Guided wave propagation in composite laminates using piezoelectric wafer active sensors

2013 ◽  
Vol 117 (1196) ◽  
pp. 971-995 ◽  
Author(s):  
M. Gresil ◽  
V. Giurgiutiu
Keyword(s):  
Wave Propagation ◽  
Composite Laminates ◽  
Composite Laminate ◽  
Mechanical Impedance ◽  
Guided Wave ◽  
Impedance Method ◽  
Active Sensors ◽  
Piezoelectric Wafer Active Sensors ◽  
Guided Wave Propagation ◽  
Piezoelectric Wafer

AbstractPiezoelectric wafer active sensors (PWAS) are lightweight and inexpensive transducers that enable a large class of structural health monitoring (SHM) applications such as: (a) embedded guided wave ultrasonics, i.e., pitch-catch, pulse-echo, phased arrays; (b) high-frequency modal sensing, i.e., electro-mechanical impedance method; and (c) passive detection. The focus of this paper is on the challenges posed by using PWAS transducers in the composite laminate structures as different from the metallic structures on which this methodology was initially developed. After a brief introduction, the paper reviews the PWAS-based SHM principles. It follows with a discussion of guided wave propagation in composites and PWAS tuning effects. Then, the mechanical effect is discussed on the integration of piezoelectric wafer inside the laminate using a compression after impact. Experiments were performed on a glass fibre laminate, employing PWAS to measure the attenuation coefficient. Finally, the paper presents some experimental and multi-physics finite element method (MP-FEM) results on guided wave propagation in composite laminate specimens.

scholarly journals Piezoelectric Wafer Active Sensors for Structural Health Monitoring of Composite Structures Using Tuned Guided Waves

2011 ◽  
Vol 133 (4) ◽  
Author(s):  
Victor Giurgiutiu
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Composite Structures ◽  
Guided Waves ◽  
Guided Wave ◽  
Impedance Method ◽  
Active Sensors ◽  
Structural Health ◽  
Piezoelectric Wafer Active Sensors ◽  
Piezoelectric Wafer

Piezoelectric wafer active sensors (PWAS) are lightweight and inexpensive transducers that enable a large class of structural health monitoring (SHM) applications such as: (a) embedded guided wave ultrasonics, i.e., pitch-catch, pulse-echo, phased arrays; (b) high-frequency modal sensing, i.e., the electro-mechanical (E/M) impedance method; and (c) passive detection (acoustic emission and impact detection). The focus of this paper is on the challenges posed by using PWAS transducers in the composite structures as different from the metallic structures on which this methodology was initially developed. After a brief introduction, the paper reviews the PWAS-based SHM principles. It follows with a discussion of guided wave propagation in composites and PWAS tuning effects. Then, it discusses damage modes in composites. Finally, the paper presents some experimental results with damage detection in composite specimens. Hole damage and impact damage were detected using pitch-catch method with tuned guided waves being sent between a transmitter PWAS and a received PWAS. Root mean square deviation (RMSD) damage index (DI) were shown to correlate well with hole size and impact intensity. The paper ends with summary and conclusion; suggestions for further work are also presented.

Piezoelectric Wafer Active Sensors for Structural Health Monitoring: State of the Art and Future Directions

2010 ◽  
Author(s):  
Victor Giurgiutiu
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Acoustic Waves ◽  
Guided Wave ◽  
Impedance Method ◽  
Active Sensors ◽  
Structural Health ◽  
Piezoelectric Wafer Active Sensors ◽  
Piezoelectric Wafer ◽  
Piezoelectric Transduction

Piezoelectric wafer active sensors (PWAS) are lightweight and inexpensive enablers for a large class of structural health monitoring (SHM) applications. The presentation will start with a brief review of PWAS physical principles and basic modeling. Then, the presentation will consider the several ways in which PWAS can be used for damage detection: (a) embedded guided-wave ultrasonics, i.e., pitch-catch, pulse-echo, phased arrays, thickness mode; (b) high-frequency modal sensing, i.e., the electro-mechanical (E/M) impedance method; (c) passive detection, i.e., acoustic emission and impact detection. Emphasis will be placed on recent developments. Special attention will be given to the mechatronics predictive modeling of the complete cycle from electrical excitation through piezoelectric transduction, ultrasonic acoustic waves, and finally reverse piezoelectric transduction to generate the received electric signal. Power and energy aspects of this process will be considered and discussed. The presentation will end with conclusions and suggestions for further work.

Predictive Simulation in Structural Health Monitoring With Piezoelectric Wafer Active Sensors for Risk-Informed In-Service Inspection

2011 ◽  
Author(s):  
Victor Giurgiutiu
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Acoustic Waves ◽  
Guided Wave ◽  
Impedance Method ◽  
Active Sensors ◽  
Structural Health ◽  
Piezoelectric Wafer Active Sensors ◽  
Piezoelectric Wafer ◽  
Piezoelectric Transduction

Piezoelectric wafer active sensors (PWAS) are lightweight and inexpensive enablers for a large class of structural health monitoring (SHM) applications. The presentation will start with a brief review of PWAS physical principles and basic modeling. Then, the presentation will consider the several ways in which PWAS can be used for damage detection: (a) embedded guided-wave ultrasonics, i.e., pitch-catch, pulse-echo, phased arrays, thickness mode; (b) high-frequency modal sensing, i.e., the electro-mechanical (E/M) impedance method; (c) passive detection, i.e., acoustic emission and impact detection. Emphasis will be placed on recent developments. Special attention will be given to the mechatronics predictive modeling of the complete cycle from electrical excitation through piezoelectric transduction, ultrasonic acoustic waves, and finally reverse piezoelectric transduction to generate the received electric signal. Power and energy aspects of this process will be considered and discussed. The presentation will end with conclusions and suggestions for further work.

scholarly journals Structural Health Monitoring of Composite Structures With Piezoelectric Wafer Active Sensors

2010 ◽  
Author(s):  
Victor Giurgiutiu
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Composite Structures ◽  
Guided Wave ◽  
Impedance Method ◽  
Active Sensors ◽  
Structural Health ◽  
Piezoelectric Wafer Active Sensors ◽  
Challenges And Opportunities ◽  
Piezoelectric Wafer

Piezoelectric wafer active sensors (PWAS) are lightweight and inexpensive enablers for a large class of structural health monitoring (SHM) applications such as: (a) embedded guided-wave ultrasonics, i.e., pitch-catch, pulse-echo, phased arrays; (b) high-frequency modal sensing, i.e., the electro-mechanical (E/M) impedance method; (c) passive detection (acoustic emission and impact detection). The focus of this paper will be on the challenges and opportunities posed by the composite structures as different from the metallic structures on which this methodology was initially developed. After a brief introduction, the paper discusses damage modes in composites. Then, it reviews the PWAS-based SHM principles. It follows with a discussion of guided wave propagation in composites and PWAS tuning effects. Finally, the paper presents some experimental results with damage detection in composite specimens. The paper ends with conclusions and suggestions for further work.

scholarly journals Non-Destructive Evaluation (NDE) of Space Application Panels Using Piezoelectric Wafer Active Sensors

2005 ◽  
Author(s):  
Adrian Cuc ◽  
Zeb Tidwell ◽  
Victor Giurgiutiu ◽  
Shiv Joshi
Keyword(s):  
Damage Detection ◽  
Complex Geometry ◽  
Lamb Waves ◽  
Mechanical Impedance ◽  
Impedance Method ◽  
Active Sensors ◽  
Space Applications ◽  
Piezoelectric Wafer Active Sensors ◽  
Investigation Methods ◽  
Piezoelectric Wafer

Ultrasonic guided waves inspection using Lamb waves is suitable for damage detection in metallic structures. This paper will present experimental results obtained using guided Lamb waves to detect flaws in aluminum specimens with design features applicable to space applications. Two aluminum panels were fabricated from a variable-thickness aluminum top plate, with two bolted I-beams edge stiffeners and four bonded angle stiffeners. Artificial damages were introduced in the two panels: cracks, corrosions, and disbonds. The proposed investigation methods used embedded piezoelectric wafer active sensors (PWAS) to excite and receive Lamb waves. Three wave propagation methods were used: pitch-catch, pulse-echo, and the embedded ultrasonic structural radar (EUSR). In addition, we also used a standing-wave damage detection technique, the electro-mechanical impedance method. The paper will present in detail the salient results from using these methods for damage detection and structural health monitoring. Where appropriate, comparison between different methods in detecting the same damage will be performed. The results have demonstrated the ability of piezoelectric wafer active sensors working in conjunction with guided Lamb waves to detect various types of damages present in complex geometry structures typical of space applications.

Sign in / Sign up

Export Citation Format

Share Document