scholarly journals Numerical Investigation on the Water Entry of Several Different Bow-Flared Sections

2020 ◽  
Vol 10 (22) ◽  
pp. 7952
Author(s):  
Qiang Wang ◽  
Boran Zhang ◽  
Pengyao Yu ◽  
Guangzhao Li ◽  
Zhijiang Yuan
Keyword(s):  
Stokes Equations ◽  
Water Entry ◽  
Navier Stokes ◽  
Hydrodynamic Characteristics ◽  
Time Step ◽  
Navier Stokes Equations ◽  
Surface Evolution ◽  
Mesh Method ◽  
The Difference ◽  
Dynamics Method

The bow-flared section may be simplified in the prediction of slamming loads and whipping responses of ships. However, the difference of hydrodynamic characteristics between the water entry of the simplified sections and that of the original section has not been well documented. In this study, the water entry of several different bow-flared sections was numerically investigated using the computational fluid dynamics method based on Reynolds-averaged Navier–Stokes equations. The motion of the grid around the section was realized using the overset mesh method. Reasonable grid size and time step were determined through convergence studies. The application of the numerical method in the water entry of bow-flared sections was validated by comparing the present predictions with previous numerical and experimental results. Through a comparative study on the water entry of one original section and three simplified sections, the influences of simplification of the bow-flared section on hydrodynamic characteristics, free surface evolution, pressure field, and impact force were investigated and are discussed here.

Numerical Solution of 3-D Water Entry Problems With a Constrained Interpolation Profile Method

2012 ◽  
Vol 134 (4) ◽  
Author(s):  
Qingyong Yang ◽  
Wei Qiu
Keyword(s):  
Numerical Solutions ◽  
Stokes Equations ◽  
Type Equation ◽  
Water Entry ◽  
Navier Stokes ◽  
Time Step ◽  
Constrained Interpolation ◽  
Navier Stokes Equations ◽  
Highly Nonlinear ◽  
Calm Water

This paper presents the numerical solutions of slamming problems for 3D bodies entering calm water with vertical and oblique velocities. The highly nonlinear water entry problems are governed by the Navier-Stokes equations and were solved by a constrained interpolation profile (CIP)-based finite difference method on a fixed Cartesian grid. In the computation, the 3D CIP method was employed for the advection calculations and a pressure-based algorithm was applied for the nonadvection calculations. The solid body and the free surface interfaces were captured by density functions. For the pressure computation, a Poisson-type equation was solved at each time step by using the conjugate gradient iterative method. Validation studies were carried out for a 3D wedge, a cusped body vertically entering calm water, and the oblique entry of a sphere into calm water. The predicted hydrodynamic forces on the wedge, the cusped body, and the sphere were compared with experimental data.

An Implicit Scheme for Cascade Flow and Heat Transfer Analysis

1999 ◽  
Vol 122 (2) ◽  
pp. 294-300 ◽  
Author(s):  
C. Xu ◽  
R. S. Amano
Keyword(s):  
Heat Transfer ◽  
Stokes Equations ◽  
Implicit Scheme ◽  
Heat Transfer Analysis ◽  
Navier Stokes ◽  
Computational Time ◽  
Time Step ◽  
Navier Stokes Equations ◽  
Intermediate Time ◽  
The Difference

A new efficient implicit scheme, based on the second-order time and spatial difference algorithm for solving steady flow by using time-marching Navier–Stokes equations, was developed for predicting turbine cascade flows and heat transfer. The difference scheme comprises an explicit part in the intermediate time-step and an implicit part in the local time-step. The viscous flux vectors are decomposed to simplify the flow calculation in the explicit step. The time difference terms are expressed in terms of the viscous dependent terms that appear in the diffusion terms in the form by adding eigenvalues of viscous flux matrices into the time derivation term. In the presently proposed scheme, the two-sweep procedure is used in the implicit step instead of employing a traditional matrix operation to save the computational time. This method has been used to calculate the flow around C3X and VKI cascades. The computed results were compared with experimental data as well as with other published computations. The comparisons for both surface pressure and heat transfer coefficient showed good agreement with the experiments. [S0889-504X(00)01702-5]

scholarly journals An Implicit Scheme for Cascade Flow and Heat Transfer Analysis

1999 ◽  
Author(s):  
C. Xu ◽  
R. S. Amano
Keyword(s):  
Heat Transfer ◽  
Stokes Equations ◽  
Implicit Scheme ◽  
Heat Transfer Analysis ◽  
Navier Stokes ◽  
Computational Time ◽  
Time Step ◽  
Navier Stokes Equations ◽  
Intermediate Time ◽  
The Difference

A new efficient implicit scheme, based on the second-order time and spatial difference algorithm for solving steady flow by using time-marching Navier-Stokes equations, was developed for predicating turbine cascade flows and heat transfer. The difference scheme comprises an explicit part in the intermediate time-step and an implicit part in the local time-step. The viscous flux-vectors are decomposed to simplify the flow calculation in the explicit step. The time difference terms are expressed in terms of the viscous dependent terms which appear in the diffusion terms in the form by adding eigenvalues of viscous flux matrices into the time derivation term. In the presently proposed scheme, the two-sweep procedure is used in the implicit step instead of employing a traditional matrix operation to save the computational time. This method has been used to calculate the flow around C3X and VKI cascades. The computed results were compared with experimental data as well as with other published computations. The comparisons for both surface pressure and heat transfer coefficient showed good agreement with the experiments.

A finite element method for the Navier-Stokes equations in moving domain with application to hemodynamics of the left ventricle

2017 ◽  
Vol 32 (4) ◽  
Author(s):  
Alexander Danilov ◽  
Alexander Lozovskiy ◽  
Maxim Olshanskii ◽  
Yuri Vassilevski
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Left Ventricle ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Time Step ◽  
Navier Stokes Equations ◽  
Computed Tomography Images ◽  
Time Dependent Domain ◽  
Element Method

AbstractThe paper introduces a finite element method for the Navier-Stokes equations of incompressible viscous fluid in a time-dependent domain. The method is based on a quasi-Lagrangian formulation of the problem and handling the geometry in a time-explicit way. We prove that numerical solution satisfies a discrete analogue of the fundamental energy estimate. This stability estimate does not require a CFL time-step restriction. The method is further applied to simulation of a flow in a model of the left ventricle of a human heart, where the ventricle wall dynamics is reconstructed from a sequence of contrast enhanced Computed Tomography images.

NUMERICAL SOLUTIONS OF 2D AND 3D SLAMMING PROBLEMS

2021 ◽  
Vol 153 (A2) ◽  
Author(s):  
Q Yang ◽  
W Qiu
Keyword(s):  
Free Surface ◽  
Numerical Solutions ◽  
Stokes Equations ◽  
Type Equation ◽  
The Body ◽  
Navier Stokes ◽  
Time Step ◽  
Navier Stokes Equations ◽  
Highly Nonlinear ◽  
2D And 3D

Slamming forces on 2D and 3D bodies have been computed based on a CIP method. The highly nonlinear water entry problem governed by the Navier-Stokes equations was solved by a CIP based finite difference method on a fixed Cartesian grid. In the computation, a compact upwind scheme was employed for the advection calculations and a pressure-based algorithm was applied to treat the multiple phases. The free surface and the body boundaries were captured using density functions. For the pressure calculation, a Poisson-type equation was solved at each time step by the conjugate gradient iterative method. Validation studies were carried out for 2D wedges with various deadrise angles ranging from 0 to 60 degrees at constant vertical velocity. In the cases of wedges with small deadrise angles, the compressibility of air between the bottom of the wedge and the free surface was modelled. Studies were also extended to 3D bodies, such as a sphere, a cylinder and a catamaran, entering calm water. Computed pressures, free surface elevations and hydrodynamic forces were compared with experimental data and the numerical solutions by other methods.

scholarly journals Spectral Direction Splitting Schemes for the Incompressible Navier-Stokes Equations

2011 ◽  
Vol 1 (3) ◽  
pp. 215-234 ◽  
Author(s):  
Lizhen Chen ◽  
Jie Shen ◽  
Chuanju Xu
Keyword(s):  
Stokes Equations ◽  
Navier Stokes ◽  
Splitting Schemes ◽  
Time Step ◽  
Order Of Accuracy ◽  
Navier Stokes Equations ◽  
Pressure Stabilization ◽  
Legendre Spectral Method ◽  
Direction Splitting ◽  
The Stability

AbstractWe propose and analyze spectral direction splitting schemes for the incompressible Navier-Stokes equations. The schemes combine a Legendre-spectral method for the spatial discretization and a pressure-stabilization/direction splitting scheme for the temporal discretization, leading to a sequence of one-dimensional elliptic equations at each time step while preserving the same order of accuracy as the usual pressure-stabilization schemes. We prove that these schemes are unconditionally stable, and present numerical results which demonstrate the stability, accuracy, and efficiency of the proposed methods.

Numerical integration of the three-dimensional Navier-Stokes equations for incompressible flow

1969 ◽  
Vol 37 (4) ◽  
pp. 727-750 ◽  
Author(s):  
Gareth P. Williams
Keyword(s):  
Poisson Equation ◽  
Incompressible Flows ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Wave Flow ◽  
Trigonometric Interpolation ◽  
Time Step ◽  
Navier Stokes Equations ◽  
The Poisson Equation

A method of numerically integrating the Navier-Stokes equations for certain three-dimensional incompressible flows is described. The technique is presented through application to the particular problem of describing thermal convection in a rotating annulus. The equations, in cylindrical polar co-ordinate form, are integrated with respect to time by a marching process, together with the solving of a Poisson equation for the pressure. A suitable form of the finite difference equations gives a computationally-stable long-term integration with reasonably faithful representation of the spatial and temporal characteristics of the flow.Trigonometric interpolation techniques provide accurate (discretely exact) solutions to the Poisson equation. By using an auxiliary algorithm for rapid evaluation of trigonometric transforms, the proportion of computation needed to solve the Poisson equation can be reduced to less than 25% of the total time needed to’ advance one time step. Computing on a UNIVAC 1108 machine, the flow can be advanced one time-step in 2 sec for a 14 × 14 × 14 grid upward to 96 sec for a 60 × 34 × 34 grid.As an example of the method, some features of a solution for steady wave flow in annulus convection are presented. The resemblance of this flow to the classical Eady wave is noted.

Numerical Simulation of the Cooling Process of Cubic Shells

2011 ◽  
Author(s):  
Manabu Okura ◽  
Kiyoaki Ono
Keyword(s):  
Heat Transfer ◽  
Stokes Equations ◽  
Temperature Fields ◽  
Numerical Code ◽  
Navier Stokes ◽  
Cooling Process ◽  
Air Velocity ◽  
Navier Stokes Equations ◽  
The Difference ◽  
The Heat Transfer Coefficient

In order to keep the environment in an air-conditioned room comfortable, it is important to anticipate the air velocity and temperature fields precisely. The numerical code, solving simultaneously the Navier-Stokes equations governing flow field inside and outside the room and the heat conduction equation applying to walls, are developed. The assumption that the heat transfer coefficient between the fluid and the surface of solids is not used. This code is applied to investigate the cooling process of a cubic shell. The computational results agree with the experimental results. We also investigated the same process of the cubic shells whose walls are internally or externally insulated. The difference of the amount of heat transfer will be discussed.

Numerical Calculation on Vortex-Induced Vibration of the Circular Cylinder Using Low Reynolds Model in Hybrid Method

2009 ◽  
Author(s):  
Xingwei Zhang ◽  
Chaoying Zhou
Keyword(s):  
Numerical Calculation ◽  
Finite Volume Method ◽  
Finite Volume ◽  
Turbulence Model ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Vortex Induced Vibration ◽  
Mesh Method ◽  
Volume Method

Fundamental research on interaction between flow and structure is presented for computation the fluid dynamics of different two-dimensional oscillating models. The Navier-Stokes equations are solved using finite volume method. A multigrid mesh method which was applied to the situation of flow past the stagnating or vibrating cylinder is developed to simulate this type of flow. The interactive results between flow and structure rigid cylinders have been present. The computation fluid dynamic codes mainly with low Reynolds RANS solver are used to solve the impressible viscous Navier-Stokes equations. Finite volume method which is coupled with conformal hybrid mesh method is developed to simulate this type of flow. Numerical investigation focused on the response and the fluid forces on the cylinders and also observed the different shedding model in the wake. The numerical results are compared in detail with recent experimental and computational work. Present numerical comparison also showed that solution using different turbulence model will make the result have a little discrepancy and each turbulence model has respective characteristics in numerical solution on the vortex-induced vibration of the cylinder. In addition, the formation of the 2P vortex shedding model through the lock-in region and the beginning of the shedding model transformation in numerical calculation from 2S model to 2P model has been analyzed.

Sign in / Sign up

Export Citation Format

Share Document