An Unsteady Flow Wind Tunnel

1974 ◽  
Vol 25 (2) ◽  
pp. 81-90 ◽  
Author(s):  
J H Horlock
Keyword(s):  
Wind Tunnel ◽  
Unsteady Flow ◽  
Free Stream ◽  
Flow Direction ◽  
Axial Flow ◽  
Mean Velocity ◽  
Low Speed ◽  
The Mean ◽  
Low Speed Wind Tunnel

SummaryA novel low-speed wind tunnel which produces unsteady “gust” flows is described. The walls are sinusoidal in shape and are moved in the flow direction with a velocity Wwless than the mean velocity Wmof the free stream. The tunnel is useful for testing isolated aerofoils and aerofoils in cascade in non-convective gusts (Ww< Wm) so that comparisons with predictions by thin aerofoil theory may be made. However, it does not simulate precisely the unsteady flow that occurs in axial flow turbomachines.

Currentmeter Errors under Pulsating flow Conditions

1967 ◽  
Vol 9 (1) ◽  
pp. 45-54 ◽  
Author(s):  
P. Jepson
Keyword(s):  
Unsteady Flow ◽  
Theoretical Approach ◽  
Axial Flow ◽  
Pulsating Flow ◽  
Flow Conditions ◽  
Mean Velocity ◽  
Registration Errors ◽  
Flow Fluctuations ◽  
The Mean ◽  
Flow Pulsations

The paper deals with the effect of unsteady flow on the velocity registration of current-meters. In the first section of the paper, experiments are described which show that axial flow pulsations cause currentmeters to over-estimate and that flow fluctuations transverse to the mean velocity generally cause under-registration by amounts depending on the flow and meter parameters. From these tests general comments are made concerning the choice of metering station and to a lesser extent meter design. The second section is theoretical and deals with the effects of axially pulsating flows. It has been possible, using simple aerodynamic principles, to show how the meter design can be improved to minimize registration errors. The agreement between this theoretical approach and the registration errors obtained from experiment is fair.

Design and Construction of a Low Speed Wind Tunnel

2016 ◽  
Author(s):  
Odenir de Almeida ◽  
FREDERICO CARNEVALLI DE MIRANDA ◽  
Olivio Neto ◽  
Fernanda Guimarães Saad
Keyword(s):  
Wind Tunnel ◽  
Low Speed ◽  
Low Speed Wind Tunnel ◽  
Design And Construction

The Estimation of Discharge in an Experimental Open Channel

2014 ◽  
Vol 905 ◽  
pp. 369-373
Author(s):  
Choo Tai Ho ◽  
Yoon Hyeon Cheol ◽  
Yun Gwan Seon ◽  
Noh Hyun Suk ◽  
Bae Chang Yeon
Keyword(s):  
Unsteady Flow ◽  
River Discharge ◽  
Open Channel ◽  
Flow Conditions ◽  
Mean Velocity ◽  
Velocity Equation ◽  
The Mean ◽  
Loop Form

The estimation of a river discharge by using a mean velocity equation is very convenient and rational. Nevertheless, a research on an equation calculating a mean velocity in a river was not entirely satisfactory after the development of Chezy and Mannings formulas which are uniform equations. In this paper, accordingly, the mean velocity in unsteady flow conditions which are shown loop form properties was estimated by using a new mean velocity formula derived from Chius 2-D velocity formula. The results showed that the proposed method was more accurate in estimating discharge, when compared with the conventional formulas.

Effect of Blade Tip Geometry on Tip Flow and Heat Transfer for a Blade in a Low Speed Cascade

2003 ◽  
Author(s):  
Vikrant Saxena ◽  
Hasan Nasir ◽  
Srinath V. Ekkad
Keyword(s):  
Heat Transfer ◽  
Wind Tunnel ◽  
Flow Direction ◽  
Leakage Flow ◽  
Tip Leakage Flow ◽  
Transfer Coefficients ◽  
Wake Effect ◽  
Low Speed ◽  
Heat Transfer Coefficients ◽  
Blade Tip

A comprehensive investigation of the effect of various tip sealing geometries is presented on the blade tip leakage flow and associated heat transfer of a scaled up HPT turbine blade in a low-speed wind tunnel facility. The linear cascade is made of four blades with the two corner blades acting as guides. The tip section of a HPT first stage rotor blade is used to fabricate the 2-D blade. The wind tunnel accommodates an 116° turn for the blade cascade. The mainstream Reynolds number based on the axial chord length at cascade exit is 4.83 × 105. The upstream wake effect is simulated with a spoked wheel wake generator placed upstream of the cascade. A turbulence grid placed even farther upstream generates the required free-stream turbulence of 4.8%. The center blade has a tip clearance gap of 1.5625% with respect to the blade span. Static pressure measurements are obtained on the blade surface and the shroud. The effect of crosswise trip strips to reduce leakage flow and associated heat transfer is investigated with strips placed along the leakage flow direction, against the leakage flow and along the chord. Cylindrical pin fins and pitch variation of strips over the tip surface are also investigated. Detailed heat transfer measurements are obtained using a steady state HSI-based liquid crystal technique. The effect of periodic unsteady wake effect is also investigated by varying the wake Strouhal number from 0. to 0.2, and to 0.4. Results show that the trip strips placed against the leakage flow produce the lowest heat transfer on the tips compared to all the other cases with a reduction between 10–15% compared to the plain tip. Results also show that the pitch of the strips has a small effect on the overall reduction. Cylindrical pins fins and strips along the leakage flow direction do not decrease the heat transfer coefficients and in some cases enhance the heat transfer coefficients by as much as 20%.

Sign in / Sign up

Export Citation Format

Share Document