The interacting boundary-layer flow due to a vortex approaching a cylinder

1997 ◽  
Vol 346 ◽  
pp. 319-343 ◽  
Author(s):  
Z. XIAO ◽  
O. R. BURGGRAF ◽  
A. T. CONLISK
Keyword(s):  
Boundary Layer ◽  
Three Dimensional ◽  
Boundary Layer Separation ◽  
Two Dimensions ◽  
Unsteady Boundary Layer ◽  
Reynolds Number Flow ◽  
Boundary Layer Equations ◽  
Number Flow ◽  
Layer Flow ◽  
High Reynolds

In this paper the solution to the three-dimensional and unsteady interacting boundary-layer equations for a vortex approaching a cylinder is calculated. The flow is three-dimensional and unsteady. The purpose of this paper is to enhance the understanding of the structure in three-dimensional unsteady boundary-layer separation commonly observed in a high-Reynolds-number flow. The short length scales associated with the boundary-layer eruption process are resolved through an efficient and effective moving adaptive grid procedure. The results of this work suggest that like its two-dimensional counterpart, the three-dimensional unsteady interacting boundary layer also terminates in a singularity at a finite time. Furthermore, the numerical calculations confirm the theoretical analysis of the singular structure in two dimensions for the interacting boundary layer due to Smith (1988).

scholarly journals Triple-deck analysis of transonic high Reynolds number flow through slender channels

2014 ◽  
Vol 372 (2020) ◽  
pp. 20130346 ◽  
Author(s):  
A. Kluwick ◽  
M. Kornfeld
Keyword(s):  
Boundary Layer ◽  
Three Dimensional ◽  
Boundary Layer Separation ◽  
Channel Height ◽  
Micro Electro Mechanical Systems ◽  
Reynolds Number Flow ◽  
Flow Phenomena ◽  
Classical Boundary ◽  
Number Flow ◽  
High Reynolds

In this work, laminar transonic weakly three-dimensional flows at high Reynolds numbers in slender channels, as found in microsupersonic nozzles and turbomachines of micro-electro-mechanical systems, are considered. The channel height is taken so small that the viscous wall layers forming at the channel walls start to interact strongly rather than weakly with the inviscid core flow and, therefore, the classical boundary layer approach fails. The resulting viscous–inviscid interaction problem is formulated using matched asymptotic expansions and found to be governed by a triple-deck structure. As a consequence, the properties of the predominantly inviscid core region and the viscous wall layers have to be calculated simultaneously in the interaction region. Weakly three-dimensional effects caused by surface roughness, upstream propagating flow perturbations, boundary layer separation as well as bifurcating solutions are discussed. Representative results for subsonic as well as supersonic conditions are presented, and the importance of these flow phenomena in technical applications as, for example, a means to reduce shock losses through the use of deformed geometry is addressed.

Stability of high-Reynolds-number flow in a collapsible channel

2013 ◽  
Vol 714 ◽  
pp. 536-561 ◽  
Author(s):  
D. Pihler-Puzović ◽  
T. J. Pedley
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Small Amplitude ◽  
High Reynolds Number ◽  
Long Wavelength ◽  
Reynolds Number Flow ◽  
Boundary Layer Equations ◽  
Number Flow ◽  
High Reynolds ◽  
Viscous Boundary

AbstractWe study high-Reynolds-number flow in a two-dimensional collapsible channel in the asymptotic limit of wall deformations confined to the viscous boundary layer. The system is modelled using interactive boundary-layer equations for a Newtonian incompressible fluid coupled to the freely moving elastic wall under constant tension and external pressure. The deformation of the membrane is assumed to have small amplitude and long wavelength, whereas the flow comprises the inviscid core and the viscous boundary layers on both walls coupled to each other and to the membrane deformation. Firstly, by linking the interactive boundary-layer model to the small-amplitude, long-wavelength inviscid analysis, we conclude that the model is valid only when the pressure perturbations are fixed downstream from the wall indentation, contrary to the common assumption of classical boundary-layer theory. Next we explore possible steady states of the system, showing that a unique steady solution exists when the pressure is fixed precisely at the downstream end of the membrane, but there are multiple states possible if the pressure is specified further downstream. We examine the stability of these states by solving the generalized eigenvalue problem for perturbations to the nonlinear steady solutions and also by performing time integration of the full boundary-layer equations. Surprisingly, we find that no self-excited oscillations develop in the collapsible channel systems with finite-amplitude deformations. Instead, for each point in the parameter space, with the exception of points subject to numerical instabilities associated with the boundary-layer equations, exactly one of the steady states is predicted to be stable. We discuss these findings in relation to the results reported previously in the literature.

scholarly journals The onset of instability in unsteady boundary-layer separation

1996 ◽  
Vol 315 ◽  
pp. 223-256 ◽  
Author(s):  
K. W. Cassel ◽  
F. T. Smith ◽  
J. D. A. Walker
Keyword(s):  
Boundary Layer ◽  
Boundary Layer Separation ◽  
External Pressure ◽  
Theoretical Description ◽  
Unsteady Boundary Layer ◽  
Layer Separation ◽  
Boundary Layer Equations ◽  
Dimensional Boundary ◽  
High Reynolds ◽  
Inviscid Instability

The process of unsteady two-dimensional boundary-layer separation at high Reynolds number is considered. Solutions of the unsteady non-interactive boundary-layer equations are known to develop a generic separation singularity in regions where the pressure gradient is prescribed and adverse. As the boundary layer starts to separate from the surface, however, the external pressure distribution is altered through viscous—inviscid interaction just prior to the formation of the separation singularity; hitherto this has been referred to as the first interactive stage. A numerical solution of this stage is obtained here in Lagrangian coordinates. The solution is shown to exhibit a high-frequency inviscid instability resulting in an immediate finite-time breakdown of this stage. The presence of the instability is confirmed through a linear stability analysis. The implications for the theoretical description of unsteady boundary-layer separation are discussed, and it is suggested that the onset of interaction may occur much sooner than previously thought.

Vortex Suppression Efficiency of Discontinuous Helicoidal Fins

2007 ◽  
Author(s):  
Antonio Pinto ◽  
Riccardo Broglia ◽  
Elena Ciappi ◽  
Andrea Di Mascio ◽  
Emilio F. Campana ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Computational Time ◽  
Reynolds Number Flow ◽  
Flow Past A Cylinder ◽  
Helical Strakes ◽  
Unsteady Rans ◽  
Number Flow ◽  
Offshore Industry ◽  
Good Trade ◽  
High Reynolds

Vortex-Induced Vibration (VIV) is one of the most demanding areas in the offshore industry, and detailed investigation of the fluid-structure interaction is becoming fundamental for designing new structures able to reduce VIV phenomenon. To carry on such analysis, and get reliable results in term of global coefficients, the correct modelling of turbulence, boundary layer, and separated flows is required. Nonetheless, the more accurate is the simulation, the more costly is the computation. Unsteady RANS simulations provide a good trade-off between numerical accuracy and computational time. This paper presents the analysis of the flow past a cylinder with several three-dimensional helical fins at high Reynolds number. Flow field, vortical structures, and response frequency patterns are analysed. Spectral analysis of data is performed to identify carrier frequencies, deemed to be critical due to the induced vibration of the whole structure. Finally, helical strakes efficiency in reducing the riser vibrations is also addressed, through direct consideration on the carrier shedding frequency.

Three-Dimensional Numerical Simulations of Circular Cylinders Undergoing Two Degree-of-Freedom Vortex-Induced Vibrations

2006 ◽  
Author(s):  
Juan P. Pontaza ◽  
Hamn-Ching Chen
Keyword(s):  
Numerical Simulations ◽  
Three Dimensional ◽  
Operating Conditions ◽  
Degree Of Freedom ◽  
Circular Cylinders ◽  
Time Step ◽  
Reynolds Number Flow ◽  
Number Flow ◽  
High Reynolds ◽  
Two Degree Of Freedom

In an effort to gain a better understanding of the VIV phenomena, we present three-dimensional numerical simulations of VIV of circular cylinders. We consider operating conditions that correspond to high Reynolds number flow, low structural damping, and allow for two-degree of freedom motion. The numerical implementation makes use of overset (Chimera) grids, in a multiple block environment where the workload associated with the blocks is distributed among multiple processors working in parallel. The three-dimensional grids around the cylinder are allowed to undergo arbitrary motions with respect to fixed background grids, eliminating the need for tedious grid regeneration at every time step.

Coherent structures in coflowing jets and wakes

1978 ◽  
Vol 88 (3) ◽  
pp. 451-463 ◽  
Author(s):  
A. E. Perry ◽  
T. T. Lim
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Glass Tube ◽  
Reynolds Numbers ◽  
Reynolds Number Flow ◽  
Naturally Occurring ◽  
Number Flow ◽  
High Reynolds ◽  
Scale Motion

By applying small lateral oscillations to a glass tube from which smoke was issuing, perfectly periodic coflowing jets and wake structures were produced at Reynolds numbers of order 300-1000. These structures remained coherent over long streamwise distances and appeared to be perfectly frozen when viewed under stroboscopic light which was synchronized with the disturbing oscillation. By the use of strobing laser beams, longitudinal sections of the structures were photographed and an account of the geometry of these structures is reported.When the tube was unforced, similar structures occurred but they modulated in scale and frequency, and their orientation was random.A classification of structures is presented and examples are demonstrated in naturally occurring situations such as smoke from a cigarette, the wake behind a three-dimensional blunt body, and the high Reynolds number flow in a plume from a chimney. It is suggested that an examination of these structures may give some insight into the large-scale motion in fully turbulent flow.

Three-Dimensional Boundary-Layer Flow About an Ablating Slender Cone

1969 ◽  
Vol 91 (4) ◽  
pp. 632-648 ◽  
Author(s):  
T. K. Fannelop ◽  
P. C. Smith
Keyword(s):  
Boundary Layer ◽  
Boundary Layer Flow ◽  
Cone Angle ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Low Reynolds Numbers ◽  
Boundary Layer Equations ◽  
Transverse Curvature ◽  
Dimensional Boundary ◽  
Layer Flow

A theoretical analysis is presented for three-dimensional laminar boundary-layer flow about slender conical vehicles including the effect of transverse surface curvature. The boundary-layer equations are solved by standard finite difference techniques. Numerical results are presented for hypersonic flow about a slender blunted cone. The influences of Reynolds number, cone angle, and mass transfer are studied for both symmetric flight and at angle-of-attack. The effects of transverse curvature are substantial at the low Reynolds numbers considered and are enhanced by blowing. The crossflow wall shear is largely unaffected by transverse curvature although the peak velocity is reduced. A simplified “channel flow” analogy is suggested for the crossflow near the wall.

On three-dimensional boundary layer flow over surface irregularities

1980 ◽  
Vol 373 (1754) ◽  
pp. 311-329 ◽  
Keyword(s):  
Boundary Layer ◽  
Initial Conditions ◽  
Three Dimensional ◽  
Iterative Solution ◽  
Solution Technique ◽  
Parabolic Boundary ◽  
Boundary Layer Equations ◽  
Surface Irregularities ◽  
Dimensional Boundary ◽  
Layer Flow

The three-dimensional pipeflow boundary layer equations of Smith (1976) are shown to apply to certain external flow problems, and a numerical method for their solution is developed. The method is used to study flow over surface irregularities, and some three-dimensional separated flows are calculated. Upstream influence in the form of so-called ‘free interactions’ requires an iterative solution technique, in which the initial conditions for the parabolic boundary layer equations must be determined to satisfy a downstream condition

Sign in / Sign up

Export Citation Format

Share Document