Flow of fluid of non-uniform viscosity in converging and diverging channels

1982 ◽  
Vol 117 ◽  
pp. 283-304 ◽  
Author(s):  
Alison Hooper ◽  
B. R. Duffy ◽  
H. K. Moffatt
Keyword(s):  
Reynolds Number ◽  
Velocity Profile ◽  
Viscosity Ratio ◽  
Stokes Equations ◽  
Lubrication Theory ◽  
Navier Stokes ◽  
Volume Flux ◽  
Navier Stokes Equations ◽  
Two Fluid ◽  
Converging And Diverging Channels

It is shown that the well-known Jeffery–Hamel solution of the Navier–Stokes equations admits generalization to the case in which the viscosity μ and density ρ are arbitrary functions of the angular co-ordinate θ. When |Rα| [Lt ] 1, where R is the Reynolds number and 2α the angle of divergence of the planes, lubrication theory is applicable; this limit is first treated in the context of flow in a channel of slowly varying width. The Jeffery–Hamel problem proper is treated in §§ 3–6, and the effect of varying the viscosity ratio λ in a two-fluid situation is studied. In § 5, results already familiar in the single-fluid context are recapitulated and reformulated in a manner that admits immediate adaptation to the two-fluid situation, and in § 6 it is shown that the singlefluid limit (λ → 1) is in a certain sense degenerate. The necessarily discontinuous behaviour of the velocity profile as the Reynolds number (based on volume flux) increases is elucidated. Finally, in § 7, some comments are made about the realizability of these flows and about instabilities to which they may be subject.

scholarly journals Modeling of Particle Deposition in a Two-Fluid Flow Environment

2021 ◽  
Vol 39 (3) ◽  
pp. 1001-1014
Author(s):  
Yap Yit Fatt ◽  
Afshin Goharzadeh
Keyword(s):  
Fluid Flow ◽  
Particle Deposition ◽  
Viscosity Ratio ◽  
Stokes Equations ◽  
Immiscible Fluids ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Rising Bubble ◽  
Lower Viscosity ◽  
Two Fluid

Particle deposition occurs in many engineering multiphase flows. A model for particle deposition in two-fluid flow is presented in this article. The two immiscible fluids with one carrying particles are model using incompressible Navier-Stokes equations. Particles are assumed to deposit onto surfaces as a first order reaction. The evolving interfaces: fluid-fluid interface and fluid-deposit front, are captured using the level-set method. A finite volume method is employed to solve the governing conservation equations. Model verifications are made against limiting cases with known solutions. The model is then used to investigate particle deposition in a stratified two-fluid flow and a cavity with a rising bubble. For a stratified two-fluid flow, deposition occurs more rapidly for a higher Damkholer number but a lower viscosity ratio (fluid without particle to that with particles). For a cavity with a rising bubble, deposition is faster for a higher Damkholer number and a higher initial particle concentration, but is less affected by viscosity ratio.

Approximations in Hydrodynamic Lubrication

1992 ◽  
Vol 114 (1) ◽  
pp. 14-25 ◽  
Author(s):  
R. X. Dai ◽  
Q. Dong ◽  
A. Z. Szeri
Keyword(s):  
Reynolds Number ◽  
Stokes Equations ◽  
Numerical Study ◽  
Hydrodynamic Lubrication ◽  
Lubrication Theory ◽  
Navier Stokes ◽  
Fluid Inertia ◽  
Navier Stokes Equations ◽  
Number Range ◽  
Bearing Stiffness

In this numerical study of the approximations that led Reynolds to the formulation of classical Lubrication Theory, we compare results from (1) the full Navier-Stokes equations, (2) a lubrication theory relative to the “natural,” i.e., bipolar, coordinate system of the geometry that neglects fluid inertia, and (3) the classical Reynolds Lubrication Theory that neglects both fluid inertia and film curvature. By applying parametric continuation techniques, we then estimate the Reynolds number range of validity of the laminar flow assumption of classical theory. The study demonstrates that both the Navier-Stokes and the “bipolar lubrication” solutions converge monotonically to results from classical Lubrication Theory, one from below and the other from above. Furthermore the oil-film force is shown to be invariant with Reynolds number in the range 0 < R < Rc for conventional journal bearing geometry, where Rc is the critical value of the Reynolds number at first bifurcation. A similar conclusion also holds for the off-diagonal components of the bearing stiffness matrix, while the diagonal components are linear in the Reynolds number, in accordance with the small perturbation theory of DiPrima and Stuart.

A note on the solution of the Navier-Stokes equations for a spherically symmetric expansion into a very low pressure

1973 ◽  
Vol 59 (2) ◽  
pp. 391-396 ◽  
Author(s):  
N. C. Freeman ◽  
S. Kumar
Keyword(s):  
Shock Wave ◽  
Reynolds Number ◽  
Stokes Equation ◽  
Stokes Equations ◽  
Low Pressure ◽  
Navier Stokes ◽  
Spherically Symmetric ◽  
Navier Stokes Equation ◽  
Navier Stokes Equations ◽  
Type Flow

It is shown that, for a spherically symmetric expansion of a gas into a low pressure, the shock wave with area change region discussed earlier (Freeman & Kumar 1972) can be further divided into two parts. For the Navier–Stokes equation, these are a region in which the asymptotic zero-pressure behaviour predicted by Ladyzhenskii is achieved followed further downstream by a transition to subsonic-type flow. The distance of this final region downstream is of order (pressure)−2/3 × (Reynolds number)−1/3.

On Offset Placement of a Compound Droplet in a Channel Flow

2021 ◽  
Author(s):  
Jagannath Mahato ◽  
Dhananjay Kumar Srivastava ◽  
Dinesh Kumar Chandraker ◽  
Rajaram Lakkaraju
Keyword(s):  
Viscosity Ratio ◽  
Stokes Equations ◽  
Temporal Dynamics ◽  
Flow Direction ◽  
Navier Stokes ◽  
Volume Of Fluid Method ◽  
Lateral Migration ◽  
Navier Stokes Equations ◽  
Deformation Patterns ◽  
Compound Droplet

Abstract Investigations on flow dynamics of a compound droplet have been carried out in a two-dimensional fully-developed Poiseuille flow by solving the Navier-Stokes equations with the evolution of the droplet using the volume of fluid method with interface compression. The outer droplet undergoes elongation similar to a simple droplet of same size placed under similar ambient condition in the flow direction, but, the inner droplet evolves in compressed form. The compound droplet is varied starting from the centerline towards the walls of the channel. The simulations showed that on applying an offset, asymmetric slipper-like shapes are observed as opposed to symmetric bullet-like shapes through the centerline. Temporal dynamics, deformation patterns, and droplet shell pinch-off mode vary with the offset, with induction of lateral migration. Also, investigations are done on the effect of various parameters like droplet size, Capillary number, and viscosity ratio on the deformation magnitude and lateral migration.

Free-stream coherent structures in parallel boundary-layer flows

2014 ◽  
Vol 752 ◽  
pp. 602-625 ◽  
Author(s):  
Kengo Deguchi ◽  
Philip Hall
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Coherent Structures ◽  
Free Stream ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Homotopy Continuation ◽  
Boundary Layer Flows ◽  
Navier Stokes Equations ◽  
High Reynolds

AbstractOur concern in this paper is with high-Reynolds-number nonlinear equilibrium solutions of the Navier–Stokes equations for boundary-layer flows. Here we consider the asymptotic suction boundary layer (ASBL) which we take as a prototype parallel boundary layer. Solutions of the equations of motion are obtained using a homotopy continuation from two known types of solutions for plane Couette flow. At high Reynolds numbers, it is shown that the first type of solution takes the form of a vortex–wave interaction (VWI) state, see Hall & Smith (J. Fluid Mech., vol. 227, 1991, pp. 641–666), and is located in the main part of the boundary layer. On the other hand, here the second type is found to support an equilibrium solution of the unit-Reynolds-number Navier–Stokes equations in a layer located a distance of $\def \xmlpi #1{}\def \mathsfbi #1{\boldsymbol {\mathsf {#1}}}\let \le =\leqslant \let \leq =\leqslant \let \ge =\geqslant \let \geq =\geqslant \def \Pr {\mathit {Pr}}\def \Fr {\mathit {Fr}}\def \Rey {\mathit {Re}}O(\ln \mathit{Re})$ from the wall. Here $\mathit{Re}$ is the Reynolds number based on the free-stream speed and the unperturbed boundary-layer thickness. The streaky field produced by the interaction grows exponentially below the layer and takes its maximum size within the unperturbed boundary layer. The results suggest the possibility of two distinct types of streaky coherent structures existing, possibly simultaneously, in disturbed boundary layers.

scholarly journals Determining the Tangential Velocity profile of a Rotating Fluid in a Static Container using Navier–Stokes equations

2020 ◽  
Author(s):  
RAJDEEP TAH ◽  
SARBAJIT MAZUMDAR ◽  
Krishna Kant Parida
Keyword(s):  
Angular Velocity ◽  
Velocity Profile ◽  
Velocity Gradient ◽  
Stokes Equations ◽  
Tangential Velocity ◽  
Navier Stokes ◽  
Rotating Fluid ◽  
Navier Stokes Equations ◽  
Similar Principle ◽  
Tangential Velocity Profile

The shape of the liquid surface for a fluid present in a uniformly rotating cylinder is generally determined by making a Tangential velocity gradient along the radius of the rotating cylindrical container. A very similar principle can be applied if the direction of the produced velocity gradient is reversed, for which the source of rotation will be present at the central axis of the cylindrical vessel in which the liquid is present. Now if the described system is completely closed, the angular velocity will decrease as a function of time. But when the surface of the rotating fluid is kept free, then the Tangential velocity profile would be similar to that of the Taylor-Couette Flow, with a modification that; due to formation of a curvature at the surface, the Navier-Stokes law is to be modified. Now the final equation may not seem to have a proper general solution, but can be approximated to certain solvable expressions for specific cases of angular velocity.

scholarly journals Nonlinear amplification in hydrodynamic turbulence

2021 ◽  
Vol 930 ◽  
Author(s):  
Kartik P. Iyer ◽  
Katepalli R. Sreenivasan ◽  
P.K. Yeung
Keyword(s):  
Reynolds Number ◽  
Isotropic Turbulence ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Developed Turbulence ◽  
Advection Term ◽  
Nonlinear Amplification

Using direct numerical simulations performed on periodic cubes of various sizes, the largest being $8192^3$ , we examine the nonlinear advection term in the Navier–Stokes equations generating fully developed turbulence. We find significant dissipation even in flow regions where nonlinearity is locally absent. With increasing Reynolds number, the Navier–Stokes dynamics amplifies the nonlinearity in a global sense. This nonlinear amplification with increasing Reynolds number renders the vortex stretching mechanism more intermittent, with the global suppression of nonlinearity, reported previously, restricted to low Reynolds numbers. In regions where vortex stretching is absent, the angle and the ratio between the convective vorticity and solenoidal advection in three-dimensional isotropic turbulence are statistically similar to those in the two-dimensional case, despite the fundamental differences between them.

scholarly journals Numerical Simulation of Slip effect on Lid-Driven Cavity Flow Problem for High Reynolds Number: Vorticity – Stream Function Approach

2021 ◽  
Vol 8 (3) ◽  
pp. 418-424
Author(s):  
Syed Fazuruddin ◽  
Seelam Sreekanth ◽  
G. Sankara Sekhar Raju
Keyword(s):  
Reynolds Number ◽  
Stream Function ◽  
Stokes Equations ◽  
Cavity Flow ◽  
Partial Slip ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Driven Cavity ◽  
Slip Conditions ◽  
Driven Cavity Flow

Incompressible 2-D Navier-stokes equations for various values of Reynolds number with and without partial slip conditions are studied numerically. The Lid-Driven cavity (LDC) with uniform driven lid problem is employed with vorticity - Stream function (VSF) approach. The uniform mesh grid is used in finite difference approximation for solving the governing Navier-stokes equations and developed MATLAB code. The numerical method is validated with benchmark results. The present work is focused on the analysis of lid driven cavity flow of incompressible fluid with partial slip conditions (imposed on side walls of the cavity). The fluid flow patterns are studied with wide range of Reynolds number and slip parameters.

An Implicit Multigrid Scheme for the Compressible Navier-Stokes Equations With Low-Reynolds-Number Turbulence Closure

1998 ◽  
Vol 120 (2) ◽  
pp. 257-262 ◽  
Author(s):  
Peter Gerlinger ◽  
Dieter Bru¨ggemann
Keyword(s):  
Reynolds Number ◽  
Stokes Equations ◽  
Low Reynolds Number ◽  
Convergence Acceleration ◽  
Iterative Solvers ◽  
Turbulence Closure ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Low Reynolds ◽  
Turbulence Transport

A multigrid method for convergence acceleration is used for solving coupled fluid and turbulence transport equations. For turbulence closure a low-Reynolds-number q-ω turbulence model is employed, which requires very fine grids in the near wall regions. Due to the use of fine grids, convergence of most iterative solvers slows down, making the use of multigrid techniques especially attractive. However, special care has to be taken on the strong nonlinear turbulent source terms during restriction from fine to coarse grids. Due to the hyperbolic character of the governing equations in supersonic flows and the occurrence of shock waves, modifications to standard multigrid techniques are necessary. A simple and effective method is presented that enables the multigrid scheme to converge. A strong reduction in the required number of multigrid cycles and work units is achieved for different test cases, including a Mack 2 flow over a backward facing step.

Sign in / Sign up

Export Citation Format

Share Document