A-Site Substitute for Fabricating All-Inorganic Perovskite CsPbCl3 with Application in Self-Powered Ultraviolet Photodetectors

Author(s):  
Dongjie Ren ◽  
Hai Zhou ◽  
Ruiping Chen ◽  
Dingjun Wu ◽  
Haizong Pan ◽  
...  
2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Ting Zhang ◽  
Shibin Li

AbstractIn this manuscript, the inorganic perovskite CsPbI2Br and CsPbIBr2 are investigated as photoactive materials that offer higher stability than the organometal trihalide perovskite materials. The fabrication methods allow anti-solvent processing the CsPbIxBr3−x films, overcoming the poor film quality that always occur in a single-step solution process. The introduced diethyl ether in spin-coating process is demonstrated to be successful, and the effects of the anti-solvent on film quality are studied. The devices fabricated using the methods achieve high-performance, self-powered and the stabilized photodetectors show fast response speed. The results illustrate a great potential of all-inorganic CsPbIxBr3−x perovskites in visible photodetection and provide an effective way to achieve high performance devices with self-powered capability.


Author(s):  
Lijuan Huang ◽  
Zhengrui Hu ◽  
Hong Zhang ◽  
Yuanqiang Xiong ◽  
Shiqiang Fan ◽  
...  

Gallium oxide (Ga2O3) has been extensively studied in recent years because it is a natural candidate material for next-generation solar-blind deep ultraviolet photodetectors (PDs). Herein, a three dimensional (3D) amorphous...


Nanoscale ◽  
2017 ◽  
Vol 9 (13) ◽  
pp. 4536-4543 ◽  
Author(s):  
Buddha Deka Boruah ◽  
Shanmukh Naidu Majji ◽  
Abha Misra

2018 ◽  
Vol 76 ◽  
pp. 61-64 ◽  
Author(s):  
Liuan Li ◽  
Zhangcheng Liu ◽  
Lei Wang ◽  
Baijun zhang ◽  
Yang Liu ◽  
...  

2018 ◽  
Vol 9 (16) ◽  
pp. 4714-4719 ◽  
Author(s):  
Hai Zhou ◽  
Zhaoning Song ◽  
Corey R. Grice ◽  
Cong Chen ◽  
Xiaohan Yang ◽  
...  

2020 ◽  
Vol 7 (1) ◽  
pp. 015063 ◽  
Author(s):  
Qiu-Ming Fu ◽  
Zhi-Chao Yao ◽  
Ji-Liang Peng ◽  
Hong-Yang Zhao ◽  
Zhi-Bin Ma ◽  
...  

2020 ◽  
Vol 12 (8) ◽  
pp. 9755-9765 ◽  
Author(s):  
Meng-Shian Tsai ◽  
Tien-Lin Shen ◽  
Hsing-Mei Wu ◽  
Yu-Ming Liao ◽  
Yu-Kuang Liao ◽  
...  

2020 ◽  
Author(s):  
Ting Zhang ◽  
Shibin Li

Abstract In this manuscript, the inorganic perovskite CsPbI2Br and CsPbIBr2 are investigated as photoactive materials that offers higher stability than the organometal trihalide perovskite materials. The fabrication methods allow anti-solvent processing the CsPbIxBr3−x films, overcoming the poor film quality that always occur in a single-step solution process. The introduced diethyl ether in spin-coating process is demonstrated to be successful, and the effects of the anti-solvent on film quality are studied. The devices fabricated using the methods achieve a high-performance, self-powered and stabilized photodetectors with fast response speed. The results illustrate a great potential of all-inorganic CsPbIxBr3−x perovskites in visible photodetection and provide an effective way to achieve high performance devices with self-powered capability.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Lalit Goswami ◽  
Neha Aggarwal ◽  
Pargam Vashishtha ◽  
Shubhendra Kumar Jain ◽  
Shruti Nirantar ◽  
...  

AbstractThe fabrication of unique taper-ended GaN-Nanotowers structure based highly efficient ultraviolet photodetector is demonstrated. Hexagonally stacked, single crystalline GaN nanocolumnar structure (nanotowers) grown on AlN buffer layer exhibits higher photocurrent generation due to high quality nanotowers morphology and increased surface/volume ratio which significantly enhances its responsivity upon ultraviolet exposure leading to outstanding performance from the developed detection device. The fabricated detector display low dark current (~ 12 nA), high ILight/IDark ratio (> 104), fast time-correlated transient response (~ 433 µs) upon ultraviolet (325 nm) illumination. A high photoresponsivity of 2.47 A/W is achieved in self-powered mode of operation. The reason behind such high performance could be attributed to built-in electric field developed from a difference in Schottky barrier heights will be discussed in detail. While in photoconductive mode, the responsivity is observed to be 35.4 A/W @ − 3 V along with very high external quantum efficiency (~ 104%), lower noise equivalent power (~ 10–13 WHz−1/2) and excellent UV–Vis selectivity. Nanotower structure with lower strain and dislocations as well as reduced trap states cumulatively contributed to augmented performance from the device. The utilization of these GaN-Nanotower structures can potentially be useful towards the fabrication of energy-efficient ultraviolet photodetectors.


Sign in / Sign up

Export Citation Format

Share Document