scholarly journals A safety cap protects hydrogenase from oxygen attack

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Martin Winkler ◽  
Jifu Duan ◽  
Andreas Rutz ◽  
Christina Felbek ◽  
Lisa Scholtysek ◽  
...  
Keyword(s):  
Protein Design ◽  
Direct Electrochemistry ◽  
Local Environment ◽  
Cysteine Residue ◽  
Clostridium Beijerinckii ◽  
Protection Mechanism ◽  
X Ray ◽  
X Ray Crystallography ◽  
Rational Protein Design ◽  
Conserved Amino Acids

Abstract[FeFe]-hydrogenases are efficient H2-catalysts, yet upon contact with dioxygen their catalytic cofactor (H-cluster) is irreversibly inactivated. Here, we combine X-ray crystallography, rational protein design, direct electrochemistry, and Fourier-transform infrared spectroscopy to describe a protein morphing mechanism that controls the reversible transition between the catalytic Hox-state and the inactive but oxygen-resistant Hinact-state in [FeFe]-hydrogenase CbA5H of Clostridium beijerinckii. The X-ray structure of air-exposed CbA5H reveals that a conserved cysteine residue in the local environment of the active site (H-cluster) directly coordinates the substrate-binding site, providing a safety cap that prevents O2-binding and consequently, cofactor degradation. This protection mechanism depends on three non-conserved amino acids situated approximately 13 Å away from the H-cluster, demonstrating that the 1st coordination sphere chemistry of the H-cluster can be remote-controlled by distant residues.

scholarly journals Monothiol and dithiol glutaredoxin-1 from Clostridium oremlandii: identification of domain-swapped structures by NMR, X-ray crystallography and HDX mass spectrometry

IUCrJ ◽  
2020 ◽  
Vol 7 (6) ◽  
pp. 1019-1027
Author(s):  
Kitaik Lee ◽  
Kwon Joo Yeo ◽  
Sae Hae Choi ◽  
Eun Hye Lee ◽  
Bo Keun Kim ◽  
...  
Keyword(s):  
Mass Spectrometry ◽  
Disulfide Bond ◽  
Protein Function ◽  
Single Point ◽  
Cysteine Residue ◽  
Single Point Mutation ◽  
Protein Oligomerization ◽  
X Ray ◽  
X Ray Crystallography ◽  
Hydrogen Deuterium

Protein dimerization or oligomerization resulting from swapping part of the protein between neighboring polypeptide chains is known to play a key role in the regulation of protein function and in the formation of protein aggregates. Glutaredoxin-1 from Clostridium oremlandii (cGrx1) was used as a model to explore the formation of multiple domain-swapped conformations, which were made possible by modulating several hinge-loop residues that can form a pivot for domain swapping. Specifically, two alternative domain-swapped structures were generated and analyzed using nuclear magnetic resonance (NMR), X-ray crystallography, circular-dichroism spectroscopy and hydrogen/deuterium-exchange (HDX) mass spectrometry. The first domain-swapped structure (β3-swap) was formed by the hexameric cGrx1–cMsrA complex. The second domain-swapped structure (β1-swap) was formed by monothiol cGrx1 (C16S) alone. In summary, the first domain-swapped structure of an oxidoreductase in a hetero-oligomeric complex is presented. In particular, a single point mutation of a key cysteine residue to serine led to the formation of an intramolecular disulfide bond, as opposed to an intermolecular disulfide bond, and resulted in modulation of the underlying free-energy landscape of protein oligomerization.

scholarly journals Time-resolved crystallography and protein design: signalling photoreceptors and optogenetics

2014 ◽  
Vol 369 (1647) ◽  
pp. 20130568 ◽  
Author(s):  
Keith Moffat
Keyword(s):  
Protein Design ◽  
Structural Changes ◽  
Fast Time ◽  
Free Electron Lasers ◽  
Time Resolved ◽  
X Ray ◽  
Biological Targets ◽  
X Ray Crystallography ◽  
X Ray Scattering ◽  
Exciting Possibility

Time-resolved X-ray crystallography and solution scattering have been successfully conducted on proteins on time-scales down to around 100 ps, set by the duration of the hard X-ray pulses emitted by synchrotron sources. The advent of hard X-ray free-electron lasers (FELs), which emit extremely intense, very brief, coherent X-ray pulses, opens the exciting possibility of time-resolved experiments with femtosecond time resolution on macromolecular structure, in both single crystals and solution. The X-ray pulses emitted by an FEL differ greatly in many properties from those emitted by a synchrotron, in ways that at first glance make time-resolved measurements of X-ray scattering with the required accuracy extremely challenging. This opens up several questions which I consider in this brief overview. Are there likely to be chemically and biologically interesting structural changes to be revealed on the femtosecond time-scale? How shall time-resolved experiments best be designed and conducted to exploit the properties of FELs and overcome challenges that they pose? To date, fast time-resolved reactions have been initiated by a brief laser pulse, which obviously requires that the system under study be light-sensitive. Although this is true for proteins of the visual system and for signalling photoreceptors, it is not naturally the case for most interesting biological systems. To generate more biological targets for time-resolved study, can this limitation be overcome by optogenetic, chemical or other means?

scholarly journals Ensemble-based enzyme design can recapitulate the effects of laboratory directed evolution in silico

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Aron Broom ◽  
Rojo V. Rakotoharisoa ◽  
Michael C. Thompson ◽  
Niayesh Zarifi ◽  
Erin Nguyen ◽  
...  
Keyword(s):  
Directed Evolution ◽  
Protein Design ◽  
Active Site ◽  
Room Temperature ◽  
De Novo ◽  
Conformational Ensemble ◽  
Enzyme Design ◽  
X Ray ◽  
Conformational Ensembles ◽  
X Ray Crystallography

Abstract The creation of artificial enzymes is a key objective of computational protein design. Although de novo enzymes have been successfully designed, these exhibit low catalytic efficiencies, requiring directed evolution to improve activity. Here, we use room-temperature X-ray crystallography to study changes in the conformational ensemble during evolution of the designed Kemp eliminase HG3 (kcat/KM 146 M−1s−1). We observe that catalytic residues are increasingly rigidified, the active site becomes better pre-organized, and its entrance is widened. Based on these observations, we engineer HG4, an efficient biocatalyst (kcat/KM 103,000 M−1s−1) containing key first and second-shell mutations found during evolution. HG4 structures reveal that its active site is pre-organized and rigidified for efficient catalysis. Our results show how directed evolution circumvents challenges inherent to enzyme design by shifting conformational ensembles to favor catalytically-productive sub-states, and suggest improvements to the design methodology that incorporate ensemble modeling of crystallographic data.

scholarly journals Hierarchical design of multi-scale protein complexes by combinatorial assembly of oligomeric helical bundle and repeat protein building blocks

2020 ◽  
Author(s):  
Yang Hsia ◽  
Rubul Mout ◽  
William Sheffler ◽  
Natasha I. Edman ◽  
Ivan Vulovic ◽  
...  
Keyword(s):  
Protein Design ◽  
De Novo ◽  
Protein Complexes ◽  
Building Blocks ◽  
Hierarchical Design ◽  
X Ray ◽  
Helical Bundle ◽  
X Ray Crystallography ◽  
Repeat Proteins ◽  
Wide Range

AbstractA goal of de novo protein design is to develop a systematic and robust approach to generating complex nanomaterials from stable building blocks. Due to their structural regularity and simplicity, a wide range of monomeric repeat proteins and oligomeric helical bundle structures have been designed and characterized. Here we describe a stepwise hierarchical approach to building up multi-component symmetric protein assemblies using these structures. We first connect designed helical repeat proteins (DHRs) to designed helical bundle proteins (HBs) to generate a large library of heterodimeric and homooligomeric building blocks; the latter have cyclic symmetries ranging from C2 to C6. All of the building blocks have repeat proteins with accessible termini, which we take advantage of in a second round of architecture guided rigid helical fusion (WORMS) to generate larger symmetric assemblies including C3 and C5 cyclic and D2 dihedral rings, a tetrahedral cage, and a 120 subunit icosahedral cage. Characterization of the structures by small angle x-ray scattering, x-ray crystallography, and cryo-electron microscopy demonstrates that the hierarchical design approach can accurately and robustly generate a wide range of macromolecular assemblies; with a diameter of 43nm, the icosahedral nanocage is the largest structurally validated designed cage to date. The computational methods and building block sets described here provide a very general route to new de novo designed symmetric protein nanomaterials.

scholarly journals Evolution of an enzyme conformational ensemble guides design of an efficient biocatalyst

2020 ◽  
Author(s):  
Aron Broom ◽  
Rojo V. Rakotoharisoa ◽  
Michael C. Thompson ◽  
Niayesh Zarifi ◽  
Erin Nguyen ◽  
...  
Keyword(s):  
Directed Evolution ◽  
Protein Design ◽  
Active Site ◽  
Room Temperature ◽  
De Novo ◽  
Conformational Ensemble ◽  
Enzyme Design ◽  
X Ray ◽  
Conformational Ensembles ◽  
X Ray Crystallography

AbstractThe creation of artificial enzymes is a key objective of computational protein design. Although de novo enzymes have been successfully designed, these exhibit low catalytic efficiencies, requiring directed evolution to improve activity. Here, we used room-temperature X-ray crystallography to study changes in the conformational ensemble during evolution of the designed Kemp eliminase HG3 (kcat/KM 160 M−1s−1). We observed that catalytic residues were increasingly rigidified, the active site became better pre-organized, and its entrance was widened. Based on these observations, we engineered HG4, an efficient biocatalyst (kcat/KM 120,000 M−1s−1) containing active-site mutations found during evolution but not distal ones. HG4 structures revealed that its active site was pre-organized and rigidified for efficient catalysis. Our results show how directed evolution circumvents challenges inherent to enzyme design by shifting conformational ensembles to favor catalytically-productive sub-states, and suggest improvements to the design methodology that incorporate ensemble modeling of crystallographic data.

Difference Fourier Analysis of Glucose Embedded and Frozen Hydrated Purple Membrane

1982 ◽  
Vol 40 ◽  
pp. 74-75
Author(s):  
Jules S. Jaffe ◽  
Robert M. Glaeser
Keyword(s):  
Purple Membrane ◽  
Data Set ◽  
High Resolution Data ◽  
X Ray ◽  
X Ray Crystallography ◽  
Fourier Techniques ◽  
Versus Protein ◽  
The Difference ◽  
Difference Fourier ◽  
Ideal Method

Although difference Fourier techniques are standard in X-ray crystallography it has only been very recently that electron crystallographers have been able to take advantage of this method. We have combined a high resolution data set for frozen glucose embedded Purple Membrane (PM) with a data set collected from PM prepared in the frozen hydrated state in order to visualize any differences in structure due to the different methods of preparation. The increased contrast between protein-ice versus protein-glucose may prove to be an advantage of the frozen hydrated technique for visualizing those parts of bacteriorhodopsin that are embedded in glucose. In addition, surface groups of the protein may be disordered in glucose and ordered in the frozen state. The sensitivity of the difference Fourier technique to small changes in structure provides an ideal method for testing this hypothesis.

3-D reconstruction of molecular shape from microcrystal thin sections

1983 ◽  
Vol 41 ◽  
pp. 748-749
Author(s):  
S. Cusack ◽  
J.-C. Jésior
Keyword(s):  
Three Dimensional ◽  
Molecular Shape ◽  
Biological Molecules ◽  
Fourier Space ◽  
Single Particles ◽  
Thin Sections ◽  
Standard Methods ◽  
X Ray ◽  
X Ray Crystallography ◽  
Dimensional Reconstruction

Three-dimensional reconstruction techniques using electron microscopy have been principally developed for application to 2-D arrays (i.e. monolayers) of biological molecules and symmetrical single particles (e.g. helical viruses). However many biological molecules that crystallise form multilayered microcrystals which are unsuitable for study by either the standard methods of 3-D reconstruction or, because of their size, by X-ray crystallography. The grid sectioning technique enables a number of different projections of such microcrystals to be obtained in well defined directions (e.g. parallel to crystal axes) and poses the problem of how best these projections can be used to reconstruct the packing and shape of the molecules forming the microcrystal.Given sufficient projections there may be enough information to do a crystallographic reconstruction in Fourier space. We however have considered the situation where only a limited number of projections are available, as for example in the case of catalase platelets where three orthogonal and two diagonal projections have been obtained (Fig. 1).

Electron microscopy of rabbit FC crystals

1983 ◽  
Vol 41 ◽  
pp. 730-731
Author(s):  
Robert A. Grant ◽  
Laura L. Degn ◽  
Wah Chiu ◽  
John Robinson
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
High Resolution Electron Microscopy ◽  
Molecular Replacement ◽  
X Ray ◽  
X Ray Crystallography ◽  
Resolution Electron ◽  
Replacement Technique ◽  
Hydrated Crystal ◽  
Molecular Structure Analysis

Proteolytic digestion of the immunoglobulin IgG with papain cleaves the molecule into an antigen binding fragment, Fab, and a compliment binding fragment, Fc. Structures of intact immunoglobulin, Fab and Fc from various sources have been solved by X-ray crystallography. Rabbit Fc can be crystallized as thin platelets suitable for high resolution electron microscopy. The structure of rabbit Fc can be expected to be similar to the known structure of human Fc, making it an ideal specimen for comparing the X-ray and electron crystallographic techniques and for the application of the molecular replacement technique to electron crystallography. Thin protein crystals embedded in ice diffract to high resolution. A low resolution image of a frozen, hydrated crystal can be expected to have a better contrast than a glucose embedded crystal due to the larger density difference between protein and ice compared to protein and glucose. For these reasons we are using an ice embedding technique to prepare the rabbit Fc crystals for molecular structure analysis by electron microscopy.

Sign in / Sign up

Export Citation Format

Share Document