Phenolic Polymer-Based Color Developers for Thermal Papers: Synthesis, Characterization, and Applications

Author(s):  
Jihyeon Yun ◽  
Hyun-Sik Kang ◽  
Byeong-Kwan An
Keyword(s):  
2015 ◽  
Vol 137 (1) ◽  
Author(s):  
Xinrui Zhang ◽  
Xianqiang Pei ◽  
Qihua Wang ◽  
Tingmei Wang

Carbon fabric/phenolic composites modified with potassium titanate whisker (PTW) were prepared by a dip-coating and hot-press molding technique, and the tribological properties of the resulting composites were investigated systematically using a ring-on-block arrangement under different sliding conditions. Experimental results showed that the optimal PTW significantly decreased the wear-rate. The worn surfaces of the composites and the transfer film formed on the counterpart steel ring were examined by scanning electron microscopy (SEM) to reveal the wear mechanisms. The transfer films formed on the counterpart surfaces made contributions to the improvement of the tribological behavior of the carbon fabric composites. The friction and wear of the filled carbon fabric composites was significantly dependent on the sliding conditions. It is observed that the wear-rate increased with increasing applied load and sliding speeds.


2019 ◽  
Vol 69 (1) ◽  
pp. 31-40 ◽  
Author(s):  
Mohammed Monier ◽  
Ibrahim Youssef ◽  
Ahmed El‐Mekabaty

Glassy carbon has been prepared in the shape of disk and fibre by direct pyrolysis of a phenolic resin. Carbonization studies indicate that the unique structure of the final glassy carbon is a direct consequence of the production of very stable aromatic ribbon molecules by the coalescence of phenolic polymer chains at an early stage of pyrolysis. It is shown that molecular orientation induced in the initial polymer before pyrolysis is 'memorized’ to some extent after carbonization. Molecular orientation imposed in this type of carbon is not an intrinsic structural feature, but a physical characteristic which can be varied by the formation process or by extension at high temperatures; there is no essential structural difference apart from preferred orientation between polymeric units or microfibrils in well-oriented carbon fibres and isotropic glassy carbon. High resolution electron microscopy confirms this directly. We thus identify a new class of ‘polymeric carbons’, that consist of intertwined microfibrils comprising stacks of narrow graphitic ribbons. The fibrils are held together with covalent interfibrillar links of strength lower than that in the ribbons themselves. A ribbon structure has been proposed previously by Ruland (1971) for the specific case of high modulus carbon fibre. The structure is elaborated and extended here to cover all polymeric carbons and the steps in its development during carbonization are decisively detailed.


2017 ◽  
Vol 114 (18) ◽  
pp. 4709-4714 ◽  
Author(s):  
Hongjie Li ◽  
Daniel J. Yelle ◽  
Chang Li ◽  
Mengyi Yang ◽  
Jing Ke ◽  
...  

Depolymerizing lignin, the complex phenolic polymer fortifying plant cell walls, is an essential but challenging starting point for the lignocellulosics industries. The variety of ether– and carbon–carbon interunit linkages produced via radical coupling during lignification limit chemical and biological depolymerization efficiency. In an ancient fungus-cultivating termite system, we reveal unprecedentedly rapid lignin depolymerization and degradation by combining laboratory feeding experiments, lignocellulosic compositional measurements, electron microscopy, 2D-NMR, and thermochemolysis. In a gut transit time of under 3.5 h, in young worker termites, poplar lignin sidechains are extensively cleaved and the polymer is significantly depleted, leaving a residue almost completely devoid of various condensed units that are traditionally recognized to be the most recalcitrant. Subsequently, the fungus-comb microbiome preferentially uses xylose and cleaves polysaccharides, thus facilitating final utilization of easily digestible oligosaccharides by old worker termites. This complementary symbiotic pretreatment process in the fungus-growing termite symbiosis reveals a previously unappreciated natural system for efficient lignocellulose degradation.


Author(s):  
Banchamlak Bemerw ◽  
Magdi Gibril ◽  
Shoujuan Wang ◽  
Fangong Kong
Keyword(s):  

Antioxidants ◽  
2020 ◽  
Vol 9 (4) ◽  
pp. 270 ◽  
Author(s):  
Davide Liberti ◽  
Maria Laura Alfieri ◽  
Daria Maria Monti ◽  
Lucia Panzella ◽  
Alessandra Napolitano

Eumelanins, the dark variant of skin pigments, are endowed with a remarkable antioxidant activity and well-recognized photoprotective properties that have been ascribed to pigment components derived from the biosynthetic precursor 5,6-dihydroxyindole-2-carboxylic acid (DHICA). Herein, we report the protective effect of a polymer obtained starting from the methyl ester of DHICA (MeDHICA-melanin) against Ultraviolet A (UVA)-induced oxidative stress in immortalized human keratinocytes (HaCaT). MeDHICA-melanin was prepared by aerial oxidation of MeDHICA. At concentrations as low as 10 µg/mL, MeDHICA-melanin prevented reactive oxygen species accumulation and partially reduced glutathione oxidation in UVA-irradiated keratinocytes. Western blot experiments revealed that the polymer is able to induce the translocation of nuclear factor erythroid 2–related factor 2 (Nrf-2) to the nucleus with the activation of the transcription of antioxidant enzymes, such as heme-oxygenase 1. Spectrophotometric and HPLC analysis of cell lysate allowed to conclude that a significant fraction (ca. 7%), consisting mainly of the 4,4′-dimer of MeDHICA (ca. 2 μM), was internalized in the cells. Overall these data point to the potential use of MeDHICA-melanin as an antioxidant for the treatment of skin damage, photoaging and skin cancers.


2004 ◽  
Vol 5 (6) ◽  
pp. 2376-2383 ◽  
Author(s):  
Mattias Berglin ◽  
Ludovic Delage ◽  
Philippe Potin ◽  
Hans Vilter ◽  
Hans Elwing

2016 ◽  
Vol 55 (47) ◽  
pp. 14623-14627 ◽  
Author(s):  
Zhi-Long Yu ◽  
Guan-Cheng Li ◽  
Nina Fechler ◽  
Ning Yang ◽  
Zhi-Yuan Ma ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document