Asymptotic expansions for laminar forced-convection heat and mass transfer Part 2. Boundary-layer flows

1966 ◽  
Vol 24 (2) ◽  
pp. 339-366 ◽  
Author(s):  
J. D. Goddard ◽  
Andreas Acrivos

This is the second of two articles by the authors dealing with asymptotic expansions for forced-convection heat or mass transfer to laminar flows. It is shown here how the method of the first paper (Acrivos & Goddard 1965), which was used to derive a higher-order term in the large Péclet number expansion for heat or mass transfer to small Reynolds number flows, can yield equally well higher-order terms in both the large and the small Prandtl number expansions for heat transfer to laminar boundary-layer flows. By means of this method an exact expression for the first-order correction to Lighthill's (1950) asymptotic formula for heat transfer at large Prandtl numbers, as well as an additional higher-order term for the small Prandtl number expansion of Morgan, Pipkin & Warner (1958), are derived. The results thus obtained are applicable to systems with non-isothermal surfaces and arbitrary planar or axisymmetric flow geometries. For the latter geometries a derivation is given of a higher-order term in the Péclet number expansion which arises from the curvature of the thermal layer for small Prandtl numbers. Finally, some applications of the results to ‘similarity’ flows are also presented.

2016 ◽  
Vol 139 (1) ◽  
Author(s):  
Jinhu Zhao ◽  
Liancun Zheng ◽  
Xinxin Zhang ◽  
Fawang Liu ◽  
Xuehui Chen

This paper investigates natural convection heat transfer of generalized Oldroyd-B fluid in a porous medium with modified fractional Darcy's law. Nonlinear coupled boundary layer governing equations are formulated with time–space fractional derivatives in the momentum equation. Numerical solutions are obtained by the newly developed finite difference method combined with L1-algorithm. The effects of involved parameters on velocity and temperature fields are presented graphically and analyzed in detail. Results indicate that, different from the classical result that Prandtl number only affects the heat transfer, it has remarkable influence on both the velocity and temperature boundary layers, the average Nusselt number rises dramatically in low Prandtl number, but increases slowly with the augment of Prandtl number. The maximum value of velocity profile and the thickness of momentum boundary layer increases with the augment of porosity and Darcy number. Moreover, the relaxation fractional derivative parameter accelerates the convection flow and weakens the elastic effect significantly, while the retardation fractional derivative parameter slows down the motion and strengthens the elastic effect.


2012 ◽  
Vol 134 (6) ◽  
Author(s):  
M. Bachiri ◽  
A. Bouabdallah

In this work, we attempt to establish a general analytical approximation of the convection heat transfer from an isothermal wedge surface to fluids for all Prandtl numbers. The flow has been assumed to be laminar and steady state. The governing equations have been written in dimensionless form using a similarity method. A simple ad hoc technique is used to solve analytically the governing equations by proposing a general formula of the velocity profile. This formula verifies the boundary conditions and the equilibrium of the governing equations in the whole spatial region and permits us to obtain analytically the temperature profiles for all Prandtl numbers and for various configurations of the wedge surface. A comparison with the numerical results is given for all spatial regions and in wide Prandtl number values. A new Nusselt number expression is obtained for various configurations of the wedge surface and compared with the numerical results in wide Prandtl number values.


This paper describes an experimental investigation of heat transfer by free convection of a fluid in a heated vertical tube, sealed at its lower end. Heated fluid adjacent to the wall is discharged from the open end into a suitably cooled large reservoir, while a central core of cool fluid is continuously drawn into the tube by way of replacement. The system constitutes an unusual case of natural convection because the two streams of fluid, moving in opposite directions, are compelled to create their own internal boundary. Such an arrangement forms a static simulation of the Schmidt system (1951) for cooling high-temperature gas turbine blades, where sealed radial passages in the blades communicate with a reservoir in the rotor drum, and large centrifugal accelerations replace that due to gravity in the static system. The use of a scaled-up static tube in large measure compensates for the relatively small gravitational acceleration, when determining the working range of Rayleigh numbers, in this case from 10 7 to 10 13 . These are based on tube length, the fluid property values being referred to tube-wall temperature. Separate assessments are made of the effect of fluid Prandtl number (covering values from 7600 to 0·69) and tube length radius ratio (ranging from 7·5 to 47·5). In laminar flow the former is not found to be significant, but the quotient of the Rayleigh number (based on radius) and tube length-radius ratio determines the ranges of three laminar flow régimes. High values of the quotient correspond to 'boundary-layer flow’ and greatest heat transfer. This is followed first by ‘impeded non-similarity flow’ and then by ‘impeded similarity flow’ as the quotient becomes smaller, where the two streams of fluid mingle. These findings are in close agreement with theoretical prediction (Lighthill 1953). Turbulence arises in two ways. For Prandtl numbers near unity, transition occurs during the laminar impeded-flow régimes, resulting in a mixing effect and reduced heat transfer. This is predicted by Lighthill, but his discussion of turbulent flow is restricted to a Prandtl number of unity. For larger Prandtl numbers, transition takes place during laminar boundary-layer flow, yielding a conventional turbulent boundary-layer régime with increased heat transfer. The mean transitional Grashof numbers (based on radius) are in the range 10 4.4 to 10 4.6 ; they compare favourably with a pre­dicted range of from 10 4.0 to 10 4.3 . The tendency for the cool entering fluid to become turbulent renders turbulent boundary-layer flow potentially unstable. Both modes of transition eventually lead to a stable ‘fully mixed' régime where the two turbulent streams mix. This causes reduced circulation and heat transfer, the extent of the reduction varying directly with length-radius ratio and inversely with Prandtl number. The régime was predicted by Lighthill, but there are considerable dis­crepancies between estimated and experimental heat-transfer rates, and in the duration of the régime. In practice it appears to persist indefinitely, whereas Lighthill forecasts its replace­ment at high Rayleigh numbers by a stable boundary-layer flow. Empirical correlations show that fully mixed flow yields optimum heat transfer at a length-radius ratio, which is determined by the Rayleigh number. The suitability of the Schmidt system for blade cooling is briefly discussed in the light of the investigation.


1973 ◽  
Vol 95 (2) ◽  
pp. 227-234 ◽  
Author(s):  
T. Cebeci

This paper presents a model for eddy conductivity and turbulent Prandtl number based on the considerations of a Stokes-type flow. The expressions obtained by the model provide continuous velocity and temperature distributions for turbulent flows and are applicable to flows with pressure gradients, mass transfer, and heat transfer. Close to the wall the turbulent Prandtl number appears to be strongly affected by the molecular Prandtl number; away from the wall it is constant, that is, it is independent of the molecular Prandtl number. Calculated results agree well with experiments, including those with fluids having both low and high Prandtl numbers. In addition the results confirm recent experimental findings, in that the mass transfer has no effect on turbulent Prandtl number.


1959 ◽  
Vol 26 (2) ◽  
pp. 161-165
Author(s):  
E. M. Sparrow ◽  
J. L. Gregg

Abstract An analysis is made for laminar forced-convection heat transfer from a flat plate to a nonisothermal free stream. An exact solution of the boundary-layer energy equation is found for the situation of linearly varying free-stream temperature. Numerical calculations are carried out for Prandtl numbers in the range 0.01 ⩽ Pr ⩽ 50. Results are presented for the change in heat transfer due to the variation in free-stream temperature. This effect decreases with increasing Prandtl number.


1959 ◽  
Vol 81 (1) ◽  
pp. 13-18 ◽  
Author(s):  
E. M. Sparrow ◽  
J. L. Gregg

The problem of laminar-film condensation on a vertical plate is attacked using the mathematical techniques of boundary-layer theory. Starting with the boundary-layer (partial differential) equations, a similarity transformation is found which reduces them to ordinary differential equations. Energy-convection and fluid-acceleration terms are fully accounted for. Solutions are obtained for values of the parameter cpΔT/hfg between 0 and 2 for Prandtl numbers between 1 and 100. These solutions take their place in the boundary-layer family along with those of Blasius, Pohlhausen, Schmidt and Beckmann, and so on. Heat-transfer results are presented. It is found that the Prandtl-number effect, which arises from retention of the acceleration terms, is very small for Prandtl numbers greater than 1.0. Low Prandtl number (0.003–0.03) heat-transfer results are given in Appendix 2, and a greater effect of the acceleration terms is displayed.


1990 ◽  
Vol 112 (4) ◽  
pp. 939-944 ◽  
Author(s):  
T.-Y. Wang ◽  
C. Kleinstreuer

A powerful similarity solution of the highly nonlinear, coupled boundary-layer equations has been developed for steady laminar mixed convection heat transfer between a rotating cone/disk and power-law fluids. Of special interest are the effects of the power-law viscosity index, a generalized local Prandtl number, the buoyancy parameter, and the type of thermal wall condition on the velocity and temperature fields and hence the skin friction coefficient and the local Nusselt number. While the momentum boundary-layer thickness increases measurably with decreasing viscosity index n, the thermal boundary-layer thickness is less affected by changes in n. The magnitude and direction of the buoyancy force influence the upward velocity profile near the wall and the temperature profiles significantly. Both Prandtl number and buoyancy parameter have a more pronounced effect on the skin friction group, SFG ~ cf, than on the heat transfer group, HTG ~ Nu.


Sign in / Sign up

Export Citation Format

Share Document