Desulfurization of Liquid Fuels by Adsorption on Carbon-Based Sorbents and Ultrasound-Assisted Sorbent Regeneration

Langmuir ◽  
2007 ◽  
Vol 23 (7) ◽  
pp. 3825-3831 ◽  
Author(s):  
Yuhe Wang ◽  
Ralph T. Yang
2015 ◽  
Vol 4 (1) ◽  
Author(s):  
Namrata D. Gaikwad ◽  
Parag R. Gogate

AbstractIn the present work, carbon based heterogeneous acid catalysts have been prepared using various synthesis approaches based on the use of sustainable starting materials. The properties of the catalysts have been investigated using Fourier transformed infra-red (FTIR), scanning electron microscopy (SEM), temperature-programmed desorption (NH


2020 ◽  
Vol 13 (5) ◽  
pp. 1300-1308 ◽  
Author(s):  
Siu-Fung Leung ◽  
Hui-Chun Fu ◽  
Maolin Zhang ◽  
Ali H. Hassan ◽  
Tao Jiang ◽  
...  

Sequestering CO2 in the form of carbon-based liquid fuels would provide both a convenient and sustainable form of energy for practical use as well as mitigate the effects of global warming and climate change.


2015 ◽  
Vol 196 ◽  
pp. 88-98 ◽  
Author(s):  
Jaykumar Bhasarkar ◽  
Arup Jyoti Borah ◽  
Pranab Goswami ◽  
Vijayanand S. Moholkar

2012 ◽  
Vol 51 (29) ◽  
pp. 9705-9712 ◽  
Author(s):  
Manohar Kumar Bolla ◽  
Hanif A. Choudhury ◽  
Vijayanand S. Moholkar

2005 ◽  
Vol 23 (3) ◽  
pp. 215-224 ◽  
Author(s):  
M. Fatih Demirbas

Coal and biomass consist carbon-based materials can be used as a source of chemicals. There are four widespread processes allow for making chemicals from coals and biomass: Gasification, liquefaction, direct conversion, and co-production of chemicals and fuels along with electricity. The carbon-based materials are gasified to produce synthesis gas (syngas) with a gasifier which is then converted to parafinic liquid fuels and chemicals by Fischer-Trops synthesis. The humus substances can be recovered from brown coal by alkali extraction. Ammonium sulfate from coal tar by pyrolysis can be converted to ammonia. Nitrogenous biomass materials such as animal and municipal wastes are nitrogen-rich materials. All natural systems include ammonia concentrations below 2 ppm.


2014 ◽  
Vol 28 (3) ◽  
pp. 1854-1859 ◽  
Author(s):  
Diego Carnaroglio ◽  
Emanuela Calcio Gaudino ◽  
Stefano Mantegna ◽  
Elizabeth M. Moreira ◽  
Antonio Vicente de Castro ◽  
...  

Author(s):  
Mohsen Ghamari ◽  
Ahmed Aboalhamayie

Recent studies have shown that addition of nano-sized particles to liquid fuels could significantly enhance major combustion characteristics such as burning rate and ignition delay. Colloidal suspensions are known to have enhanced optical properties and thermal conductivity compared to neat liquids; however, in the case of colloidal fuels, the main mechanism responsible for such enhanced properties is not well understood. To better understand these phenomena, colloidal suspensions of jet fuel and different types of carbon-based nanomaterials (carbon nanoparticles, multi-walled carbon nanotubes, and graphene nanoplatelets) prepared at different particle loadings were experimentally tested for their thermal conductivities. Colloidal suspensions of nanotubes showed higher conductivity compared to that of graphene and nanoparticle. This could justify higher burning rate of these fuels. Furthermore, and to differentiate between the effects of thermal conduction and radiation, droplet evaporations tests were carried out on colloidal suspensions of carbon nanoparticle under forced convection and in the absence of any radiation source. It was found that the presence of nanoparticle in jet fuel initially increases evaporation rate. However, a reduction in evaporation rate was observed at higher concentration as a result of particles agglomeration.


Sign in / Sign up

Export Citation Format

Share Document