Suppression of Glyphosate-resistant Canada Fleabane (Conyza canadensis) in Corn with Cover Crops Seeded after Wheat Harvest the Previous Year

2018 ◽  
Vol 32 (3) ◽  
pp. 244-250 ◽  
Author(s):  
Taïga B. Cholette ◽  
Nader Soltani ◽  
David C. Hooker ◽  
Darren E. Robinson ◽  
Peter H. Sikkema
Keyword(s):  
Cover Crops ◽  
Weed Management ◽  
Cover Crop ◽  
Management Strategies ◽  
Late Summer ◽  
Growing Season ◽  
Integrated Weed Management ◽  
Crop Species ◽  
Herbicide Resistant ◽  
Crimson Clover

AbstractGlyphosate-resistant (GR) and multiple herbicide–resistant (groups 2 and 9) Canada fleabane have been confirmed in 30 and 23 counties in Ontario, respectively. The widespread incidence of herbicide-resistant Canada fleabane highlights the importance of developing integrated weed management strategies. One strategy is to suppress Canada fleabane using cover crops. Seventeen different cover crop monocultures or polycultures were seeded after winter wheat harvest in late summer to determine GR Canada fleabane suppression in corn grown the following growing season. All cover crop treatments seeded after wheat harvest suppressed GR Canada fleabane in corn the following year. At 4 wk after cover crop emergence (WAE), estimated cover crop ground cover ranged from 31% to 68%, a density of 124 to 638 plants m–2, and a range of biomass from 29 to 109 g m–2, depending on cover crop species. All of the cover crop treatments suppressed GR Canada fleabane in corn grown the following growing season from May to September compared to the no cover crop control. Among treatments evaluated, annual ryegrass (ARG), crimson clover (CC)/ARG, oilseed radish (OSR)/CC/ARG, and OSR/CC/cereal rye (CR) were the best treatments for the suppression of GR Canada fleabane in corn. ARG alone or in combination with CC provided the most consistent GR Canada fleabane suppression, density reduction, and biomass reduction in corn. Grain corn yields were not affected by the use of the cover crops evaluated for Canada fleabane suppression.

scholarly journals Assessing the Economic Impact of Inversion Tillage, Cover Crops, and Herbicide Regimes in Palmer Amaranth(Amaranthus palmeri)Infested Cotton

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Leah M. Duzy ◽  
Andrew J. Price ◽  
Kipling S. Balkcom ◽  
Jatinder S. Aulakh
Keyword(s):  
Cover Crops ◽  
Weed Management ◽  
Management Strategies ◽  
Palmer Amaranth ◽  
Production Costs ◽  
Integrated Weed Management ◽  
Amaranthus Palmeri ◽  
Cotton Production ◽  
Crimson Clover ◽  
Net Returns

Cotton (Gossypium hirsutumL.) producers in Alabama are faced with a rapidly expanding problem that decreases yields and increases production costs: herbicide-resistant weeds. Producers increasingly rely on integrated weed management strategies that raise production costs. This analysis evaluated how tillage, cover crops, and herbicide regime affected net returns above variable treatment costs (net returns) for cotton production in Alabama from 2009 to 2011 under pressure from Palmer amaranth (Amaranthus palmeriS. Wats.). Annual net returns were compared for two tillage treatments (inversion and noninversion tillage), three cover crops (crimson clover [Trifolium incarnatumL.], cereal rye [Secale cerealL.], and winter fallow), and three herbicide regimes (PRE, POST, and PRE+POST). Results indicate that under heavy Palmer amaranth population densities one year of inversion tillage followed by two years of noninversion tillage, along with a POST or PRE+POST herbicide application had the highest net returns in the first year; however, the economic benefit of inversion tillage, across all herbicide treatments, was nonexistent in 2010 and 2011. Cotton producers with Palmer amaranth infestations would likely benefit from cultural controls, in conjunction with herbicide applications, as part of their weed management system to increase net returns.

Horseweed (Conyza canadensis) Suppression from Cover Crop Mixtures and Fall-Applied Residual Herbicides

2019 ◽  
Vol 33 (2) ◽  
pp. 303-311 ◽  
Author(s):  
Kara B. Pittman ◽  
Jacob N. Barney ◽  
Michael L. Flessner
Keyword(s):  
Cover Crops ◽  
Weed Management ◽  
Cover Crop ◽  
Field Experiments ◽  
Late Spring ◽  
Integrated Weed Management ◽  
Management Approach ◽  
Late Winter ◽  
Cereal Rye ◽  
Crimson Clover

AbstractHorseweed is a problematic weed to control, especially in no-tillage production. Increasing cases of herbicide resistance have exacerbated the problem, necessitating alternative control options and an integrated weed management approach. Field experiments were conducted to evaluate horseweed suppression from fall-planted cover crop monocultures and mixtures as well as two fall-applied residual herbicide treatments. Prior to cover crop termination, horseweed density was reduced by 88% to 96% from cover crops. At cover crop termination in late spring, cereal rye biomass was 7,671 kg ha–1, which was similar to cereal rye–containing mixtures (7,720 kg ha–1) but greater than legumes in monoculture (3,335 kg ha–1). After cover crops were terminated in late spring using a roller crimper, corn and soybeans were planted and horseweed was evaluated using density counts, visible ratings, and biomass collection until harvest. Forage radish winterkilled, offering no competition in late winter or biomass to contribute to horseweed suppression after termination. Excluding forage radish in monoculture, no difference in horseweed suppression was detected between cereal rye–containing cover crops and legumes (crimson clover and hairy vetch) in monoculture. Likewise, horseweed suppression was similar between monocultures and mixtures, with the exception of one site-year in which mixtures provided better suppression. In this experiment, the cover crop treatments performed as well as or better than the fall-applied residual herbicides, flumioxazin+paraquat and metribuzin+chlorimuron-ethyl. These results indicate that fall-planted cover crops are a viable option to suppress horseweed and can be an effective part of an integrated weed management program. Furthermore, cover crop mixtures can be used to gain the benefits of legume or brassica cover crop species without sacrificing horseweed suppression.

Cover crop effects on horseweed (Erigeron canadensis) density and size inequality at the time of herbicide exposure

Weed Science ◽  
2019 ◽  
Vol 67 (3) ◽  
pp. 327-338 ◽  
Author(s):  
John M. Wallace ◽  
William S. Curran ◽  
David A. Mortensen
Keyword(s):  
Cover Crops ◽  
Cover Crop ◽  
Integrated Weed Management ◽  
Crop Response ◽  
Herbicide Resistant ◽  
No Till ◽  
Erigeron Canadensis ◽  
Size Inequality ◽  
Herbicide Exposure ◽  
Response Traits

AbstractProactive integrated weed management (IWM) is critically needed in no-till production to reduce the intensity of selection pressure for herbicide-resistant weeds. Reducing the density of emerged weed populations and the number of larger individuals within the population at the time of herbicide application are two practical management objectives when integrating cover crops as a complementary tactic in herbicide-based production systems. We examined the following demographic questions related to the effects of alternative cover-cropping tactics following small grain harvest on preplant, burndown management of horseweed (Erigeron canadensis L.) in no-till commodity-grain production: (1) Do cover crops differentially affect E. canadensis density and size inequality at the time of herbicide exposure? (2) Which cover crop response traits are drivers of E. canadensis suppression at time of herbicide exposure? Interannual variation in growing conditions (study year) and intra-annual variation in soil fertility (low vs. high nitrogen) were the primary drivers of cover crop response traits and significantly affected E. canadensis density at the time of herbicide exposure. In comparison to the fallow control, cover crop treatments reduced E. canadensis density 52% to 86% at the time of a preplant, burndown application. Cereal rye (Secale cereale L.) alone or in combination with forage radish (Raphanus sativus L.) provided the most consistent E. canadensis suppression. Fall and spring cover crop biomass production was negatively correlated with E. canadensis density at the preplant burndown application timing. Our results also show that winter-hardy cover crops reduce the size inequality of E. canadensis populations at the time of herbicide exposure by reducing the number of large individuals within the population. Finally, we advocate for advancement in our understanding of complementarity between cover crop– and herbicide-based management tactics in no-till systems to facilitate development of proactive, herbicide-resistant management strategies.

scholarly journals Carryover of Common Corn and Soybean Herbicides to Various Cover Crop Species

2017 ◽  
Vol 31 (1) ◽  
pp. 21-31 ◽  
Author(s):  
Cody D. Cornelius ◽  
Kevin W. Bradley
Keyword(s):  
Cover Crops ◽  
Cover Crop ◽  
Production Systems ◽  
Italian Ryegrass ◽  
Hairy Vetch ◽  
Crop Species ◽  
Cereal Rye ◽  
Crimson Clover ◽  
Crop Establishment ◽  
Biomass Reduction

The recent interest in cover crops as component of Midwest corn and soybean production systems has led to the need for additional research, including the effects of residual corn and soybean herbicide treatments on fall cover crop establishment. Field studies were conducted in 2013, 2014, and 2015 in Columbia, Missouri to investigate the effects of common residual herbicides applied in corn and soybean on establishment of winter wheat, tillage radish, cereal rye, crimson clover, winter oat, Austrian winter pea, Italian ryegrass, and hairy vetch. Cover crops were evaluated for stand and biomass reduction 28 d after emergence (DAE). Rainfall from herbicide application to cover crop seeding date was much greater in 2014 and 2015, which resulted in less carryover in these years compared to 2013. When averaged across all herbicides evaluated in these experiments, the general order of sensitivity of cover crops to herbicide carryover, from greatest to least was Austrian winter pea=crimson clover>oilseed radish>Italian ryegrass>hairy vetch>wheat >winter oat>cereal rye. Cereal rye had the fewest instances of biomass or stand reduction with only four out of the 27 herbicides adversely effecting establishment. Pyroxasulfone consistently reduced Italian ryegrass and winter oat biomass at least 67% in both the corn and soybean experiments. In the soybean experiment, imazethapyr- and fomesafen-containing products resulted in severe stand and biomass reduction in both years while flumetsulam-containing products resulted in the greatest carryover symptoms in the corn experiment. Results from these experiments suggest that several commonly used corn and soybean herbicides have the potential to hinder cover crop establishment, but the severity of damage will depend on weather, cover crop species, and the specific herbicide combination.

Herbicide selection to terminate grass, legume, and brassica cover crop species

2019 ◽  
Vol 34 (1) ◽  
pp. 48-54
Author(s):  
Kara B. Pittman ◽  
Charles W. Cahoon ◽  
Kevin W. Bamber ◽  
Lucas S. Rector ◽  
Michael L. Flessner
Keyword(s):  
Active Ingredient ◽  
Cover Crops ◽  
Cover Crop ◽  
Field Studies ◽  
Weed Suppression ◽  
Hairy Vetch ◽  
Crop Species ◽  
Rating Data ◽  
Crimson Clover ◽  
And Control

AbstractCover crops provide a number of agronomic benefits, including weed suppression, which is important as cases of herbicide resistance continue to rise. To effectively suppress weeds, high cover crop biomass is needed, which necessitates later termination timing. Cover crop termination is important to mitigate potential planting issues and prevent surviving cover crop competition with cash crops. Field studies were conducted in Virginia to determine the most effective herbicide options alone or combined with glyphosate or paraquat to terminate a range of cover crop species. Results revealed that grass cover crop species were controlled (94% to 98%) by glyphosate alone 4 wk after application (WAA). Overall, legume species varied in response to the single active-ingredient treatments, and control increased with the addition of glyphosate or paraquat. Mixes with glyphosate provided better control of crimson clover and hairy vetch by 7% to 8% compared with mixes containing paraquat 4 WAA. Mix partner did not influence control of Austrian winter pea. No treatment adequately controlled rapeseed in this study, with a maximum of 58% control observed with single active-ingredient treatments and 62% control with mixes. Height reduction for all cover crop species supports visible rating data. Rapeseed should be terminated when smaller, which could negate weed suppressive benefits from this cover crop species. Growers should consider herbicide selection and termination timing in their cover crop plan to ensure effective termination.

Herbicide Programs for the Termination of Various Cover Crop Species

2017 ◽  
Vol 31 (4) ◽  
pp. 514-522 ◽  
Author(s):  
Cody D. Cornelius ◽  
Kevin W. Bradley
Keyword(s):  
Cover Crops ◽  
Cover Crop ◽  
Field Experiments ◽  
Crop Yields ◽  
Production Systems ◽  
Annual Ryegrass ◽  
Crop Species ◽  
Cereal Rye ◽  
Crimson Clover ◽  
Herbicide Treatments

The recent interest in cover crops as a component of Midwest corn and soybean production systems has led to a greater need to understand the most effective herbicide treatments for cover crop termination prior to planting corn or soybean. Previous research has shown that certain cover crop species can significantly reduce subsequent cash crop yields if not completely terminated. Two field experiments were conducted in 2013, 2014, and 2015 to determine the most effective herbicide program for the termination of winter wheat, cereal rye, crimson clover, Austrian winter pea, annual ryegrass, and hairy vetch; and cover crops were terminated in early April or early May. Visual control and above ground biomass reduction was determined 28 d after application (DAA). Control of grass cover crop species was often best with glyphosate alone or combined with 2,4-D, dicamba, or saflufenacil. The most consistent control of broadleaf cover crops occurred following treatment with glyphosate +2,4-D, dicamba, or saflufenacil. In general, control of cover crops was higher with early April applications compared to early May. In a separate study, control of 15-, 25-, and 75-cm tall annual ryegrass was highest with glyphosate at 2.8 kg ha−1or glyphosate at 1.4 kg ha−1plus clethodim at 0.136 kgha−1. Paraquat- or glufosinate-containing treatments did not provide adequate annual ryegrass control. For practitioners who desire higher levels of cover crop biomass, these results indicate that adequate levels of cover crop control can still be achieved in the late spring with certain herbicide treatments. But it is important to consider cover crop termination well in advance to ensure the most effective herbicide or herbicide combinations are used and the products are applied at the appropriate stage.

Cover Crop and Postemergence Herbicide Integration for Palmer amaranth Control in Cotton

2017 ◽  
Vol 31 (3) ◽  
pp. 348-355 ◽  
Author(s):  
Matthew S. Wiggins ◽  
Robert M. Hayes ◽  
Robert L. Nichols ◽  
Lawrence E. Steckel
Keyword(s):  
Cover Crops ◽  
Weed Management ◽  
Cover Crop ◽  
Field Experiments ◽  
Palmer Amaranth ◽  
Cereal Rye ◽  
Crimson Clover ◽  
Annual Grasses ◽  
Winter Annual ◽  
Hand Weeding

Field experiments were conducted to evaluate the integration of cover crops and POST herbicides to control glyphosate-resistant Palmer amaranth in cotton. The winter-annual grasses accumulated the greatest amount of biomass and provided the most Palmer amaranth control. The estimates for the logistic regression would indicate that 1540 kg ha−1would delay Palmer amaranth emerging and growing to 10 cm by an estimated 16.5 days. The Palmer amaranth that emerged in the cereal rye and wheat cover crop treatments took a longer time to reach 10 cm compared to the hairy vetch and crimson clover treatments. POST herbicides were needed for adequate control of Palmer amaranth. The glufosinate-based weed control system provided greater control (75% vs 31%) of Palmer amaranth than did the glyphosate system. These results indicate that a POST only herbicide weed management system did not provide sufficient control of Palmer amaranth, even when used in conjunction with cover crops that produced a moderate level of biomass. Therefore, future recommendations for GR Palmer amaranth control will include integrating cover crops with PRE herbicides, overlaying residual herbicides in-season, timely POST herbicide applications, and hand weeding in order to achieve season-long control of this pest.

scholarly journals Allelopathic Impact of Cover Crop Species on Soybean and Goosegrass Seedling Germination and Early Growth

Agriculture ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 965
Author(s):  
Kendall Sheldon ◽  
Sam Purdom ◽  
Avat Shekoofa ◽  
Larry Steckel ◽  
Virginia Sykes
Keyword(s):  
Cover Crops ◽  
Root Length ◽  
Cover Crop ◽  
Deionized Water ◽  
Weed Suppression ◽  
Crop Species ◽  
Allelopathic Potential ◽  
Row Crops ◽  
Crimson Clover ◽  
Seedling Root

Cover crops can provide a variety of benefits to an agricultural system: weed suppression, soil quality improvement, and soil water infiltration. Although there is ample research documenting weed suppression from cover crops, the mechanics of the suppression are not implicitly understood. Along with the aforementioned positive attributes, negative allelopathic effects on row crops planted into cover crop systems have been documented. The objective of this study was to evaluate the allelopathic potential of certain cover crop species on soybean (Glycine max L.) and goosegrass (Eleusine indica L.) germination and early seedling growth under controlled environments in petri dish and pot experiments. Leachates from above-ground biomass of five cover crop species, wheat (Triticum aestivum L.), cereal rye (Secale cereale), hairy vetch (Vicia villosa), crimson clover (Trifolium incarnatum L.), and canola (Brassica napus L.), from two locations (East and Middle Tennessee) were extracted and applied at 0 (water) and 50 v/v. In experiment I, both soybean and goosegrass seeds were examined, and, in experiment II, only soybean seeds were examined under the application of cover crop leachates. Most cover crop leachates from both locations significantly reduced the soybean seedling root length (p < 0.01). Overall, the application of canola extract (East Tennessee) suppressed soybean seed germination the most (28%) compared to deionized water. For goosegrass, the wheat cover crop leachate significantly reduced seedling root length (p < 0.01). In experiment II, the soybean root nodulation was significantly increased with the wheat extract treatment compared to deionized water. While the results indicate that the location and environment may change cover crop species allelopathic potential, the wheat cover crop leachate had the most potent allelopathic impact on goosegrass germination and growth; however, had the lowest observed adverse effect on our tested row crop, soybean.

Herbicide and Cover Crop Residue Integration forAmaranthusControl in Conservation Agriculture Cotton and Implications for Resistance Management

2012 ◽  
Vol 26 (3) ◽  
pp. 490-498 ◽  
Author(s):  
Andrew J. Price ◽  
Kip S. Balkcom ◽  
Leah M. Duzy ◽  
Jessica A. Kelton
Keyword(s):  
Cover Crops ◽  
Weed Management ◽  
Cover Crop ◽  
Management Practices ◽  
Field Experiments ◽  
Conservation Tillage ◽  
Conservation Agriculture ◽  
Integrated Weed Management ◽  
Early Season ◽  
Density And Biomass

Conservation agriculture (CA) practices are threatened by glyphosate-resistant Palmer amaranth. Integrated control practices including PRE herbicides and high-residue CA systems can decreaseAmaranthusemergence. Field experiments were conducted from autumn 2006 through crop harvest in 2009 at two sites in Alabama to evaluate the effect of integrated weed management practices onAmaranthuspopulation density and biomass, cotton yield, and economics in glyphosate-resistant cotton. Horizontal strips included four CA systems with three cereal rye cover crop seeding dates and a winter fallow (WF) CA system compared to a conventional tillage (CT) system. Additionally, vertical strips of four herbicide regimes consisted of: broadcast, banded, or no PRE applications ofS-metolachlor (1.12 kg ai ha−1) followed by (fb) glyphosate (1.12 kg ae ha−1) applied POST fb layby applications of diuron (1.12 kg ai ha−1) plus MSMA (2.24 kg ai ha−1) or the LAYBY application alone. Early-seasonAmaranthusdensity was reduced in high-residue CA in comparison to the CA WF systems in 2 of 3 yr.Amaranthusdensities in herbicide treatments that included a broadcast PRE application were lower at three of five sampling dates compared to banding early-season PRE applications; however, the differences were not significant during the late season and cotton yields were not affected by PRE placement. High-residue conservation tillage yields were 577 to 899 kg ha−1more than CT, except at one site in 1 yr when CT treatment yields were higher. CA utilizing high-residue cover crops increased net returns over CT by $100 ha−1or more 2 out of 3 yr at both locations. High-residue cover crop integration into a CA system reducedAmaranthusdensity and increased yield over WF systems; the inclusion of a broadcast PRE application can increase early-seasonAmaranthuscontrol and might provide additional control when glyphosate-resistantAmaranthuspopulations are present.

Organic zero-till in the northern US Great Plains Region: Opportunities and obstacles

2011 ◽  
Vol 27 (1) ◽  
pp. 12-20 ◽  
Author(s):  
Patrick M. Carr ◽  
Randy L. Anderson ◽  
Yvonne E. Lawley ◽  
Perry R. Miller ◽  
Steve F. Zwinger
Keyword(s):  
Crop Rotation ◽  
Great Plains ◽  
Cover Crops ◽  
Cover Crop ◽  
Growing Season ◽  
Northern Great Plains ◽  
Crop Species ◽  
Cash Crops ◽  
No Till ◽  
The Us

AbstractThe use of killed cover crop mulch for weed suppression, soil erosion prevention and many other soil and crop benefits has been demonstrated in organic no-till or zero-till farming systems in eastern US regions and in Canada. Implements have been developed to make this system possible by terminating cover crops mechanically with little, if any, soil disturbance. Ongoing research in the US northern Great Plains is being conducted to identify cover crop species and termination methods for use in organic zero-till (OZ) systems that are adapted to the crop rotations and climate of this semi-arid region. Current termination strategies must be improved so that cover crop species are killed consistently and early enough in the growing season so that subsequent cash crops can be grown and harvested successfully. Delaying termination until advanced growth stages improves killing efficacy of cover crops and may provide weed-suppressive mulch for the remainder of the growing season, allowing no-till spring seeding of cash crops during the next growing season. Excessive water use by cover crops, inability of legume cover crops to supply adequate amounts of N for subsequent cash crops and failure of cover crops to suppress perennial weeds are additional obstacles that must be overcome before the use of killed cover crop mulch can be promoted as a weed control alternative to tillage in the US northern Great Plains. Use of vegetative mulch produced by killed cover crops will not be a panacea for the weed control challenges faced by organic growers, but rather one tool along with crop rotation, novel grazing strategies, the judicious use of high-residue cultivation equipment, such as the blade plow, and the use of approved herbicides with systemic activity in some instances, to provide organic farmers with new opportunities to incorporate OZ practices into their cropping systems. Emerging crop rotation designs for organic no-till systems may provide for more efficient use of nutrient and water resources, opportunities for livestock grazing before, during or after cash crop phases and improved integrated weed management strategies on organic farms.

Sign in / Sign up

Export Citation Format

Share Document