scholarly journals Atomic-scale unveiling of multiphase evolution during hydrated Zn-ion insertion in vanadium oxide

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Pilgyu Byeon ◽  
Youngjae Hong ◽  
Hyung Bin Bae ◽  
Jaeho Shin ◽  
Jang Wook Choi ◽  
...  
Keyword(s):  
High Capacity ◽  
Diffraction Method ◽  
Phase Evolution ◽  
Atomic Scale ◽  
Atomic Column ◽  
Intermediate Phases ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Transition Barrier ◽  
Zn Ions

AbstractAn initial crystalline phase can transform into another phases as cations are electrochemically inserted into its lattice. Precise identification of phase evolution at an atomic level during transformation is thus the very first step to comprehensively understand the cation insertion behavior and subsequently achieve much higher storage capacity in rechargeable cells, although it is sometimes challenging. By intensively using atomic-column-resolved scanning transmission electron microscopy, we directly visualize the simultaneous intercalation of both H2O and Zn during discharge of Zn ions into a V2O5 cathode with an aqueous electrolyte. In particular, when further Zn insertion proceeds, multiple intermediate phases, which are not identified by a macroscopic powder diffraction method, are clearly imaged at an atomic scale, showing structurally topotactic correlation between the phases. The findings in this work suggest that smooth multiphase evolution with a low transition barrier is significantly related to the high capacity of oxide cathodes for aqueous rechargeable cells, where the crystal structure of cathode materials after discharge differs from the initial crystalline state in general.

Electron Microscopy Studies of The Chemistry And Microstructure of BaF2 / YBa2Cu3O7-x Thin Films

1994 ◽  
Vol 52 ◽  
pp. 796-797
Author(s):  
J. L. Lee ◽  
C. A. Weiss ◽  
R. A. Buhrman ◽  
J. Silcox
Keyword(s):  
Thin Film ◽  
Electron Microscopy ◽  
Thin Films ◽  
Scanning Transmission Electron Microscope ◽  
Atomic Scale ◽  
Island Growth ◽  
Multilayer Systems ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Mgo Substrate

BaF2 thin films are being investigated as candidates for use in YBa2Cu3O7-x (YBCO) / BaF2 thin film multilayer systems, given the favorable dielectric properties of BaF2. In this study, the microstructural and chemical compatibility of BaF2 thin films with YBCO thin films is examined using transmission electron microscopy and microanalysis. The specimen was prepared by using laser ablation to first deposit an approximately 2500 Å thick (0 0 1) YBCO thin film onto a (0 0 1) MgO substrate. An approximately 7500 Å thick (0 0 1) BaF2 thin film was subsequendy thermally evaporated onto the YBCO film.Images from a VG HB501A UHV scanning transmission electron microscope (STEM) operating at 100 kV show that the thickness of the BaF2 film is rather uniform, with the BaF2/YBCO interface being quite flat. Relatively few intrinsic defects, such as hillocks and depressions, were evident in the BaF2 film. Moreover, the hillocks and depressions appear to be faceted along {111} planes, suggesting that the surface is smooth and well-ordered on an atomic scale and that an island growth mechanism is involved in the evolution of the BaF2 film.

scholarly journals Chemical Quantification of Atomic-Scale EDS Maps under Thin Specimen Conditions

2014 ◽  
Vol 20 (6) ◽  
pp. 1782-1790 ◽  
Author(s):  
Ping Lu ◽  
Eric Romero ◽  
Shinbuhm Lee ◽  
Judith L. MacManus-Driscoll ◽  
Quanxi Jia
Keyword(s):  
Atomic Scale ◽  
Specimen Thickness ◽  
Peak Width ◽  
Thin Specimen ◽  
Gaussian Peak ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
The Relationship ◽  
Chemical Quantification

AbstractWe report our effort to quantify atomic-scale chemical maps obtained by collecting energy-dispersive X-ray spectra (EDS) using scanning transmission electron microscopy (STEM) (STEM-EDS). With thin specimen conditions and localized EDS scattering potential, the X-ray counts from atomic columns can be properly counted by fitting Gaussian peaks at the atomic columns, and can then be used for site-by-site chemical quantification. The effects of specimen thickness and X-ray energy on the Gaussian peak width are investigated using SrTiO3 (STO) as a model specimen. The relationship between the peak width and spatial resolution of an EDS map is also studied. Furthermore, the method developed by this work is applied to study cation occupancy in a Sm-doped STO thin film and antiphase boundaries (APBs) present within the STO film. We find that Sm atoms occupy both Sr and Ti sites but preferably the Sr sites, and Sm atoms are relatively depleted at the APBs likely owing to the effect of strain.

Atomic-scale structural and compositional analyses of Ruddlesden-Popper planar faults in AO-excess SrTiO3 (A = Sr2+, Ca2+, Ba2+) ceramics

2009 ◽  
Vol 24 (8) ◽  
pp. 2596-2604 ◽  
Author(s):  
Sašo Šturm ◽  
Makoto Shiojiri ◽  
Miran Čeh
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Dark Field ◽  
Atomic Scale ◽  
Transmission Electron ◽  
Initial Stage ◽  
Final Microstructure ◽  
Scanning Transmission ◽  
The Matrix ◽  
Annular Dark Field

The microstructure in AO-excess SrTiO3 (A = Sr2+, Ca2+, Ba2+) ceramics is strongly affected by the formation of Ruddlesden-Popper fault–rich (RP fault) lamellae, which are coherently intergrown with the matrix of the perovskite grains. We studied the structure and chemistry of RP faults by applying quantitative high-resolution transmission electron microscopy and high-angle annular dark-field scanning transmission electron microscopy analyses. We showed that the Sr2+ and Ca2+ dopant ions form RP faults during the initial stage of sintering. The final microstructure showed preferentially grown RP fault lamellae embedded in the central part of the anisotropic perovskite grains. In contrast, the dopant Ba2+ ions preferably substituted for Sr2+ in the SrTiO3 matrix by forming a BaxSr1−xTiO3 solid solution. The surplus of Sr2+ ions was compensated structurally in the later stages of sintering by the formation of SrO-rich RP faults. The resulting microstructure showed RP fault lamellae located at the surface of equiaxed BaxSr1-xTiO3 perovskite grains.

scholarly journals Atomic-Scale Analysis of Chemical Bonding of Delaminated Graphene at Faceted SiC by Aberration-Corrected Scanning Transmission Electron Microscopy

2013 ◽  
Vol 19 (S2) ◽  
pp. 1238-1239
Author(s):  
G. Nicotra ◽  
Q.M. Ramasse ◽  
I. Deretzis ◽  
C. Bongiorno ◽  
C. Spinella ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Chemical Bonding ◽  
Scanning Transmission Electron Microscopy ◽  
Atomic Scale ◽  
Scale Analysis ◽  
Scanning Transmission Electron ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Aberration Corrected

Extended abstract of a paper presented at Microscopy and Microanalysis 2013 in Indianapolis, Indiana, USA, August 4 – August 8, 2013.

scholarly journals Atomic-scale microstructure of metal halide perovskite

Science ◽  
2020 ◽  
Vol 370 (6516) ◽  
pp. eabb5940 ◽  
Author(s):  
Mathias Uller Rothmann ◽  
Judy S. Kim ◽  
Juliane Borchert ◽  
Kilian B. Lohmann ◽  
Colum M. O’Leary ◽  
...  
Keyword(s):  
Scanning Transmission Electron Microscopy ◽  
Atomic Scale ◽  
Energy Applications ◽  
Transmission Electron ◽  
Metal Halide Perovskite ◽  
Scanning Transmission ◽  
Halide Perovskites ◽  
Crystalline Solar Cell ◽  
Lead Halide ◽  
Perovskite Lattice

Hybrid organic-inorganic perovskites have high potential as materials for solar energy applications, but their microscopic properties are still not well understood. Atomic-resolution scanning transmission electron microscopy has provided invaluable insights for many crystalline solar cell materials, and we used this method to successfully image formamidinium lead triiodide [CH(NH2)2PbI3] thin films with a low dose of electron irradiation. Such images reveal a highly ordered atomic arrangement of sharp grain boundaries and coherent perovskite/PbI2 interfaces, with a striking absence of long-range disorder in the crystal. We found that beam-induced degradation of the perovskite leads to an initial loss of formamidinium [CH(NH2)2+] ions, leaving behind a partially unoccupied perovskite lattice, which explains the unusual regenerative properties of these materials. We further observed aligned point defects and climb-dissociated dislocations. Our findings thus provide an atomic-level understanding of technologically important lead halide perovskites.

Sign in / Sign up

Export Citation Format

Share Document