Structure design and kinematics of a robot manipulator

Robotica ◽  
1988 ◽  
Vol 6 (4) ◽  
pp. 299-309 ◽  
Author(s):  
Kesheng Wang ◽  
Terje K. Lien
Keyword(s):  
Numerical Solution ◽  
Closed Form ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Robot Manipulator ◽  
Closed Form Solution ◽  
Form Solution ◽  
Structure Design ◽  
General Algorithm ◽  
6 Degrees Of Freedom

SUMMARYIn this paper we show that a robot manipulator with 6 degrees of freedom can be separated into two parts: arm with the first three joints for major positioning and wrist with the last three joints for major orienting. We propose 5 arms and 2 wrists as basic construction for commercially robot manipulators. This kind of simplification can lead to a general algorithm of inverse kinematics for the corresponding configuration of different combinations of arm and wrist. The approaches for numerical solution and closed form solution presented in this paper are very efficient and easy for calculating the inverse kinematics of robot manipulator.

Development of a new buffing robot manipulator for shoes

Robotica ◽  
2008 ◽  
Vol 26 (1) ◽  
pp. 55-62 ◽  
Author(s):  
Hyeung-Sik Choi ◽  
Gyu-Deuk Hwang ◽  
Sam-Sang You
Keyword(s):  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Robot Manipulator ◽  
Closed Form Solution ◽  
Electronic System ◽  
Form Solution ◽  
Graphic User Interface ◽  
Test Results ◽  
C Language ◽  
Communication Program

SUMMARYThis paper presents analysis and experimental verifications of a new robot manipulator with five degrees of freedom developed for the buffing operation of shoes. First, the forward and inverse kinematics are analyzed. Next, an analytic closed-form solution is rigorously derived for the joint angles corresponding to the position and orientation of the end-effector in Cartesian coordinates. A control system, including input/output interfaces and the related electronic system, is designed for the control of the mechanical structure of the buffing robot. Then, peripheral systems integrated with the conveyer, transfer device, and fixture device are designed for the sequential buffing process of shoes. Also, a graphic user interface (GUI) program including the forward/inverse kinematics, control algorithm, and communication program to interact the robot with the peripheral systems is developed by using visual C++ language. A new flexible toolholder (FTH) is proposed to compensate for the excessive applied force between deburring tools and shoes. Finally, the test results are provided to demonstrate the effectiveness of the proposed scheme.

3D Modeling and Closed-Form Inverse Kinematics Solution for 6dof Surgical Robot

2013 ◽  
Vol 455 ◽  
pp. 533-538
Author(s):  
Edris Farah ◽  
Shao Gang Liu
Keyword(s):  
Closed Form ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Closed Form Solution ◽  
Inverse Kinematic ◽  
Form Solution ◽  
Surgical Robot ◽  
Decoupling Method ◽  
Six Degrees Of Freedom ◽  
Inverse Kinematics Problem

Since robots began to inter the medical fields, more research efforts and more attention have been given to this kind of robots. In this paper six degrees of freedom surgical robot was studied. The Denavit-Hartenberg parameters of the robot have been computed and 3D model has been built by using open source robotics toolbox. The paper also discussed a closed form solution for the inverse kinematics problem by using inverse kinematic decoupling method.

scholarly journals Existence Conditions and General Solutions of Closed-form Inverse Kinematics for Revolute Serial Robots

2019 ◽  
Vol 9 (20) ◽  
pp. 4365 ◽  
Author(s):  
Wang Shanda ◽  
Luo Xiao ◽  
Luo Qingsheng ◽  
Han Baoling
Keyword(s):  
Closed Form ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Closed Form Solution ◽  
Form Solution ◽  
Algebraic Equations ◽  
Closed Form Solutions ◽  
Serial Robots ◽  
Existence Conditions ◽  
Low Degrees

This study proposes a method for judging the existence of closed-form inverse kinematics solutions based on the Denavit–Hartenberg (DH) model. In this method, serial robots with closed-form solutions are described using three types of sub-problems from the viewpoint of solving algebraic equations. If a serial robot can be described using these three types of sub-problems, i.e., if the inverse kinematics problems can be solved by several basic problems, then there is a closed-form solution. Based on the above method, we design a set of universal closed-form inverse kinematics solving algorithms. Since there is a definite formula solution for the three types of sub-problems, the joint angles can be rapidly determined. In addition, because the DH parameters can directly reflect the linkage of the robot, the judgment of the sub-problems is also quick and accurate. More importantly, the algorithm can be applied to serial robots with low degrees of freedom. This enables the algorithm to not only quickly and accurately solve inverse kinematics problems but also to exhibit high universality. This proposed theory improves the existence conditions for closed-form reverse solutions and further promotes the development of motion control techniques for serial robots.

scholarly journals A Parallel Manipulator with Planar Configurable Platform and Three End-Effectors

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Jaime Gallardo-Alvarado ◽  
Jesus H. Tinajero-Campos
Keyword(s):  
Kinematic Analysis ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Robot Manipulator ◽  
Closed Form Solution ◽  
Form Solution ◽  
Terminal Link ◽  
Planar Parallel Manipulator ◽  
End Effectors ◽  
Newton Homotopy

This work reports on the kinematic analysis of a planar parallel manipulator endowed with a configurable platform assembled with six terminal links serially connected by means of revolute joints. This topology allows the robot manipulator to dispose of three relative degrees of freedom owing to the mobility of an internal closed-loop chain. Therefore, the proposed robot manipulator can admit three end-effectors. The forward displacement analysis of the configurable planar parallel manipulator is easily achieved based on unknown coordinates denoting the pose of each terminal link. Thereafter, the analysis leads to twelve quadratic equations which are numerically solved by means of the Newton homotopy method. Furthermore, a closed-form solution is available for the inverse position analysis. On the contrary, the instantaneous kinematics of the robot manipulator is investigated by means of the theory of screws. Numerical examples are included with the purpose to illustrate the method of kinematic analysis.

Sign in / Sign up

Export Citation Format

Share Document