scholarly journals LR White Flat Embedding of Cells Grown on Coverslips

2000 ◽  
Vol 8 (9) ◽  
pp. 34-35
Author(s):  
Tamara Howard
Keyword(s):  
Lr White ◽  
To Come ◽  
Flat Embedding

We do this two different ways, using polyethylene (PE) molds or aluminum weigh boats, depending on the sample. You can either heat- or UV-cure these molds – just change the type of “lid” on the embedding mold.The PE molds are used when the coverslip can be made to fit in the mold. We use JB-4-type molds, available from your favorite microscopy supplier. The key to using these molds is that they have to be pre-treated…fill the inner cup of the mold with LR White, cover with an aluminum JB-4 chuck (try to have enough resin in the mold to come up around the base of the chuck), and polymerize in a 60° C oven for a day or two, until the resin is hard. The Al chuck can usually be removed by hand, but a flathead screwdriver used as a pry will help pop it off if you have trouble.

scholarly journals LR White Flat Embedding Of Cells Grown On Coverslips

2000 ◽  
Vol 8 (10) ◽  
pp. 26-26
Author(s):  
Tamara Howard
Keyword(s):  
Lr White ◽  
To Come ◽  
Flat Embedding

We do this two different ways, using polyethylene (PE) molds or aluminum weigh boats, depending on the sample, You can either heat- or UV-cure these molds-just change the type of “lid” on the embedding mold.The PE molds are used when the coverslip can be made to fit in the mold. We use JB-4-type molds, available from your favorite microscopy supplier. The key to using these molds is that they have to be pre-treated...fill the inner cup of the mold with LR White, cover with an aluminum JB-4 chuck (try to have enough resin in the mold to come up around the base of the chuck), and polymerize in a 60° C oven for a day or two, until the resin is hard.

Flat embedding of microorganisms on slides with LR white for immunocytochemistry

1993 ◽  
Vol 26 (4) ◽  
pp. 352-353 ◽  
Author(s):  
Peter A. Vesk ◽  
Teresa P. Dibbayawan ◽  
Maret Vesk
Keyword(s):  
Lr White ◽  
Flat Embedding

Two Methods for Flat Embedding Sections in LR White Cut from Paraffin Blocks

1991 ◽  
Vol 66 (2) ◽  
pp. 89-92 ◽  
Author(s):  
Antonio Migheli ◽  
Angelo Attanasio
Keyword(s):  
Lr White ◽  
Flat Embedding

Investor-State Dispute Settlement under NAFTA Chapter 11: The Shape of Things to Come?

1998 ◽  
Vol 35 ◽  
pp. 263-290
Author(s):  
J. Anthony VanDuzer
Keyword(s):  
Free Trade Agreement ◽  
Dispute Settlement ◽  
Trade Agreement ◽  
Minimum Standards ◽  
The North ◽  
State Behaviour ◽  
Nafta Chapter 11 ◽  
To Come ◽  
The Right

SummaryRecently, there has been a proliferation of international agreements imposing minimum standards on states in respect of their treatment of foreign investors and allowing investors to initiate dispute settlement proceedings where a state violates these standards. Of greatest significance to Canada is Chapter 11 of the North American Free Trade Agreement, which provides both standards for state behaviour and the right to initiate binding arbitration. Since 1996, four cases have been brought under Chapter 11. This note describes the Chapter 11 process and suggests some of the issues that may arise as it is increasingly resorted to by investors.

Scanning Electron Microscopy-cuticular Lesions on the Roundworm Ascaris Suum

1970 ◽  
Vol 28 ◽  
pp. 114-115
Author(s):  
P. A. Madden ◽  
W. R. Anderson
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Freeze Drying ◽  
Room Temperature ◽  
Secondary Electron ◽  
Distilled Water ◽  
Freeze Dried ◽  
Silver Paint ◽  
To Come ◽  
Scanning Electron

The intestinal roundworm of swine is pinkish in color and about the diameter of a lead pencil. Adult worms, taken from parasitized swine, frequently were observed with macroscopic lesions on their cuticule. Those possessing such lesions were rinsed in distilled water, and cylindrical segments of the affected areas were removed. Some of the segments were fixed in buffered formalin before freeze-drying; others were freeze-dried immediately. Initially, specimens were quenched in liquid freon followed by immersion in liquid nitrogen. They were then placed in ampuoles in a freezer at −45C and sublimated by vacuum until dry. After the specimens appeared dry, the freezer was allowed to come to room temperature slowly while the vacuum was maintained. The dried specimens were attached to metal pegs with conductive silver paint and placed in a vacuum evaporator on a rotating tilting stage. They were then coated by evaporating an alloy of 20% palladium and 80% gold to a thickness of approximately 300 A°. The specimens were examined by secondary electron emmission in a scanning electron microscope.

Sign in / Sign up

Export Citation Format

Share Document