Green Chemical Approach to Fabricate Hemp Fiber Composites for Making Sustainable Hydroponic Growth Media

2021 ◽  
Author(s):  
Avinash Kumar Both ◽  
Mark Alan Helle ◽  
Guru Madireddy ◽  
Chin Li Cheung
Keyword(s):  
Fiber Composites ◽  
Growth Media ◽  
Hemp Fiber ◽  
Chemical Approach ◽  
Hydroponic Growth

Development of hemp fiber composites with recycled high density polyethylene grocery bags

2021 ◽  
Author(s):  
Carlos Angulo ◽  
Siddhartha Brahma ◽  
Alejandra Espinosa‐Dzib ◽  
Robert Peters ◽  
Katherine M. E. Stewart ◽  
...  
Keyword(s):  
High Density Polyethylene ◽  
Fiber Composites ◽  
High Density ◽  
Hemp Fiber

Rheological properties of polypropylene/hemp fiber composites

2009 ◽  
Vol 30 (10) ◽  
pp. 1401-1407 ◽  
Author(s):  
Eddy Twite-Kabamba ◽  
Ahmed Mechraoui ◽  
Denis Rodrigue
Keyword(s):  
Rheological Properties ◽  
Fiber Composites ◽  
Hemp Fiber

Comparative Analysis of the Tensile Properties of Polyester and Epoxy Composites Reinforced with Hemp Fibers

2018 ◽  
Vol 930 ◽  
pp. 201-206
Author(s):  
Lazaro Araújo Rohen ◽  
Anna Carolina Cerqueira Neves ◽  
Jheison Lopes dos Santos ◽  
Lucio Fabio Cassiano Nascimento ◽  
Sergio Neves Monteiro ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Elastic Modulus ◽  
Tensile Properties ◽  
Epoxy Matrix ◽  
Fiber Composites ◽  
Epoxy Composites ◽  
Matrix Composites ◽  
Hemp Fiber ◽  
Hemp Fibers ◽  
Polyester Matrix

The present work compares the tensile properties of polyester and epoxy matrix composites reinforced with hemp fibers. Polyester and epoxy reinforced with different volume fractions of hemp fibers up to 30% were prepared according to ASTM D-638-14 and tensile tested. The epoxy matrix composites reinforced with 30% of fibers presented tensile strength of 53 MPa, while those of polyester matrix, 25 MPa. The elastic modulus of the epoxy matrix composites was 1.75 GPa and that of the polyester matrix 4.05 GPa. The tests showed that the resistance of the epoxy composites reinforced with hemp fiber is superior to those of polyester matrix. However, the stiffness of the polyester/hemp fiber composites is higher than the epoxy/hemp fiber ones.

Mechanical Properties of Poly (Lactic Acid)/Hemp Fiber Composites Prepared with a Novel Method

2013 ◽  
Vol 21 (4) ◽  
pp. 1117-1127 ◽  
Author(s):  
Yanan Song ◽  
Jun Liu ◽  
Shaozhuang Chen ◽  
Yubin Zheng ◽  
Shilun Ruan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Fiber Composites ◽  
Poly Lactic Acid ◽  
Hemp Fiber ◽  
Novel Method

Mechanical Properties of Hemp Fiber Composites with Carbon Nanotubes Reinforcement

2008 ◽  
Vol 55-57 ◽  
pp. 553-555
Author(s):  
Haruthai Longkullabutra ◽  
Wim Nhuapeng ◽  
Wandee Thamjaree ◽  
Tawee Tunkasiri
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Tensile Strength ◽  
Epoxy Resin ◽  
Fiber Composites ◽  
Resin Composites ◽  
Hemp Fiber ◽  
Epoxy Resin Composites ◽  
Composite Samples

An experimental was investigated the condition of reinforcement of hemp fiber and hemp fiber/epoxy resin composites with carbon nanotubes (CNTs).The CNTs were mixed with several liquid such as ethanol, latex, water glue and epoxy resin. These mixtures were added to hemp fiber and prepared the hemp fiber/epoxy resin composites. The mechanical properties of both fiber and composite samples were measured. It was found that the mixture of epoxy resin and CNTs with CNTs ratio of 20 vol% in hemp fiber showed the highest tensile strength of 25.43 N. and the same mixture in hemp fiber/epoxy resin composites showed the highest tensile strength of 31.82 MPa and elongation of 7.40 %.

Sign in / Sign up

Export Citation Format

Share Document