scholarly journals Sol–Gel Synthesis of Ce4–xSr1+xFe5–xZnxO14+δ[0 ≤x≤ 0.45] Superparamagnetic Oxide Systems and Its Magnetic, Dielectric, and Drug Delivery Properties

ACS Omega ◽  
2018 ◽  
Vol 3 (12) ◽  
pp. 16509-16518
Author(s):  
Venkatesan Thangaraj ◽  
Murugesan Yogapriya ◽  
Kuppulingam Thirumalai ◽  
Meenakshisundaram Swaminathan ◽  
Anandhakumar Sundaramurthy ◽  
...  
2010 ◽  
Vol 46 (2) ◽  
pp. 228-230 ◽  
Author(s):  
Lydie Viau ◽  
Corine Tourné-Péteilh ◽  
Jean-Marie Devoisselle ◽  
André Vioux

Ceramics ◽  
2021 ◽  
Vol 4 (2) ◽  
pp. 278-290
Author(s):  
Piotr Marciniak ◽  
Bogna Sztorch ◽  
Agnieszka Martyła ◽  
Agnieszka Czapik ◽  
Mikołaj Stodolny ◽  
...  

A series of binary oxide systems with Ca/Si molar ratios of 0.05, 0.1, 0.25, 0.5 and 1.0 have been synthesized by the sol-gel technique from tetraethyl orthosilicate (TEOS) and metallic calcium powder. Upon calcination, a side effect of wollastonite formation as a result of the reaction between the components of the material has been observed in the two calcium-richest systems. The increase in calcium content produces an effect of porosity promotion. At high calcium contents, the homogeneity of the systems is limited by the ability of silica to disperse the calcium component. The properties of these systems are determined by the silica surface coverage with a large amount of the scattered CaCO3 fine microcrystallites (calcite), resulting from the phase segregation. The gels were characterized by X-ray powder diffraction, low temperature nitrogen adsorption, transmission and scanning electron microscopy (TEM, SEM and SEM/EDS), thermogravimetric analysis (TGA), and FT-IR spectra, to describe the parameters important from the point of view of their application as a support for metal-based catalysts.


1998 ◽  
Vol 8 (3) ◽  
pp. 102-104 ◽  
Author(s):  
Elena A. Trusova ◽  
Mark V. Tsodikov ◽  
Evgenii V. Slivinskii ◽  
Gustavo G. Hernandez ◽  
Olga V. Bukhtenko ◽  
...  

2003 ◽  
Vol 780 ◽  
Author(s):  
R. Houbertz ◽  
J. Schulz ◽  
L. Fröhlich ◽  
G. Domann ◽  
M. Popall ◽  
...  

AbstractReal 3-D sub-νm lithography was performed with two-photon polymerization (2PP) using inorganic-organic hybrid polymer (ORMOCER®) resins. The hybrid polymers were synthesized by hydrolysis/polycondensation reactions (modified sol-gel synthesis) which allows one to tailor their material properties towards the respective applications, i.e., dielectrics, optics or passivation. Due to their photosensitive organic functionalities, ORMOCER®s can be patterned by conventional photo-lithography as well as by femtosecond laser pulses at 780 nm. This results in polymerized (solid) structures where the non-polymerized parts can be removed by conventional developers.ORMOCER® structures as small as 200 nm or even below were generated by 2PP of the resins using femtosecond laser pulses. It is demonstrated that ORMOCER®s have the potential to be used in components or devices built up by nm-scale structures such as, e.g., photonic crystals. Aspects of the materials in conjunction to the applied technology are discussed.


2019 ◽  
Vol 11 (3) ◽  
pp. 03021-1-03021-5
Author(s):  
V. S. Bushkova ◽  
◽  
I. P. Yaremiy ◽  
B. K. Ostafiychuk ◽  
N. I. Riznychuk ◽  
...  

Author(s):  
L.M. Anovitz ◽  
A. Affolter ◽  
M.C. Cheshire ◽  
A.J. Rondinone ◽  
Lawrence F. Allard
Keyword(s):  
Sol Gel ◽  

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1554
Author(s):  
Justinas Januskevicius ◽  
Zivile Stankeviciute ◽  
Dalis Baltrunas ◽  
Kęstutis Mažeika ◽  
Aldona Beganskiene ◽  
...  

In this study, an aqueous sol-gel synthesis method and subsequent dip-coating technique were applied for the preparation of yttrium iron garnet (YIG), yttrium iron perovskite (YIP), and terbium iron perovskite (TIP) bulk and thin films. The monophasic highly crystalline different iron ferrite powders have been synthesized using this simple aqueous sol-gel process displaying the suitability of the method. In the next step, the same sol-gel solution was used for the fabrication of coatings on monocrystalline silicon (100) using a dip-coating procedure. This resulted, likely due to substrate surface influence, in all coatings having mixed phases of both garnet and perovskite. Thermogravimetric (TG) analysis of the precursor gels was carried out. All the samples were investigated by X-ray powder diffraction (XRD) analysis. The coatings were also investigated by scanning electron microscopy (SEM), atomic force microscopy (AFM) and Mössbauer spectroscopy. Magnetic measurements were also carried out.


Sign in / Sign up

Export Citation Format

Share Document