scholarly journals Construction of Nanocrystalline Cellulose-Based Composite Fiber Films with Excellent Porosity Performances via an Electrospinning Strategy

ACS Omega ◽  
2021 ◽  
Vol 6 (7) ◽  
pp. 4958-4967 ◽  
Author(s):  
Lei Ge ◽  
Juanjuan Yin ◽  
Dawei Yan ◽  
Wei Hong ◽  
Tifeng Jiao
Keyword(s):  
Composite Fiber ◽  
Nanocrystalline Cellulose

Diode-Pumped Thulium (Tm)/Holmium (Ho) Composite Fiber 2.1-Micrometers Laser

2015 ◽  
Author(s):  
G. A. Newburgh ◽  
Krysta Boccuzzi
Keyword(s):  
Composite Fiber ◽  
Diode Pumped

Nanocrystalline Cellulose as Reinforcement for Polymeric Matrix Nanocomposites and its Potential Applications: A Review

2018 ◽  
Vol 14 (3) ◽  
pp. 203-225 ◽  
Author(s):  
R. A. Ilyas ◽  
S. M. Sapuan ◽  
M. L. Sanyang ◽  
M. R. Ishak ◽  
E. S. Zainudin
Keyword(s):  
Nanocrystalline Cellulose ◽  
Polymeric Matrix ◽  
Potential Applications ◽  
Matrix Nanocomposites

Extraction, Purification and Characterization of Nanocrystalline Cellulose from Eichhornia crassipes (Mart.) Solms: A Common Aquatic Weed Water Hyacinth

2021 ◽  
pp. 1-12
Author(s):  
Kannan Kilavan Packiam ◽  
Bharani Murugesan ◽  
Pavithra Mettupalayam Kaliyannan Sundaramoorthy ◽  
Harshini Srinivasan ◽  
Keerthika Dhanasekaran
Keyword(s):  
Water Hyacinth ◽  
Eichhornia Crassipes ◽  
Nanocrystalline Cellulose ◽  
Aquatic Weed ◽  
Purification And Characterization

scholarly journals Preparation, Characterization, and Evaluation of Macrocrystalline and Nanocrystalline Cellulose as Potential Corrosion Inhibitors for SS316 Alloy during Acid Pickling Process: Experimental and Computational Methods

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2275
Author(s):  
Arafat Toghan ◽  
Mohamed Gouda ◽  
Kamal Shalabi ◽  
Hany M. Abd El-Lateef
Keyword(s):  
Surface Area ◽  
Density Functional ◽  
Protective Efficacy ◽  
Protective Layer ◽  
Nanocrystalline Cellulose ◽  
Bet Surface Area ◽  
Natural Polymers ◽  
Active Centers ◽  
Acid Pickling ◽  
Pickling Process

Converting low-cost bio-plant residuals into high-value reusable nanomaterials such as microcrystalline cellulose is an important technological and environmental challenge. In this report, nanocrystalline cellulose (NCC) was prepared by acid hydrolysis of macrocrystalline cellulose (CEL). The newly synthesized nanomaterials were fully characterized using spectroscopic and microscopic techniques including FE-SEM, FT-IR, TEM, Raman spectroscopy, and BET surface area. Morphological portrayal showed the rod-shaped structure for NCC with an average diameter of 10–25 nm in thickness as well as length 100–200 nm. The BET surface area of pure CEL and NCC was found to be 10.41 and 27 m2/g, respectively. The comparative protection capacity of natural polymers CEL and NCC towards improving the SS316 alloy corrosion resistance has been assessed during the acid pickling process by electrochemical (OCP, PDP, and EIS), and weight loss (WL) measurements. The outcomes attained from the various empirical methods were matched and exhibited that the protective efficacy of these polymers augmented with the upsurge in dose in this order CEL (93.1%) < NCC (96.3%). The examined polymers display mixed-corrosion inhibition type features by hindering the active centers on the metal interface, and their adsorption followed the Langmuir isotherm model. Surface morphology analyses by SEM reinforced the adsorption of polymers on the metal substrate. The Density Functional Theory (DFT) parameters were intended and exhibited the anti-corrosive characteristics of CEL and NCC polymers. A Monte Carlo (MC) simulation study revealed that CEL and NCC polymers are resolutely adsorbed on the SS316 alloy surface and forming a powerful adsorbed protective layer.

Graphene/chitosan/Ag+- doped hydroxyapatite triple composite fiber coatings on new generation hybrid titanium composite by electrospinning

2021 ◽  
pp. 002199832110075
Author(s):  
Tuğba Mutuk ◽  
Mevlüt Gürbüz
Keyword(s):  
Hybrid Composites ◽  
Graphene Nanosheets ◽  
Pure Titanium ◽  
Composite Fiber ◽  
Mass Change ◽  
Coated Materials ◽  
Nano Fiber ◽  
Hybrid Nanofiber ◽  
New Generation ◽  
Fiber Coatings

In this work, The hybrid hydroxyapatite (HaP), chitosan (CH) and graphene nanosheets (GNS) mixtures were applied by electrospinning on the surface of GNS and Si3N4 (SN) binary powder reinforced hybrid titanium (Ti) metal composites surface to improve composite biosurface functionallity. The surfaces of coated materials were characterized and antibacterial tests were carried on for their suitability in the industry by performing artificial body fluid tests. The hybrid nano fiber coatings formed a homogeneous structure on the composite. According to bioactivity tests and microstructure analysis, it was seen that HaP, which has the best results in the change of pH (pH= 11.80) values. The lowest mass change (0.0005 g) was observed on the 10th day of pure titanium. The highest mass change (0.0210 g) was obtained as on the HaP coated hybrid titanium composite. According to the antibacterial test result the hybrid nanofiber containing silver (Ag+) doped HaP on Ti composites showed the best antibacterial property aganist the E.coli. The fabricated electrospin coated hybrid composites can be a potantial candidate for dental, orthopedic implant applications and tissue engineering.

Degradable ultrathin high-performance photocatalytic hydrogen generator from porous electrospun composite fiber membrane with enhanced light absorption ability

2021 ◽  
Author(s):  
Qian-Yu Wang ◽  
Zheng-Min Zhang ◽  
Lin Liu ◽  
Lu Bai ◽  
Rui-Ying Bao ◽  
...  
Keyword(s):  
Phase Separation ◽  
Light Absorption ◽  
High Performance ◽  
Composite Fiber ◽  
Channel Structure ◽  
Separation Mechanism ◽  
Hydrogen Generator ◽  
Fiber Membrane ◽  
Breath Figure ◽  
Phase Separation Mechanism

Poly(L-lactide) (PLA)/TiO2/Pt composite fiber membrane with internal porous channel structure is fabricated by skillfully tuning the breath figure mechanism and vapor induced phase separation mechanism with solute and solvent matching...

Sign in / Sign up

Export Citation Format

Share Document