Novel SRR-loaded CPW-fed UWB antenna with wide band-notched characteristics

2016 ◽  
Vol 9 (4) ◽  
pp. 875-880 ◽  
Author(s):  
Haijun Peng ◽  
Chunhua Wang ◽  
Lv Zhao ◽  
Jun Liu

This paper presents the design of a split-ring resonators (SRR) loaded coplanar waveguide-fed ultra-wide band (UWB) antenna. As using the electromagnetic coupling SRR connected by open-ended microstrip lines, this UWB antenna achieves wide band-notched characteristics. The frequency of the proposed antenna operates from 2.37 to 10.93 GHz with a broad notch band covers from 4.96 to 6.15 GHz (IEEE 802.11.ac), the relative stopped bandwidth of the notch band achieves 20.42%. Besides, theoretical analysis and experimental results are proposed to illustrate and validate this proposed antenna.

Author(s):  
Lei Li ◽  
Jingchang Nan ◽  
Jing Liu ◽  
Chengjian Tao

Abstract A compact ultrawideband (UWB) antenna with reconfigurable triple band notch characteristics is proposed in this paper. The antenna consists of a coplanar waveguide-fed top-cut circular-shaped radiator with two etched C-shaped slots, a pair of split-ring resonators (SRRs) on the backside and four p-type intrinsic n-type (PIN) diodes integrated in the slots and SRRs. By controlling the current distribution in the slots and SRRs, the antenna can realize eight band notch states with independent switch ability, which allows UWB to coexist with 5G (3.3–4.4 GHz)/WiMAX (3.3–3.6 GHz), WLAN (5.15–5.825 GHz), and X-band (7.9–8.4 GHz) bands without interference. By utilizing a nested structure of C-shaped slots and SRRs on the backside, a compact size of 18 × 19.5 mm2 is achieved along with multimode triple band notch reconfigurability. The antenna covers a bandwidth of 3.1–10.6 GHz. A prototype is fabricated and tested. The simulated and experimental results are in good agreement.


2003 ◽  
Vol 40 (1) ◽  
pp. 3-6 ◽  
Author(s):  
F. Falcone ◽  
F. Martín ◽  
J. Bonache ◽  
R. Marqués ◽  
M. Sorolla

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
M. M. Islam ◽  
M. R. I. Faruque ◽  
M. T. Islam

A band-removal property employing microwave frequencies using complementary split ring resonators (CSRRs) is applied to design a compact UWB antenna wishing for the rejection of some frequency band, which is meanwhile exercised by the existing wireless applications. The reported antenna comprises optimization of a circular radiating patch, in which slotted complementary SRRs are implanted. It is printed on low dielectric FR4 substrate material fed by a partial ground plane and a microstrip line. Validated results exhibit that the reported antenna shows a wide bandwidth covering from 3.45 to more than 12 GHz, with a compact dimension of 22 × 26 mm2, and VSWR < 2, observing band elimination of 5.5 GHz WLAN band.


2019 ◽  
Vol 46 (15) ◽  
pp. 2127-2133
Author(s):  
Chang Ding ◽  
Fan-Yi Meng ◽  
Hui-Lin Mu ◽  
Jian-Qiao Han ◽  
Chuan-Hong Zhao ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document