The start-up vortex issuing from a semi-infinite flat plate

2002 ◽  
Vol 455 ◽  
pp. 175-193 ◽  
Author(s):  
PAOLO LUCHINI ◽  
RENATO TOGNACCINI
Keyword(s):  
Stokes Equations ◽  
Navier Stokes ◽  
Implicit Integration ◽  
Navier Stokes Equations ◽  
Start Up ◽  
The Subject ◽  
Self Similar ◽  
The Mean ◽  
The Difference ◽  
Dependent Flow

The subject of the present work is the start-up vortex issuing from a sharp trailing edge accelerated from rest in still air. A numerical simulation of the flow has been performed in the case of a semi-infinite at plate by solving the Navier–Stokes equations in the ψ_ω formulation. The numerical algorithm is based on a fast multigrid implicit integration of the difference equations in an unstructured mesh that is dynamically built to minimize the computational costs. A local refinement of the mesh near the edge of the plate increases the accuracy of the simulation. The results show that the asymptotic stage of the vortex evolution is self-similar in the mean, but the appearance of instabilities produces a time-dependent flow which is not instantaneously self-similar.

scholarly journals Model-based scaling of the streamwise energy density in high-Reynolds-number turbulent channels

2013 ◽  
Vol 734 ◽  
pp. 275-316 ◽  
Author(s):  
Rashad Moarref ◽  
Ati S. Sharma ◽  
Joel A. Tropp ◽  
Beverley J. McKeon
Keyword(s):  
Reynolds Number ◽  
Stokes Equations ◽  
Reynolds Numbers ◽  
Low Rank ◽  
Navier Stokes ◽  
Mean Velocity ◽  
Navier Stokes Equations ◽  
Self Similar ◽  
The Mean ◽  
High Reynolds

AbstractWe study the Reynolds-number scaling and the geometric self-similarity of a gain-based, low-rank approximation to turbulent channel flows, determined by the resolvent formulation of McKeon & Sharma (J. Fluid Mech., vol. 658, 2010, pp. 336–382), in order to obtain a description of the streamwise turbulence intensity from direct consideration of the Navier–Stokes equations. Under this formulation, the velocity field is decomposed into propagating waves (with single streamwise and spanwise wavelengths and wave speed) whose wall-normal shapes are determined from the principal singular function of the corresponding resolvent operator. Using the accepted scalings of the mean velocity in wall-bounded turbulent flows, we establish that the resolvent operator admits three classes of wave parameters that induce universal behaviour with Reynolds number in the low-rank model, and which are consistent with scalings proposed throughout the wall turbulence literature. In addition, it is shown that a necessary condition for geometrically self-similar resolvent modes is the presence of a logarithmic turbulent mean velocity. Under the practical assumption that the mean velocity consists of a logarithmic region, we identify the scalings that constitute hierarchies of self-similar modes that are parameterized by the critical wall-normal location where the speed of the mode equals the local turbulent mean velocity. For the rank-1 model subject to broadband forcing, the integrated streamwise energy density takes a universal form which is consistent with the dominant near-wall turbulent motions. When the shape of the forcing is optimized to enforce matching with results from direct numerical simulations at low turbulent Reynolds numbers, further similarity appears. Representation of these weight functions using similarity laws enables prediction of the Reynolds number and wall-normal variations of the streamwise energy intensity at high Reynolds numbers (${Re}_{\tau } \approx 1{0}^{3} {\unicode{x2013}} 1{0}^{10} $). Results from this low-rank model of the Navier–Stokes equations compare favourably with experimental results in the literature.

GLOBAL EXISTENCE TO THE NAVIER–STOKES EQUATIONS THROUGH A SELF-SIMILAR-LIKE UPPER SOLUTION

2012 ◽  
Vol 14 (05) ◽  
pp. 1250031
Author(s):  
GUY BERNARD
Keyword(s):  
Global Existence ◽  
Heat Equation ◽  
Initial Velocity ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Dimensional Euclidean Space ◽  
Time Interval ◽  
Navier Stokes Equations ◽  
Upper Solution ◽  
Self Similar

A global existence result is presented for the Navier–Stokes equations filling out all of three-dimensional Euclidean space ℝ3. The initial velocity is required to have a bell-like form. The method of proof is based on symmetry transformations of the Navier–Stokes equations and a specific upper solution to the heat equation in ℝ3× [0, 1]. This upper solution has a self-similar-like form and models the diffusion process of the heat equation. By a symmetry transformation, the problem is transformed into an equivalent one having a very small initial velocity. Using the upper solution, the equivalent problem is then solved in the time interval [0, 1]. This local solution is then extended to the time interval [0, ∞) by an iterative process. At each step, the problem is extended further in time in an interval of time whose length is greater than one, thus producing the global solution. Each extension is transformed, by an appropriate change of variables, into the first local problem in the time interval [0, 1]. These transformations exploit the diffusive and self-similar-like nature of the upper solution.

Natural convection flow far from a horizontal plate

1999 ◽  
Vol 387 ◽  
pp. 227-254 ◽  
Author(s):  
VALOD NOSHADI ◽  
WILHELM SCHNEIDER
Keyword(s):  
Boundary Layer ◽  
Prandtl Number ◽  
Stokes Equations ◽  
Axisymmetric Flow ◽  
The Self ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Boundary Layer Equations ◽  
Self Similar ◽  
Similar Solutions

Plane and axisymmetric (radial), horizontal laminar jet flows, produced by natural convection on a horizontal finite plate acting as a heat dipole, are considered at large distances from the plate. It is shown that physically acceptable self-similar solutions of the boundary-layer equations, which include buoyancy effects, exist in certain Prandtl-number regimes, i.e. 0.5<Pr[les ]1.470588 for plane, and Pr>1 for axisymmetric flow. In the plane flow case, the eigenvalues of the self-similar solutions are independent of the Prandtl number and can be determined from a momentum balance, whereas in the axisymmetric case the eigenvalues depend on the Prandtl number and are to be determined as part of the solution of the eigenvalue problem. For Prandtl numbers equal to, or smaller than, the lower limiting values of 0.5 and 1 for plane and axisymmetric flow, respectively, the far flow field is a non-buoyant jet, for which self-similar solutions of the boundary-layer equations are also provided. Furthermore it is shown that self-similar solutions of the full Navier–Stokes equations for axisymmetric flow, with the velocity varying as 1/r, exist for arbitrary values of the Prandtl number.Comparisons with finite-element solutions of the full Navier–Stokes equations show that the self-similar boundary-layer solutions are asymptotically approached as the plate Grashof number tends to infinity, whereas the self-similar solution to the full Navier–Stokes equations is applicable, for a given value of the Prandtl number, only to one particular, finite value of the Grashof number.In the Appendices second-order boundary-layer solutions are given, and uniformly valid composite expansions are constructed; asymptotic expansions for large values of the lateral coordinate are performed to study the decay of the self-similar boundary-layer flows; and the stability of the jets is investigated using transient numerical solutions of the Navier–Stokes equations.

scholarly journals Numerical Investigation on the Water Entry of Several Different Bow-Flared Sections

2020 ◽  
Vol 10 (22) ◽  
pp. 7952
Author(s):  
Qiang Wang ◽  
Boran Zhang ◽  
Pengyao Yu ◽  
Guangzhao Li ◽  
Zhijiang Yuan
Keyword(s):  
Stokes Equations ◽  
Water Entry ◽  
Navier Stokes ◽  
Hydrodynamic Characteristics ◽  
Time Step ◽  
Navier Stokes Equations ◽  
Surface Evolution ◽  
Mesh Method ◽  
The Difference ◽  
Dynamics Method

The bow-flared section may be simplified in the prediction of slamming loads and whipping responses of ships. However, the difference of hydrodynamic characteristics between the water entry of the simplified sections and that of the original section has not been well documented. In this study, the water entry of several different bow-flared sections was numerically investigated using the computational fluid dynamics method based on Reynolds-averaged Navier–Stokes equations. The motion of the grid around the section was realized using the overset mesh method. Reasonable grid size and time step were determined through convergence studies. The application of the numerical method in the water entry of bow-flared sections was validated by comparing the present predictions with previous numerical and experimental results. Through a comparative study on the water entry of one original section and three simplified sections, the influences of simplification of the bow-flared section on hydrodynamic characteristics, free surface evolution, pressure field, and impact force were investigated and are discussed here.

Numerical Simulation of the Cooling Process of Cubic Shells

2011 ◽  
Author(s):  
Manabu Okura ◽  
Kiyoaki Ono
Keyword(s):  
Heat Transfer ◽  
Stokes Equations ◽  
Temperature Fields ◽  
Numerical Code ◽  
Navier Stokes ◽  
Cooling Process ◽  
Air Velocity ◽  
Navier Stokes Equations ◽  
The Difference ◽  
The Heat Transfer Coefficient

In order to keep the environment in an air-conditioned room comfortable, it is important to anticipate the air velocity and temperature fields precisely. The numerical code, solving simultaneously the Navier-Stokes equations governing flow field inside and outside the room and the heat conduction equation applying to walls, are developed. The assumption that the heat transfer coefficient between the fluid and the surface of solids is not used. This code is applied to investigate the cooling process of a cubic shell. The computational results agree with the experimental results. We also investigated the same process of the cubic shells whose walls are internally or externally insulated. The difference of the amount of heat transfer will be discussed.

Sign in / Sign up

Export Citation Format

Share Document