scholarly journals Why Do Large-Scale Land Surface Models Produce a Low Ratio of Transpiration to Evapotranspiration?

2018 ◽  
Vol 123 (17) ◽  
pp. 9109-9130 ◽  
Author(s):  
Li-Ling Chang ◽  
Ravindra Dwivedi ◽  
John F. Knowles ◽  
Yuan-Hao Fang ◽  
Guo-Yue Niu ◽  
...  
2020 ◽  
Author(s):  
Elham Rouholahnejad Freund ◽  
Massimiliano Zappa ◽  
James W. Kirchner

Abstract. Evapotranspiration (ET) influences land-climate interactions, regulates the hydrological cycle, and contributes to the Earth's energy balance. Due to its feedbacks to large-scale hydrological processes and its impact on atmospheric dynamics, ET is a key driver of droughts and heatwaves. Existing land surface models differ substantially, both in their estimates of current ET fluxes and in their projections of how ET will evolve in the future. Any bias in estimated ET fluxes will affect the partitioning between sensible and latent heat, and thus alter model predictions of temperature and precipitation. One potential source of bias is the so-called aggregation bias that arises whenever nonlinear processes, such as those that regulate ET fluxes, are modeled using averages of heterogeneous inputs. Here we demonstrate a general mathematical approach to quantifying and correcting for this aggregation bias, using the GLEAM land evaporation model as a relatively simple example. We demonstrate that this aggregation bias can lead to substantial overestimates in ET fluxes in a typical large-scale land surface model when sub-grid heterogeneities in land surface properties are averaged out. Using Switzerland as a test case, we examine the scale-dependence of this aggregation bias and show that it can lead to overestimation of daily ET fluxes by as much as 21 % averaged over the whole country. We show how our approach can be used to identify the dominant drivers of aggregation bias, and to estimate sub-grid closure relationships that can correct for aggregation biases in ET estimates, without explicitly representing sub-grid heterogeneities in large-scale land surface models.


2021 ◽  
Author(s):  
Elham Rouholahnejad Freund ◽  
Massimiliano Zappa ◽  
Kirchner James

<p>Land surface models are highly uncertain in estimating evapotranspiration (ET) fluxes, and differ substantially in their projections of how ET will evolve in the future. Biases in estimated ET fluxes will affect the partitioning between sensible and latent heat, and thus alter simulated temperatures and model predictions of droughts and heatwaves. One potential source of bias is the "aggregation bias" that arises whenever nonlinear processes, such as those that regulate ET fluxes, are modeled using averages of heterogeneous inputs. Here we demonstrate that this aggregation bias leads to substantial overestimates in ET fluxes in a typical large-scale land surface model. The proposed methodology can be used to correct for aggregation biases in ET estimates by quantifying the effects of finer-resolution spatiotemporal variability in ET drivers at each modeling time step, without explicitly representing sub-grid heterogeneities in large-scale land surface models. </p>


2020 ◽  
Vol 24 (10) ◽  
pp. 5015-5025
Author(s):  
Elham Rouholahnejad Freund ◽  
Massimiliano Zappa ◽  
James W. Kirchner

Abstract. Evapotranspiration (ET) influences land–climate interactions, regulates the hydrological cycle, and contributes to the Earth's energy balance. Due to its feedback to large-scale hydrological processes and its impact on atmospheric dynamics, ET is one of the drivers of droughts and heatwaves. Existing land surface models differ substantially, both in their estimates of current ET fluxes and in their projections of how ET will evolve in the future. Any bias in estimated ET fluxes will affect the partitioning between sensible and latent heat and thus alter model predictions of temperature and precipitation. One potential source of bias is the so-called “aggregation bias” that arises whenever nonlinear processes, such as those that regulate ET fluxes, are modeled using averages of heterogeneous inputs. Here we demonstrate a general mathematical approach to quantifying and correcting for this aggregation bias, using the GLEAM land evaporation model as a relatively simple example. We demonstrate that this aggregation bias can lead to substantial overestimates in ET fluxes in a typical large-scale land surface model when sub-grid heterogeneities in land surface properties are averaged out. Using Switzerland as a test case, we examine the scale dependence of this aggregation bias and show that it can lead to an average overestimation of daily ET fluxes by as much as 10 % across the whole country (calculated as the median of the daily bias over the growing season). We show how our approach can be used to identify the dominant drivers of aggregation bias and to estimate sub-grid closure relationships that can correct for aggregation biases in ET estimates, without explicitly representing sub-grid heterogeneities in large-scale land surface models.


2020 ◽  
Author(s):  
Elizabeth Cooper ◽  
Eleanor Blyth ◽  
Hollie Cooper ◽  
Rich Ellis ◽  
Ewan Pinnington ◽  
...  

Abstract. Soil moisture predictions from land surface models are important in hydrological, ecological and meteorological applications. In recent years the availability of wide-area soil-moisture measurements has increased, but few studies have combined model-based soil moisture predictions with in-situ observations beyond the point scale. Here we show that we can markedly improve soil moisture estimates from the JULES land surface model using field scale observations and data assimilation techniques. Rather than directly updating soil moisture estimates towards observed values, we optimize constants in the underlying pedotransfer functions, which relate soil texture to JULES soil physics parameters. In this way we generate a single set of newly calibrated pedotransfer functions based on observations from a number of UK sites with different soil textures. We demonstrate that calibrating a pedotransfer function in this way can improve the performance of land surface models, leading to the potential for better flood, drought and climate projections.


2015 ◽  
Vol 12 (24) ◽  
pp. 7503-7518 ◽  
Author(s):  
M. G. De Kauwe ◽  
S.-X. Zhou ◽  
B. E. Medlyn ◽  
A. J. Pitman ◽  
Y.-P. Wang ◽  
...  

Abstract. Future climate change has the potential to increase drought in many regions of the globe, making it essential that land surface models (LSMs) used in coupled climate models realistically capture the drought responses of vegetation. Recent data syntheses show that drought sensitivity varies considerably among plants from different climate zones, but state-of-the-art LSMs currently assume the same drought sensitivity for all vegetation. We tested whether variable drought sensitivities are needed to explain the observed large-scale patterns of drought impact on the carbon, water and energy fluxes. We implemented data-driven drought sensitivities in the Community Atmosphere Biosphere Land Exchange (CABLE) LSM and evaluated alternative sensitivities across a latitudinal gradient in Europe during the 2003 heatwave. The model predicted an overly abrupt onset of drought unless average soil water potential was calculated with dynamic weighting across soil layers. We found that high drought sensitivity at the most mesic sites, and low drought sensitivity at the most xeric sites, was necessary to accurately model responses during drought. Our results indicate that LSMs will over-estimate drought impacts in drier climates unless different sensitivity of vegetation to drought is taken into account.


2015 ◽  
Vol 12 (15) ◽  
pp. 12349-12393 ◽  
Author(s):  
M. G. De Kauwe ◽  
S.-X. Zhou ◽  
B. E. Medlyn ◽  
A. J. Pitman ◽  
Y.-P. Wang ◽  
...  

Abstract. Future climate change has the potential to increase drought in many regions of the globe, making it essential that land surface models (LSMs) used in coupled climate models, realistically capture the drought responses of vegetation. Recent data syntheses show that drought sensitivity varies considerably among plants from different climate zones, but state-of-the-art LSMs currently assume the same drought sensitivity for all vegetation. We tested whether variable drought sensitivities are needed to explain the observed large-scale patterns of drought impact. We implemented data-driven drought sensitivities in the Community Atmosphere Biosphere Land Exchange (CABLE) LSM and evaluated alternative sensitivities across a latitudinal gradient in Europe during the 2003 heatwave. The model predicted an overly abrupt onset of drought unless average soil water potential was calculated with dynamic weighting across soil layers. We found that high drought sensitivity at the northernmost sites, and low drought sensitivity at the southernmost sites, was necessary to accurately model responses during drought. Our results indicate that LSMs will over-estimate drought impacts in drier climates unless different sensitivity of vegetation to drought is taken into account.


Water ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 356 ◽  
Author(s):  
Alberto Martínez-de la Torre ◽  
Eleanor Blyth ◽  
Emma Robinson

A key aspect of the land surface response to the atmosphere is how quickly it dries after a rainfall event. It is key because it will determine the intensity and speed of the propagation of drought and also affects the atmospheric state through changes in the surface heat exchanges. Here, we test the theory that this response can be studied as an inherent property of the land surface that is unchanging over time unless the above- and below-ground structures change. This is important as a drydown metric can be used to evaluate a landscape and its response to atmospheric drivers in models used in coupled land–atmosphere mode when the forcing is often not commensurate with the actual atmosphere. We explore whether the speed of drying of a land unit can be quantified and how this can be used to evaluate models. We use the most direct observation of drying: the rate of change of evapotranspiration after a rainfall event using eddy-covariance observations, or commonly referred to as flux tower data. We analyse the data and find that the drydown timescale is characteristic of different land cover types, then we use that to evaluate a suite of global hydrological and land surface models. We show that, at the site level, the data suggest that evapotranspiration decay timescales are longer for trees than for grasslands. The studied model’s accuracy to capture the site drydown timescales depends on the specific model, the site, and the vegetation cover representation. A more robust metric is obtained by grouping the modeled data by vegetation type and, using this, we find that land surface models capture the characteristic timescale difference between trees and grasslands, found using flux data, better than large-scale hydrological models. We thus conclude that the drydown metric has value in understanding land–atmosphere interactions and model evaluation.


2019 ◽  
Author(s):  
Fuad Yassin ◽  
Saman Razavi ◽  
Mohamed Elshamy ◽  
Bruce Davison ◽  
Gonzalo Sapriza-Azuri ◽  
...  

Abstract. Reservoirs significantly affect flow regimes in watershed systems by changing the magnitude and timing of streamflows. Failure to represent these effects limits the performance of hydrological and land surface models (H-LSMs) in the many highly regulated basins across the globe and limits the applicability of such models to investigate the futures of watershed systems through scenario analysis (e.g., scenarios of climate, land use, or reservoir regulation changes). An adequate representation of reservoirs and their operation in an H-LSM is therefore essential for a realistic representation of the downstream flow regime. In this paper, we present a general parametric reservoir operation model based on piecewise linear relationships between reservoir storage, inflow, and release, to approximate actual reservoir operations. For the identification of the model parameters, we propose two strategies: (a) a generalized parameterization that requires a relatively limited amount of data; and (b) direct calibration via multi-objective optimization when more data on historical storage and release are available. We use data from 37 reservoir case studies located in several regions across the globe for developing and testing the model. We further build this reservoir operation model into the MESH modelling system, which is a large-scale H-LSM. Our results across the case studies show that the proposed reservoir model with both of the parameter identification strategies leads to improved simulation accuracy compared with the other widely used approaches for reservoir operation simulation. We further show the significance of enabling MESH with this reservoir model and discuss the interdependent effects of the simulation accuracy of natural processes and that of reservoir operation on the overall model performance. The reservoir operation model is generic and can be integrated into any H-LSM.


Sign in / Sign up

Export Citation Format

Share Document