scholarly journals The Self-Assembly of a Cyclometalated Palladium Photosensitizer into Protein-Stabilized Nanorods Triggers Drug Uptake In Vitro and In Vivo

2020 ◽  
Vol 142 (23) ◽  
pp. 10383-10399
Author(s):  
Xue-Quan Zhou ◽  
Ming Xiao ◽  
Vadde Ramu ◽  
Jonathan Hilgendorf ◽  
Xuezhao Li ◽  
...  
Keyword(s):  
Self Assembly ◽  
The Self ◽  
Drug Uptake

scholarly journals Human Organ-Specific 3D Cancer Models Produced by the Stromal Self-Assembly Method of Tissue Engineering for the Study of Solid Tumors

2020 ◽  
Vol 2020 ◽  
pp. 1-23 ◽  
Author(s):  
Vincent Roy ◽  
Brice Magne ◽  
Maude Vaillancourt-Audet ◽  
Mathieu Blais ◽  
Stéphane Chabaud ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Tumor Microenvironment ◽  
Self Assembly ◽  
The Self ◽  
Human Organ ◽  
Assembly Method ◽  
Cancer Models ◽  
Organ Specific

Cancer research has considerably progressed with the improvement of in vitro study models, helping to understand the key role of the tumor microenvironment in cancer development and progression. Over the last few years, complex 3D human cell culture systems have gained much popularity over in vivo models, as they accurately mimic the tumor microenvironment and allow high-throughput drug screening. Of particular interest, in vitrohuman 3D tissue constructs, produced by the self-assembly method of tissue engineering, have been successfully used to model the tumor microenvironment and now represent a very promising approach to further develop diverse cancer models. In this review, we describe the importance of the tumor microenvironment and present the existing in vitro cancer models generated through the self-assembly method of tissue engineering. Lastly, we highlight the relevance of this approach to mimic various and complex tumors, including basal cell carcinoma, cutaneous neurofibroma, skin melanoma, bladder cancer, and uveal melanoma.

The Origin of the Eukaryotic Cell Based on Conservation of Existing Interfaces

2006 ◽  
Vol 12 (4) ◽  
pp. 513-523 ◽  
Author(s):  
Albert D. G. de Roos
Keyword(s):  
Plasma Membrane ◽  
Protein Interactions ◽  
Self Assembly ◽  
Evolutionary Model ◽  
Lipid Vesicles ◽  
Eukaryotic Cell ◽  
The Self ◽  
Lipid Protein Interactions

Current theories about the origin of the eukaryotic cell all assume that during evolution a prokaryotic cell acquired a nucleus. Here, it is shown that a scenario in which the nucleus acquired a plasma membrane is inherently less complex because existing interfaces remain intact during evolution. Using this scenario, the evolution to the first eukaryotic cell can be modeled in three steps, based on the self-assembly of cellular membranes by lipid-protein interactions. First, the inclusion of chromosomes in a nuclear membrane is mediated by interactions between laminar proteins and lipid vesicles. Second, the formation of a primitive endoplasmic reticulum, or exomembrane, is induced by the expression of intrinsic membrane proteins. Third, a plasma membrane is formed by fusion of exomembrane vesicles on the cytoskeletal protein scaffold. All three self-assembly processes occur both in vivo and in vitro. This new model provides a gradual Darwinistic evolutionary model of the origins of the eukaryotic cell and suggests an inherent ability of an ancestral, primitive genome to induce its own inclusion in a membrane.

scholarly journals Yeast proteins associated with microtubules in vitro and in vivo.

1992 ◽  
Vol 3 (1) ◽  
pp. 29-47 ◽  
Author(s):  
G Barnes ◽  
K A Louie ◽  
D Botstein
Keyword(s):  
Self Assembly ◽  
Synthetic Peptides ◽  
Immunofluorescence Microscopy ◽  
The Self ◽  
Microtubule Associated Proteins ◽  
Amino Terminal ◽  
Novel Proteins ◽  
Associated Proteins

Conditions were established for the self-assembly of milligram amounts of purified Saccharomyces cerevisiae tubulin. Microtubules assembled with pure yeast tubulin were not stabilized by taxol; hybrid microtubules containing substoichiometric amounts of bovine tubulin were stabilized. Yeast microtubule-associated proteins (MAPs) were identified on affinity matrices made from hybrid and all-bovine microtubules. About 25 yeast MAPs were isolated. The amino-terminal sequences of several of these were determined: three were known metabolic enzymes, two were GTP-binding proteins (including the product of the SAR1 gene), and three were novel proteins not found in sequence databases. Affinity-purified antisera were generated against synthetic peptides corresponding to two of the apparently novel proteins (38 and 50 kDa). Immunofluorescence microscopy showed that both these proteins colocalize with intra- and extranuclear microtubules in vivo.

Acidity-responsive shell-sheddable camptothecin-based nanofibers for carrier-free cancer drug delivery

Nanoscale ◽  
2019 ◽  
Vol 11 (34) ◽  
pp. 15907-15916 ◽  
Author(s):  
Zhuha Zhou ◽  
Ying Piao ◽  
Lingqiao Hao ◽  
Guanyu Wang ◽  
Zhuxian Zhou ◽  
...  
Keyword(s):  
Self Assembly ◽  
Surface Coating ◽  
Tumor Tissue ◽  
The Self ◽  
Cancer Drug ◽  
Ph Responsive ◽  
Carrier Free ◽  
Cancer Drug Delivery

pH-responsive nanofibers are obtained by the self-assembly of the camptothecin prodrug and surface-coating, which can efficiently enter cancer cells in vitro and penetrate deep into tumor tissue in vivo.

scholarly journals Synergistic inhibition of metastatic breast cancer by dual-chemotherapy with excipient-free rhein/DOX nanodispersions

2020 ◽  
Author(s):  
Ruoning Wang ◽  
Yujie Yang ◽  
Mengmeng Yang ◽  
Dandan Yuan ◽  
Jinyu Huang ◽  
...  
Keyword(s):  
Breast Cancer ◽  
Metastatic Breast Cancer ◽  
Self Assembly ◽  
Metastatic Cancer ◽  
Metastatic Breast ◽  
Md Simulations ◽  
Intermolecular Forces ◽  
The Self

Abstract Background: The treatment of metastatic cancer continues to be very challenging worldwide. Notably, excipient-free nanodispersions that are entirely composed of pharmaceutically active molecules are regarded as promising candidates for the next generation of drug formulations. These molecules are mainly formulated from the self-assembly of drug molecules that enable the safe and effective delivery of therapeutic drugs to local diseased lesions. Herein, we developed a novel and green approach for preparing nanoparticles via the self-assembly of rhein (RHE) and doxorubicin (DOX) molecules, named RHE/DOX nanoparticles (RD NPs); this assembly was associated with π−π stacking interactions and did not involve any organic solvents. Results：Molecular dynamics (MD) simulations showed that DOX molecules tend to assemble around RHE molecules through intermolecular forces. With the advantage of nanosizing, RD NPs improved the intracellular drug retention of DOX. As a dual-drug-loaded nanoformulation, the toxicity of RD NPs to tumor cells in vitro was synergistically enhanced. The combination of DOX and RHE in nanoparticles exhibited a synergistic effect with a combination index (CI) value of 0.51 and showed a stronger ability to induce cell apoptosis compared to that of free DOX. Furthermore, RD NPs treatment not only effectively suppressed primary tumor growth but also successfully inhibited tumor metastasis both in vitro and in vivo, with a good safety profile. Conclusion: The generation of pure nanodrugs via a self-assembly approach might be an option and may provide inspiration for the fabrication of new excipient-free nanodispersions, especially for two small molecular antitumor drugs that could potentially have synergistic antiproliferation effects against metastatic breast cancer.

scholarly journals Interaction of Aβ42 with Membranes Triggers the Self-Assembly into Oligomers

2020 ◽  
Vol 21 (3) ◽  
pp. 1129 ◽  
Author(s):  
Siddhartha Banerjee ◽  
Mohtadin Hashemi ◽  
Karen Zagorski ◽  
Yuri L. Lyubchenko
Keyword(s):  
Self Assembly ◽  
Membrane Surface ◽  
Amyloid Β ◽  
The Self ◽  
Bulk Solution ◽  
Aggregation Process ◽  
Physiological Concentration ◽  
Dynamics Simulations

The self-assembly of amyloid β (Aβ) proteins into oligomers is the major pathogenic event leading to Alzheimer’s disease (AD). Typical in vitro experiments require high protein concentrations, whereas the physiological concentration of Aβ is in the picomolar to low nanomolar range. This complicates the translation of results obtained in vitro to understanding the aggregation process in vivo. Here, we demonstrate that Aβ42 self-assembles into aggregates on membrane bilayers at low nanomolar concentrations - a pathway in which the membrane plays the role of a catalyst. Additionally, physiological ionic conditions (150 mM NaCl) significantly enhance on-membrane aggregation, leading to the rapid formation of oligomers. The self-assembly process is reversible, so assembled aggregates can dissociate from the membrane surface into the bulk solution to further participate in the aggregation process. Molecular dynamics simulations demonstrate that the transient membrane-Aβ interaction dramatically changes the protein conformation, facilitating the assembly of dimers. The results indicate peptide–membrane interaction is the critical step towards oligomer formation at physiologically low protein concentrations.

In vitro and in vivo polysaccharides assembly: ultrastructural and cytochemical study of growing plant cell wall components.

1978 ◽  
Vol 36 (2) ◽  
pp. 434-435
Author(s):  
D. Reis ◽  
B. Vian ◽  
J. C. Roland
Keyword(s):  
Cell Wall ◽  
Self Assembly ◽  
Plant Cell Wall ◽  
Higher Plants ◽  
Three Dimensional ◽  
Cytochemical Study ◽  
Wall Components

Wall morphogenesis in higher plants is a problem still open to controversy. Until now the possibility of a transmembrane control and the involvement of microtubules were mostly envisaged. Self-assembly processes have been observed in the case of walls of Chlamydomonas and bacteria. Spontaneous gelling interactions between xanthan and galactomannan from Ceratonia have been analyzed very recently. The present work provides indications that some processes of spontaneous aggregation could occur in higher plants during the formation and expansion of cell wall.Observations were performed on hypocotyl of mung bean (Phaseolus aureus) for which growth characteristics and wall composition have been previously defined.In situ, the walls of actively growing cells (primary walls) show an ordered three-dimensional organization (fig. 1). The wall is typically polylamellate with multifibrillar layers alternately transverse and longitudinal. Between these layers intermediate strata exist in which the orientation of microfibrils progressively rotates. Thus a progressive change in the morphogenetic activity occurs.

Programmable in vitro Co-Encapsidation of Guest Proteins Inside Protein Nanocages

2018 ◽  
Author(s):  
Noor H. Dashti ◽  
Rufika S. Abidin ◽  
Frank Sainsbury
Keyword(s):  
Self Assembly ◽  
Mammalian Cells ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Super Resolution ◽  
Cell Engineering ◽  
Particle Analysis ◽  
Protein Cages

Bioinspired self-sorting and self-assembling systems using engineered versions of natural protein cages have been developed for biocatalysis and therapeutic delivery. The packaging and intracellular delivery of guest proteins is of particular interest for both <i>in vitro</i> and <i>in vivo</i> cell engineering. However, there is a lack of platforms in bionanotechnology that combine programmable guest protein encapsidation with efficient intracellular uptake. We report a minimal peptide anchor for <i>in vivo</i> self-sorting of cargo-linked capsomeres of the Murine polyomavirus (MPyV) major coat protein that enables controlled encapsidation of guest proteins by <i>in vitro</i> self-assembly. Using Förster resonance energy transfer (FRET) we demonstrate the flexibility in this system to support co-encapsidation of multiple proteins. Complementing these ensemble measurements with single particle analysis by super-resolution microscopy shows that the stochastic nature of co-encapsidation is an overriding principle. This has implications for the design and deployment of both native and engineered self-sorting encapsulation systems and for the assembly of infectious virions. Taking advantage of the encoded affinity for sialic acids ubiquitously displayed on the surface of mammalian cells, we demonstrate the ability of self-assembled MPyV virus-like particles to mediate efficient delivery of guest proteins to the cytosol of primary human cells. This platform for programmable co-encapsidation and efficient cytosolic delivery of complementary biomolecules therefore has enormous potential in cell engineering.

scholarly journals Development of In Situ Self-Assembly Nanoparticles to Encapsulate Lopinavir and Ritonavir for Long-Acting Subcutaneous Injection

Pharmaceutics ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 904
Author(s):  
Irin Tanaudommongkon ◽  
Asama Tanaudommongkon ◽  
Xiaowei Dong
Keyword(s):  
Sustained Release ◽  
Trough Concentration ◽  
Self Assembly ◽  
Subcutaneous Injection ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Long Acting

Most antiretroviral medications for human immunodeficiency virus treatment and prevention require high levels of patient adherence, such that medications need to be administered daily without missing doses. Here, a long-acting subcutaneous injection of lopinavir (LPV) in combination with ritonavir (RTV) using in situ self-assembly nanoparticles (ISNPs) was developed to potentially overcome adherence barriers. The ISNP approach can improve the pharmacokinetic profiles of the drugs. The ISNPs were characterized in terms of particle size, drug entrapment efficiency, drug loading, in vitro release study, and in vivo pharmacokinetic study. LPV/RTV ISNPs were 167.8 nm in size, with a polydispersity index of less than 0.35. The entrapment efficiency was over 98% for both LPV and RTV, with drug loadings of 25% LPV and 6.3% RTV. A slow release rate of LPV was observed at about 20% on day 5, followed by a sustained release beyond 14 days. RTV released faster than LPV in the first 5 days and slower than LPV thereafter. LPV trough concentration remained above 160 ng/mL and RTV trough concentration was above 50 ng/mL after 6 days with one subcutaneous injection. Overall, the ISNP-based LPV/RTV injection showed sustained release profiles in both in vitro and in vivo studies.

scholarly journals Force generation by protein–DNA co-condensation

2021 ◽  
Author(s):  
Thomas Quail ◽  
Stefan Golfier ◽  
Maria Elsner ◽  
Keisuke Ishihara ◽  
Vasanthanarayan Murugesan ◽  
...  
Keyword(s):  
Optical Tweezers ◽  
Self Assembly ◽  
Spider Silk ◽  
Regulatory Elements ◽  
Heterochromatin Formation ◽  
First Order Phase Transition ◽  
Dna Strand ◽  
First Order Phase

AbstractInteractions between liquids and surfaces generate forces1,2 that are crucial for many processes in biology, physics and engineering, including the motion of insects on the surface of water3, modulation of the material properties of spider silk4 and self-assembly of microstructures5. Recent studies have shown that cells assemble biomolecular condensates via phase separation6. In the nucleus, these condensates are thought to drive transcription7, heterochromatin formation8, nucleolus assembly9 and DNA repair10. Here we show that the interaction between liquid-like condensates and DNA generates forces that might play a role in bringing distant regulatory elements of DNA together, a key step in transcriptional regulation. We combine quantitative microscopy, in vitro reconstitution, optical tweezers and theory to show that the transcription factor FoxA1 mediates the condensation of a protein–DNA phase via a mesoscopic first-order phase transition. After nucleation, co-condensation forces drive growth of this phase by pulling non-condensed DNA. Altering the tension on the DNA strand enlarges or dissolves the condensates, revealing their mechanosensitive nature. These findings show that DNA condensation mediated by transcription factors could bring distant regions of DNA into close proximity, suggesting that this physical mechanism is a possible general regulatory principle for chromatin organization that may be relevant in vivo.

Sign in / Sign up

Export Citation Format

Share Document