Direct Visualization of Solid Electrolyte Interphase Formation in Lithium-Ion Batteries with In Situ Electrochemical Transmission Electron Microscopy

2014 ◽  
Vol 20 (4) ◽  
pp. 1029-1037 ◽  
Author(s):  
Raymond R. Unocic ◽  
Xiao-Guang Sun ◽  
Robert L. Sacci ◽  
Leslie A. Adamczyk ◽  
Daan Hein Alsem ◽  
...  

AbstractComplex, electrochemically driven transport processes form the basis of electrochemical energy storage devices. The direct imaging of electrochemical processes at high spatial resolution and within their native liquid electrolyte would significantly enhance our understanding of device functionality, but has remained elusive. In this work we use a recently developed liquid cell for in situ electrochemical transmission electron microscopy to obtain insight into the electrolyte decomposition mechanisms and kinetics in lithium-ion (Li-ion) batteries by characterizing the dynamics of solid electrolyte interphase (SEI) formation and evolution. Here we are able to visualize the detailed structure of the SEI that forms locally at the electrode/electrolyte interface during lithium intercalation into natural graphite from an organic Li-ion battery electrolyte. We quantify the SEI growth kinetics and observe the dynamic self-healing nature of the SEI with changes in cell potential.

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Bing Han ◽  
Yucheng Zou ◽  
Zhen Zhang ◽  
Xuming Yang ◽  
Xiaobo Shi ◽  
...  

AbstractCryogenic transmission electron microscopy (cryo-TEM) is a valuable tool recently proposed to investigate battery electrodes. Despite being employed for Li-based battery materials, cryo-TEM measurements for Na-based electrochemical energy storage systems are not commonly reported. In particular, elucidating the chemical and morphological behavior of the Na-metal electrode in contact with a non-aqueous liquid electrolyte solution could provide useful insights that may lead to a better understanding of metal cells during operation. Here, using cryo-TEM, we investigate the effect of fluoroethylene carbonate (FEC) additive on the solid electrolyte interphase (SEI) structure of a Na-metal electrode. Without FEC, the NaPF6-containing carbonate-based electrolyte reacts with the metal electrode to produce an unstable SEI, rich in Na2CO3 and Na3PO4, which constantly consumes the sodium reservoir of the cell during cycling. When FEC is used, the Na-metal electrode forms a multilayer SEI structure comprising an outer NaF-rich amorphous phase and an inner Na3PO4 phase. This layered structure stabilizes the SEI and prevents further reactions between the electrolyte and the Na metal.


Nano Energy ◽  
2019 ◽  
Vol 56 ◽  
pp. 619-640 ◽  
Author(s):  
Justin Woods ◽  
Nabraj Bhattarai ◽  
Puskar Chapagain ◽  
Yuehai Yang ◽  
Suman Neupane

2017 ◽  
Vol 53 (98) ◽  
pp. 13125-13128 ◽  
Author(s):  
Jinyun Liu ◽  
Xirong Lin ◽  
Xi Chen ◽  
Zihan Shen ◽  
Miaofang Chi ◽  
...  

A novel hybrid anode consisting of tin encapsulated by double nets is presented, which is demonstrated via in situ transmission electron microscopy.


Inorganics ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 85
Author(s):  
Maryam Golozar ◽  
Raynald Gauvin ◽  
Karim Zaghib

This work summarizes the most commonly used in situ techniques for the study of Li-ion batteries from the micro to the atomic level. In situ analysis has attracted a great deal of interest owing to its ability to provide a wide range of information about the cycling behavior of batteries from the beginning until the end of cycling. The in situ techniques that are covered are: X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and Scanning Transmission Electron Microscopy (STEM). An optimized setup is required to be able to use any of these in situ techniques in battery applications. Depending on the type of data required, the available setup, and the type of battery, more than one of these techniques might be needed. This study organizes these techniques from the micro to the atomic level, and shows the types of data that can be obtained using these techniques, their advantages and their challenges, and possible strategies for overcoming these challenges.


2020 ◽  
Author(s):  
Tingting Yang ◽  
Hui Li ◽  
Yongfu Tang ◽  
Jingzhao Chen ◽  
Hongjun Ye ◽  
...  

Abstract The growth of lithium (Li) whiskers is detrimental to Li batteries. However, it remains a challenge to directly track Li whisker growth. Here we report in situ observations of electrochemically induced Li deposition under a CO2 atmosphere inside an environmental transmission electron microscope. We find that the morphology of individual Li deposits is strongly influenced by the competing processes of cracking and self-healing of the solid electrolyte interphase (SEI). When cracking overwhelms self-healing, the directional growth of Li whiskers predominates. In contrast, when self-healing dominates over cracking, the isotropic growth of round Li particles prevails. The Li deposition rate and SEI constituent can be tuned to control the Li morphologies. We reveal a new “weak-spot” mode of Li dendrite growth, which is attributed to the operation of the Bardeen-Herring growth mechanism in the whisker’s cross section. This work has implications for the control of Li dendrite growth in Li batteries.


Sign in / Sign up

Export Citation Format

Share Document