smaller than the particle size. The model takes into account the change in the permeability of the porous medium and the permissible flow through the pores with increasing concentration of retained particles. A new spatial variable obtained by a special coordinate transformation in model equations is small at any time at each point of the porous medium. A global asymptotic solution of the model equations is constructed by the method of series expansion in a small parameter. The asymptotics found is everywhere close to a numerical solution. Global asymptotic solution can be used to solve the inverse filtering problem and when planning laboratory experiments.


Fluids ◽  
2021 ◽  
Vol 6 (12) ◽  
pp. 434
Author(s):  
Assetbek Ashirbekov ◽  
Bagdagul Kabdenova ◽  
Ernesto Monaco ◽  
Luis R. Rojas-Solórzano

The original Shan-Chen’s pseudopotential Lattice Boltzmann Model (LBM) has continuously evolved during the past two decades. However, despite its capability to simulate multiphase flows, the model still faces challenges when applied to multicomponent-multiphase flows in complex geometries with a moderately high-density ratio. Furthermore, classical cubic equations of state usually incorporated into the model cannot accurately predict fluid thermodynamics in the near-critical region. This paper addresses these issues by incorporating a crossover Peng–Robinson equation of state into LBM and further improving the model to consider the density and the critical temperature differences between the CO2 and water during the injection of the CO2 in a water-saturated 2D homogeneous porous medium. The numerical model is first validated by analyzing the supercritical CO2 penetration into a single narrow channel initially filled with H2O, depicting the fundamental role of the driving pressure gradient to overcome the capillary resistance in near one and higher density ratios. Significant differences are observed by extending the model to the injection of CO2 into a 2D homogeneous porous medium when using a flat versus a curved inlet velocity profile.


Author(s):  
Eslam Ezzatneshan ◽  
Reza Goharimehr

In the present study, a pore-scale multicomponent lattice Boltzmann method (LBM) is employed for the investigation of the immiscible-phase fluid displacement in a homogeneous porous medium. The viscous fingering and the stable displacement regimes of the invading fluid in the medium are quantified which is beneficial for predicting flow patterns in pore-scale structures, where an experimental study is extremely difficult. Herein, the Shan-Chen (S-C) model is incorporated with an appropriate collision model for computing the interparticle interaction between the immiscible fluids and the interfacial dynamics. Firstly, the computational technique is validated by a comparison of the present results obtained for different benchmark flow problems with those reported in the literature. Then, the penetration of an invading fluid into the porous medium is studied at different flow conditions. The effect of the capillary number (Ca), dynamic viscosity ratio (M), and the surface wettability defined by the contact angle (θ) are investigated on the flow regimes and characteristics. The obtained results show that for M<1, the viscous fingering regime appears by driving the invading fluid through the pore structures due to the viscous force and capillary force. However, by increasing the dynamic viscosity ratio and the capillary number, the invading fluid penetrates even in smaller pores and the stable displacement regime occurs. By the increment of the capillary number, the pressure difference between the two sides of the porous medium increases, so that the pressure drop Δp along with the domain at θ=40∘ is more than that of computed for θ=80∘. The present study shows that the value of wetting fluid saturation Sw at θ=40∘ is larger than its value computed with θ=80∘ that is due to the more tendency of the hydrophilic medium to absorb the wetting fluid at θ=40∘. Also, it is found that the magnitude of Sw computed for both the contact angles is decreased by the increment of the viscosity ratio from Log(M)=−1 to 1. The present study demonstrates that the S-C LBM is an efficient and accurate computational method to quantitatively estimate the flow characteristics and interfacial dynamics through the porous medium.


2021 ◽  
Author(s):  
Khadija Tul Kubra Lehre ◽  
R. McKibbin ◽  
Sana Ullah Ullah Lehre ◽  
Muhammad Khalid ◽  
Winston L. Sweatman

2021 ◽  
Vol 16 (3) ◽  
pp. 69-74
Author(s):  
Efimova Irina A. ◽  

The problem of groundwater filtration under a point dam in a piecewise homogeneous porous medium in the presence of a weakly permeable film under the dam is considered. The filtration area is considered in the form of a vertical half-plane with a horizontal line of water courses. A weakly permeable film divides the filtration area into two quadrants with different constant permeability. By the convolution method of Fourier expansions, the solution of the problem is obtained explicitly. The influence of a weakly permeable film on the filtration process is investigated. It is shown that the presence of a weakly permeable film reduces the filtration rates in the downstream.


Sign in / Sign up

Export Citation Format

Share Document