Measurements in the near-wall region of a boundary layer over a wall with large transverse curvature

2010 ◽  
Vol 664 ◽  
pp. 33-50 ◽  
Author(s):  
M. H. KRANE ◽  
L. M. GREGA ◽  
T. WEI
Keyword(s):  
Boundary Layer ◽  
Direct Determination ◽  
Streamwise Velocity ◽  
Wall Region ◽  
Wall Velocity ◽  
Transverse Curvature ◽  
Spatially Resolved ◽  
Streamwise Location ◽  
Image Velocimetry ◽  
Near Wall

Measurements of the near-wall velocity field of the flow over cylinders aligned with a uniform flow are presented. The broader objective of this investigation was to quantify and understand the role of transverse curvature in the limit as cylinder diameter approaches zero. The specific goal was to begin with a turbulent boundary layer over a larger radius cylinder and see what happens as the radius is reduced. Spatially and temporally resolved digital particle image velocimetry (DPIV) measurements were made on three different radius cylinders, 0.14 cm ≤ a ≤ 3.05 cm, extending along the length of a large free-surface water tunnel. Mean and fluctuating profiles are presented at a fixed streamwise location and free-stream speed. For the first time, spatially resolved measurements were made very close to the wall, permitting direct determination of wall shear stress, i.e. uτ, from near-wall velocity profiles. The measurements revealed a region close to the wall for small radii where the mean streamwise velocity profile is inflectional. This has significant implications on assumptions regarding what happens in the limit of a vanishing cylinder radius.

scholarly journals Active control of multiscale features in wall-bounded turbulence

2019 ◽  
Vol 36 (1) ◽  
pp. 12-21 ◽  
Author(s):  
Xiaotong Cui ◽  
Nan Jiang ◽  
Xiaobo Zheng ◽  
Zhanqi Tang
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Turbulent Energy ◽  
Streamwise Velocity ◽  
Discrete Wavelet ◽  
Wall Region ◽  
Mean Velocity ◽  
Pzt Actuator ◽  
The Impact ◽  
Near Wall

Abstract This study experimentally investigates the impact of a single piezoelectric (PZT) actuator on a turbulent boundary layer from a statistical viewpoint. The working conditions of the actuator include a range of frequencies and amplitudes. The streamwise velocity signals in the turbulent boundary layer flow are measured downstream of the actuator using a hot-wire anemometer. The mean velocity profiles and other basic parameters are reported. Spectra results obtained by discrete wavelet decomposition indicate that the PZT vibration primarily influences the near-wall region. The turbulent intensities at different scales suggest that the actuator redistributes the near-wall turbulent energy. The skewness and flatness distributions show that the actuator effectively alters the sweep events and reduces intermittency at smaller scales. Moreover, under the impact of the PZT actuator, the symmetry of vibration scales’ velocity signals is promoted and the structural composition appears in an orderly manner. Probability distribution function results indicate that perturbation causes the fluctuations in vibration scales and smaller scales with high intensity and low intermittency. Based on the flatness factor, the bursting process is also detected. The vibrations reduce the relative intensities of the burst events, indicating that the streamwise vortices in the buffer layer experience direct interference due to the PZT control.

POD Investigation of Near-Wall Turbulent Structures

2002 ◽  
Author(s):  
Gaetano Maria Di Cicca ◽  
Angelo Iollo ◽  
Pier Giorgio Spazzini ◽  
Gaetano Iuso ◽  
Michele Onorato
Keyword(s):  
Experimental Data ◽  
Boundary Layer ◽  
Particle Image ◽  
Digital Particle Image Velocimetry ◽  
Orthogonal Decomposition ◽  
Wall Region ◽  
Turbulent Structures ◽  
Image Velocimetry ◽  
Proper Orthogonal ◽  
Near Wall

Experimental data of a turbulent boundary layer developing over a flat plate, obtained by Digital Particle Image Velocimetry (DPIV) technique, are analyzed making use of proper orthogonal decomposition (POD). Different POD definitions have been used in order to check their ability in educing the various structures dominating the near wall region. Results show a specific sensitivity depending on the POD definition adopted.

Spectral Dynamics in a Channel Flow With Microbubbles

2004 ◽  
Author(s):  
Jose Alfredo Jimenez Bernal ◽  
Yassin A. Hassan ◽  
Carlos E. Estrada Perez ◽  
Claudia del Carmen Gutierrez-Torres
Keyword(s):  
Boundary Layer ◽  
Channel Flow ◽  
Energy Content ◽  
Water Channel ◽  
Outer Region ◽  
Streamwise Velocity ◽  
Wall Region ◽  
Piv Measurement ◽  
Image Velocimetry ◽  
The One

Measurements were carried out near the upper wall of a turbulent water channel flow at Reynolds number equal to 10256 (considering total height of the channel and the bulk velocity). Particle Image Velocimetry (PIV) measurement technique was used to record instantaneous velocity fields in the x-y plane. The evaluation of the one dimensional spectra for the fluctuating streamwise velocity was performed in the streamwise wavenumber direction (k1) with and without microbubbles in the boundary layer. A redistribution of the energy from larger wavenumber to lower wavenumber was observed for the spectra close to the wall. However, the opposite trend was obtained in the outer region. The energy content with microbubbles was less than the energy without microbubbles in the near wall region of the boundary layer.

The Effects of Adverse Pressure Gradients on Momentum and Thermal Structures in Transitional Boundary Layers: Part 2—Fluctuation Quantities

1996 ◽  
Vol 118 (4) ◽  
pp. 728-736 ◽  
Author(s):  
S. P. Mislevy ◽  
T. Wang
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Transition Region ◽  
Boundary Layers ◽  
Reynolds Shear Stress ◽  
Turbulent Shear ◽  
Wall Region ◽  
Pressure Gradients ◽  
Baseline Case ◽  
Near Wall

The effects of adverse pressure gradients on the thermal and momentum characteristics of a heated transitional boundary layer were investigated with free-stream turbulence ranging from 0.3 to 0.6 percent. Boundary layer measurements were conducted for two constant-K cases, K1 = −0.51 × 10−6 and K2 = −1.05 × 10−6. The fluctuation quantities, u′, ν′, t′, the Reynolds shear stress (uν), and the Reynolds heat fluxes (νt and ut) were measured. In general, u′/U∞, ν′/U∞, and νt have higher values across the boundary layer for the adverse pressure-gradient cases than they do for the baseline case (K = 0). The development of ν′ for the adverse pressure gradients was more actively involved than that of the baseline. In the early transition region, the Reynolds shear stress distribution for the K2 case showed a near-wall region of high-turbulent shear generated at Y+ = 7. At stations farther downstream, this near-wall shear reduced in magnitude, while a second region of high-turbulent shear developed at Y+ = 70. For the baseline case, however, the maximum turbulent shear in the transition region was generated at Y+ = 70, and no near-wall high-shear region was seen. Stronger adverse pressure gradients appear to produce more uniform and higher t′ in the near-wall region (Y+ < 20) in both transitional and turbulent boundary layers. The instantaneous velocity signals did not show any clear turbulent/nonturbulent demarcations in the transition region. Increasingly stronger adverse pressure gradients seemed to produce large non turbulent unsteadiness (or instability waves) at a similar magnitude as the turbulent fluctuations such that the production of turbulent spots was obscured. The turbulent spots could not be identified visually or through conventional conditional-sampling schemes. In addition, the streamwise evolution of eddy viscosity, turbulent thermal diffusivity, and Prt, are also presented.

Modification of Near-Wall Structure in a Shear-Driven 3-D Turbulent Boundary Layer

2001 ◽  
Vol 124 (1) ◽  
pp. 118-126 ◽  
Author(s):  
Robert O. Kiesow ◽  
Michael W. Plesniak
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Reynolds Shear Stress ◽  
Power Spectra ◽  
Streamwise Velocity ◽  
Wall Structure ◽  
Reynolds Stresses ◽  
Planar Shear ◽  
Inner Region ◽  
Near Wall

The near-wall physics of a planar, shear-driven, 3-D turbulent boundary layer with varying strengths of crossflow are examined. Flow visualization data reveals a reduction of mean streak length by as much as 50% with increasing spanwise shear. Power spectra of velocity confirm this shift towards higher temporal frequencies, corresponding to decreased streamwise length scales. PIV measurements indicate a significant modification of the inner region of the boundary layer with increasing spanwise shear. Streamwise velocity profiles exhibit an increasing velocity deficit with increased crossflow. Increased levels of the normal Reynolds stresses u′2¯ and v′2¯ and an increase in the −u′v′¯ Reynolds shear stress are also observed. Modifications in the spanwise and transverse vorticity were also observed at higher shear rates.

Particle image velocimetry investigation of a turbulent boundary layer manipulated by spanwise wall oscillations

2002 ◽  
Vol 467 ◽  
pp. 41-56 ◽  
Author(s):  
GAETANO MARIA DI CICCA ◽  
GAETANO IUSO ◽  
PIER GIORGIO SPAZZINI ◽  
MICHELE ONORATO
Keyword(s):  
Boundary Layer ◽  
Particle Image Velocimetry ◽  
Turbulent Boundary Layer ◽  
Particle Image ◽  
Oscillation Amplitude ◽  
Research Programme ◽  
Oscillation Period ◽  
Wall Turbulence ◽  
Image Velocimetry ◽  
Near Wall

Particle image velocimetry has been applied to the study of a canonical turbulent boundary layer and to a turbulent boundary layer forced by transversal wall oscillations. This work is part of the research programme at the Politecnico di Torino aerodynamic laboratory with the objective of investigating the response of near-wall turbulence to external perturbations. Results are presented for the optimum oscillation period of 100 viscous time units and for an oscillation amplitude of 320 viscous units. As expected, turbulent velocity fluctuations are considerably reduced by the wall oscillations. Particle image velocimetry has allowed comparisons between the canonical and forced flows in an attempt to find the physical mechanisms by which the wall oscillation influences the near-wall organized motions.

Influence of large-scale motions on the frictional drag in a turbulent boundary layer

2017 ◽  
Vol 829 ◽  
pp. 751-779 ◽  
Author(s):  
Jinyul Hwang ◽  
Hyung Jin Sung
Keyword(s):  
Boundary Layer ◽  
Skin Friction ◽  
Large Scale ◽  
Wall Region ◽  
Local Skin ◽  
Velocity Fluctuations ◽  
Vortical Structures ◽  
Change Of Scale ◽  
Local Skin Friction ◽  
Near Wall

Direct numerical simulation data of a turbulent boundary layer ($Re_{\unicode[STIX]{x1D70F}}=1000$) were used to investigate the large-scale influences on the vortical structures that contribute to the local skin friction. The amplitudes of the streamwise and wall-normal swirling strengths ($\unicode[STIX]{x1D706}_{x}$and$\unicode[STIX]{x1D706}_{y}$) were conditionally sampled by measuring the large-scale streamwise velocity fluctuations ($u_{l}$). In the near-wall region, the amplitudes of$\unicode[STIX]{x1D706}_{x}$and$\unicode[STIX]{x1D706}_{y}$decreased under negative$u_{l}$rather than under positive$u_{l}$. This behaviour arose from the spanwise motions within the footprints of the large-scale low-speed ($u_{l}<0$) and high-speed structures ($u_{l}>0$). The intense spanwise motions under the footprint of positive$u_{l}$noticeably strengthened the small-scale spanwise velocity fluctuations ($w_{s}$) below the centre of the near-wall vortical structures as compared to$w_{s}$within the footprint of negative$u_{l}$. The streamwise and wall-normal components were attenuated or amplified around the modulated vortical motions, which in turn led to the dependence of the swirling strength on the$u_{l}$event. We quantified the contribution of the modulated vortical motions$\langle -w\unicode[STIX]{x1D714}_{y}\rangle$, which were related to a change-of-scale effect due to the vortex-stretching force, to the local skin friction. In the near-wall region, intense values of$\langle -w\unicode[STIX]{x1D714}_{y}\rangle$were observed for positive$u_{l}$. By contrast, these values were low for negative$u_{l}$, in connection with the amplification of$w_{s}$and$\unicode[STIX]{x1D706}_{y}$by the strong spanwise motions of the positive$u_{l}$. The resultant skin friction induced by the amplified vortical motions within$u_{l}^{+}>2$was responsible for 15 % of the total skin friction generated by the change-of-scale effect. Finally, we applied this analysis to a drag-reduced flow and found that the amplified vortical motions within the footprint of positive$u_{l}$were markedly diminished, which ultimately contributed to the total drag reduction.

Experimental observation of hairpin auto-generation events in a turbulent boundary layer

2016 ◽  
Vol 795 ◽  
pp. 611-633 ◽  
Author(s):  
Y. Jodai ◽  
G. E. Elsinga
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Shear Layer ◽  
Transition Process ◽  
Wall Region ◽  
Generation Model ◽  
Streamwise Vortices ◽  
Hairpin Vortices ◽  
Time Resolved ◽  
Near Wall

Time-resolved tomographic particle image velocimetry experiments show that new hairpin vortices are generated within a fully developed and unperturbed turbulent boundary layer. The measurements are taken at a Reynolds number based on the momentum thickness of 2038, and cover the near-wall region below $y^{+}=140$, where $y^{+}$ is the wall-normal distance in wall units. Instantaneous visualizations of the flow reveal near-wall low-speed streaks with associated quasi-streamwise vortices, retrograde inverted arch vortices, hairpin vortices and hairpin packets. The hairpin heads are observed as close to the wall as $y^{+}=30$. Examples of hairpin packet evolution reveal the development of new hairpin vortices, which are created upstream and close to the wall in a manner consistent with the auto-generation model (Zhou et al., J. Fluid Mech., vol. 387, 1999, pp. 353–396). The development of the new hairpin appears to be initiated by an approaching sweep event, which perturbs the shear layer associated with the initial packet. The shear layer rolls up, thereby forming the new hairpin head. The head subsequently connects to existing streamwise vortices and develops into a hairpin. The time scale associated with the hairpin auto-generation is 20–30 wall units of time. This demonstrates that hairpins can be created over short distances within a developed turbulent boundary layer, implying that they are not simply remnants of the laminar-to-turbulent transition process far upstream.

Sign in / Sign up

Export Citation Format

Share Document