How a new instrument affects pilots' mental workload

1982 ◽  
Author(s):  
Randall L. Harris ◽  
John R. Tole ◽  
Arye R. Ephrath ◽  
A. Thomas Stephens
Keyword(s):  
Mental Workload ◽  
New Instrument

How a New Instrument Affects Pilots' Mental Workload

1982 ◽  
Vol 26 (11) ◽  
pp. 1010-1013 ◽  
Author(s):  
Randall L. Harris ◽  
John R. Tole ◽  
Arye R. Ephrath ◽  
A. Thomas Stephens
Keyword(s):  
Reaction Time ◽  
Mental Workload ◽  
Testing Procedure ◽  
General Aviation ◽  
Cognitive Workload ◽  
Analysis Techniques ◽  
Subjective Evaluations ◽  
New Instrument ◽  
Vertical Speed ◽  
Scanning Behavior

Display evaluation has generally been performed using reaction time experiments or subjective evaluations to determine which display is better suited for a particular application. A new testing procedure combined with two analysis techniques of scanning behavior have been used to evaluate two alternative display designs in a realistic setting. Tests were conducted in the Langley Research Center's General Aviation Simulator. The results indicated that a new bargraph type of vertical speed indicator located between the attitude indicator and the altimeter is looked at more quickly, appears to lower cognitive workload slightly, and was preferred over a conventional vertical speed indicator.

Development and validation of a simulation workload measure: The Simulation Task Load Index (SIM-TLX)

2019 ◽  
Author(s):  
David Harris ◽  
Mark Wilson ◽  
Samuel James Vine
Keyword(s):  
Virtual Reality ◽  
Convergent Validity ◽  
Task Complexity ◽  
Mental Workload ◽  
Careful Consideration ◽  
Future Research ◽  
Task Load ◽  
Simulated Environments ◽  
Novel Approach ◽  
New Instrument

Background: Virtual reality (VR) simulation offers significant potential for human factors training as it provides a novel approach which enables training in environments that are otherwise dangerous, impractical or expensive to simulate. While VR training has been adopted in many environments, such as heavy industry, surgery and aviation, there remains an inadequate understanding of how virtual simulations impact cognitive factors. One such factor, which needs careful consideration during the design of VR simulations, is the degree of mental or cognitive load experienced during training. Objective: This study aimed to validate a newly developed measure of workload, based on existing instruments (e.g. the NASA-TLX), but tailored to the specific demands placed on users of simulated environments. Method: While participants completed a VR puzzle game, a series of experimental manipulations of workload were used to assess the sensitivity of the new instrument. Results: The manipulations affected the questionnaire subscales (mental demands; physical demands; temporal demands; frustration; task complexity; situational stress; distraction; perceptual strain; task control; presence) as predicted in all cases (ps<.05), except for presence, which displayed little relationship with other aspects of task load. Conclusions: The scale was also found to have good convergent validity with an alternate index of task load. The findings support the sensitivity of the new instrument for assessing task load in virtual reality. Application: Overall, this study contributes to the understanding of mental workload in simulated environments and provides a practical tool for use in both future research and applications in the field.

scholarly journals Development and validation of a simulation workload measure: the simulation task load index (SIM-TLX)

2019 ◽  
Vol 24 (4) ◽  
pp. 557-566 ◽  
Author(s):  
David Harris ◽  
Mark Wilson ◽  
Samuel Vine
Keyword(s):  
Virtual Reality ◽  
Convergent Validity ◽  
Task Complexity ◽  
Mental Workload ◽  
Careful Consideration ◽  
Future Research ◽  
Task Load ◽  
Simulated Environments ◽  
Novel Approach ◽  
New Instrument

AbstractVirtual reality (VR) simulation offers significant potential for human factors training as it provides a novel approach which enables training in environments that are otherwise dangerous, impractical or expensive to simulate. While VR training has been adopted in many environments, such as heavy industry, surgery and aviation, there remains an inadequate understanding of how virtual simulations impact cognitive factors. One such factor, which needs careful consideration during the design of VR simulations, is the degree of mental or cognitive load experienced during training. This study aimed to validate a newly developed measure of workload, based on existing instruments (e.g. the NASA-TLX), but tailored to the specific demands placed on users of simulated environments. While participants completed a VR puzzle game, a series of experimental manipulations of workload were used to assess the sensitivity of the new instrument. The manipulations affected the questionnaire subscales (mental demands; physical demands; temporal demands; frustration; task complexity; situational stress; distraction; perceptual strain; task control; presence) as predicted in all cases (ps < .05), except for presence, which displayed little relationship with other aspects of task load. The scale was also found to have good convergent validity with an alternate index of task load. The findings support the sensitivity of the new instrument for assessing task load in virtual reality. Overall, this study contributes to the understanding of mental workload in simulated environments and provides a practical tool for use in both future research and applications in the field.

A New High Resolution Transmission Electron Microscope with Second-Zone Objective Lens

1969 ◽  
Vol 27 ◽  
pp. 176-177 ◽  
Author(s):  
H. Tochigi ◽  
H. Uchida ◽  
S. Shirai ◽  
K. Akashi ◽  
D. J. Evins ◽  
...  
Keyword(s):  
Electron Microscope ◽  
High Resolution ◽  
Transmission Electron Microscope ◽  
Objective Lens ◽  
High Excitation ◽  
Transmission Electron ◽  
New Instrument

A New High Excitation Objective Lens (Second-Zone Objective Lens) was discussed at Twenty-Sixth Annual EMSA Meeting. A new commercially available Transmission Electron Microscope incorporating this new lens has been completed.Major advantages of the new instrument allow an extremely small beam to be produced on the specimen plane which minimizes specimen beam damages, reduces contamination and drift.

Digital imaging: When should one take the plunge?

1996 ◽  
Vol 54 ◽  
pp. 602-603
Author(s):  
John F. Mansfield
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Optical Microscopy ◽  
Digital Imaging ◽  
Storage Devices ◽  
Major Benefit ◽  
Transmission Electron ◽  
New Instrument ◽  
Scanning Electron

The current imaging trend in optical microscopy, scanning electron microscopy (SEM) or transmission electron microscopy (TEM) is to record all data digitally. Most manufacturers currently market digital acquisition systems with their microscope packages. The advantages of digital acquisition include: almost instant viewing of the data as a high-quaity positive image (a major benefit when compared to TEM images recorded onto film, where one must wait until after the microscope session to develop the images); the ability to readily quantify features in the images and measure intensities; and extremely compact storage (removable 5.25” storage devices which now can hold up to several gigabytes of data).The problem for many researchers, however, is that they have perfectly serviceable microscopes that they routinely use that have no digital imaging capabilities with little hope of purchasing a new instrument.

Design of a Spectroscopic Low-Energy Emission Microscope

1990 ◽  
Vol 48 (1) ◽  
pp. 358-359
Author(s):  
Lee H. Veneklasen
Keyword(s):  
Parallel Imaging ◽  
Objective Lens ◽  
Energy Window ◽  
Flat Surfaces ◽  
Beam Voltage ◽  
New Instrument ◽  
Real Time Image ◽  
Image Planes ◽  
Backscatter Diffraction ◽  
Time Image

This paper discusses some of the unique aspects of a spectroscopic emission microscope now being tested in Clausthal. The instrument is designed for the direct parallel imaging of both elastic and inelastic electrons from flat surfaces. Elastic contrast modes of the familiar LEEM include large and small angle LEED, mirror microscopy, backscatter diffraction contrast (for imaging of surface structure), and phase contrast (for imaging of step dynamics)(1). Inelastic modes include topology sensitive secondary, and work function sensitive photoemission. Most important, the new instrument will also allow analytical imaging using characteristic Auger or soft X-ray emissions. The basic instrument has been described by Bauer and Telieps (2). This configuration has been redesigned to include an airlock, and a LaB6 gun, triple condensor lens, magnetic objective lens, a double focussing separator field, an imaging energy analyzer, and a real time image processor.Fig. 1 shows the new configuration. The basic beam voltage supply Vo = 20 KV, upon which separate supplies for the gun Vg, specimen Vs, lens electrode Vf, and analyzer bias Vb float. The incident energy at the sample can be varied from Vs = 0-1 KV for elastic imaging, or from Vg + Vs = (3 + Vs) KV for inelastic imaging. The image energy window Vs±V/2 may be varied without readjusting either the illumation, or imaging/analyzer optics. The diagram shows conjugate diffraction and image planes. The apertures defining incoming Humiliation and outgoing image angles are placed below the separator magnet to allow for their independent optimization. The instrument can illuminate and image 0.5-100 μm fields at 0-1 keV emission energies with an energy window down to 0.2 eV.

Assessing manual dexterity: pilot study of a new instrument

1981 ◽  
Vol 45 (2) ◽  
pp. 71-73 ◽  
Author(s):  
P Weinstein ◽  
HA Kiyak
Keyword(s):  
Pilot Study ◽  
Manual Dexterity ◽  
New Instrument

Further Insights Into the German Version of the Multidimensional Assessment of Interoceptive Awareness (MAIA)

2019 ◽  
Vol 35 (3) ◽  
pp. 317-325 ◽  
Author(s):  
Dorota Reis
Keyword(s):  
Structural Equation Modeling ◽  
Structural Equation ◽  
Equation Modeling ◽  
Interoceptive Awareness ◽  
Multidimensional Assessment ◽  
New Instrument ◽  
Confirmatory Factor ◽  
Complex Models ◽  
Approximate Zero ◽  
Bayesian Structural Equation Modeling

Abstract. Interoception is defined as an iterative process that refers to receiving, accessing, appraising, and responding to body sensations. Recently, following an extensive process of development, Mehling and colleagues (2012) proposed a new instrument, the Multidimensional Assessment of Interoceptive Awareness (MAIA), which captures these different aspects of interoception with eight subscales. The aim of this study was to reexamine the dimensionality of the MAIA by applying maximum likelihood confirmatory factor analysis (ML-CFA), exploratory structural equation modeling (ESEM), and Bayesian structural equation modeling (BSEM). ML-CFA, ESEM, and BSEM were examined in a sample of 320 German adults. ML-CFA showed a poor fit to the data. ESEM yielded a better fit and contained numerous significant cross-loadings, of which one was substantial (≥ .30). The BSEM model with approximate zero informative priors yielded an excellent fit and confirmed the substantial cross-loading found in ESEM. The study demonstrates that ESEM and BSEM are flexible techniques that can be used to improve our understanding of multidimensional constructs. In addition, BSEM can be seen as less exploratory than ESEM and it might also be used to overcome potential limitations of ESEM with regard to more complex models relative to the sample size.

Development of the Fear of Intimacy Components Questionnaire (FICQ)

2015 ◽  
Vol 31 (4) ◽  
pp. 302-309 ◽  
Author(s):  
Maria Pedro Sobral ◽  
Maria Emília Costa
Keyword(s):  
Convergent Validity ◽  
Discriminant Validity ◽  
Two Dimensions ◽  
Dimensional Structure ◽  
Future Research ◽  
Fear Of Intimacy ◽  
Confirmatory Factor Analyses ◽  
New Instrument ◽  
Confirmatory Factor ◽  
Test Retest Reliability

Abstract. We developed a new instrument designed to measure fear of intimacy in romantic relationships. We suggest assessing fear of intimacy through two dimensions: self-revelation and dependence. The Fear of Intimacy Components Questionnaire (FICQ) was validated across three studies in which a 10-item solution systematically emerged. Consistently with a two component perspective, a two-factor solution fitted data the best: fear of losing the self (FLS) and fear of losing the other (FLO). Qualitative analyses verified content validity. Exploratory and confirmatory factor analyses tested the factor structure. Multigroup analyses supported the structural invariance across gender, age, and relationship status. Both factors showed adequate discriminant validity and internal consistency, and good 3-week period test-retest reliability. Associations between the FICQ and insecure attachment orientations demonstrated convergent validity. The association between the FICQ and relationship satisfaction above and beyond a preexisting measure offered criterion validity. By going beyond traditional self-revelation-focused conception of fear of intimacy, that is, by proposing a bi-dimensional structure to fear of intimacy, we believe that this new measure will contribute to future research on fear of intimacy.

New Instrument

1985 ◽  
Author(s):  
Keyword(s):  
New Instrument
Sign in / Sign up

Export Citation Format

Share Document