The radiocarbon dating laboratory of the Illinois State Geological Survey has been established to satisfy a growing need for radiocarbon dates for an active Pleistocene research program. Because of the age and type of material dated, the benzene liquid scintillation counting method is employed in this laboratory. The detailed chemical procedure for converting carbon to benzene has been published by Noakes, Kim, and Stipp (1965) and Noakes, Kim, and Akers (1967); however, the procedures for benzene synthesis and sample counting are briefly explained below to clarify this laboratory's procedure.An organic sample, such as peat, organic silt, or wood, is burned and the CO2 evolved is absorbed in NH4OH. SrCl2 solution is added to precipitate the carbonate, and the solution plus precipitate is boiled and cooled before filtration of SrCO3. The SrCO3 is acidified with dilute H3PO4 to liberate CO2 in a closed system, and the CO2 is converted to C2H2, as reported by Barker (1953). In this method, 2.4 gm of dry packed lithium, obtainable from the Lithium Corporation of America, is used for each liter of CO2 that is converted to C2H2. Trimerization of the C2H2 to form C6H6 is accomplished using a vanadium-alumina catalyst.To the C6H6 synthesized from the sample carbon, 2 cc of toluene containing 100 mg Butyl-PBD, 2-(4-tert-Butylphenyl)-5-(4-Biphenylyl)-1,3,4-Oxadiazole, are added, and this mixture is made to a total volume of 10 cc with spectrograde C6H6. A modified Packard Instrument Co. liquid scintillation spectrometer (Model 3375) is used for measurement of C14 activity.Ages are calculated from a C14 half-life of 5568 years, and the standard deviation (1σ) is based only on counting errors; however, if calculated error is less than 200 years, 200 years is chosen as one standard deviation (1σ).
Illinois State Geological Survey Radiocarbon Dates V
