scholarly journals Electro-optic spatial light modulator from an engineered organic layer

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Ileana-Cristina Benea-Chelmus ◽  
Maryna L. Meretska ◽  
Delwin L. Elder ◽  
Michele Tamagnone ◽  
Larry R. Dalton ◽  
...  

AbstractTailored nanostructures provide at-will control over the properties of light, with applications in imaging and spectroscopy. Active photonics can further open new avenues in remote monitoring, virtual or augmented reality and time-resolved sensing. Nanomaterials with χ(2) nonlinearities achieve highest switching speeds. Current demonstrations typically require a trade-off: they either rely on traditional χ(2) materials, which have low non-linearities, or on application-specific quantum well heterostructures that exhibit a high χ(2) in a narrow band. Here, we show that a thin film of organic electro-optic molecules JRD1 in polymethylmethacrylate combines desired merits for active free-space optics: broadband record-high nonlinearity (10-100 times higher than traditional materials at wavelengths 1100-1600 nm), a custom-tailored nonlinear tensor at the nanoscale, and engineered optical and electronic responses. We demonstrate a tuning of optical resonances by Δλ = 11 nm at DC voltages and a modulation of the transmitted intensity up to 40%, at speeds up to 50 MHz. We realize 2 × 2 single- and 1 × 5 multi-color spatial light modulators. We demonstrate their potential for imaging and remote sensing. The compatibility with compact laser diodes, the achieved millimeter size and the low power consumption are further key features for laser ranging or reconfigurable optics.

Photonics ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 62
Author(s):  
Remington S. Ketchum ◽  
Pierre-Alexandre Blanche

Micro-electro mechanical systems (MEMS)-based phase-only spatial light modulators (PLMs) have the potential to overcome the limited speed of liquid crystal on silicon (LCoS) spatial light modulators (SLMs) and operate at speeds faster than 10 kHz. This expands the practicality of PLMs to several applications, including communications, sensing, and high-speed displays. The complex structure and fabrication requirements for large, 2D MEMS arrays with vertical actuation have kept MEMS-based PLMs out of the market in favor of LCoS SLMs. Recently, Texas Instruments has adapted its existing DMD technology for fabricating MEMS-based PLMs. Here, we characterize the diffraction efficiency for one of these PLMs and examine the effect of a nonlinear distribution of addressable phase states across a range of wavelengths and illumination angles.


Science ◽  
2019 ◽  
Vol 364 (6445) ◽  
pp. 1087-1090 ◽  
Author(s):  
Shi-Qiang Li ◽  
Xuewu Xu ◽  
Rasna Maruthiyodan Veetil ◽  
Vytautas Valuckas ◽  
Ramón Paniagua-Domínguez ◽  
...  

Rapidly developing augmented reality, solid-state light detection and ranging (LIDAR), and holographic display technologies require spatial light modulators (SLMs) with high resolution and viewing angle to satisfy increasing customer demands. Performance of currently available SLMs is limited by their large pixel sizes on the order of several micrometers. Here, we propose a concept of tunable dielectric metasurfaces modulated by liquid crystal, which can provide abrupt phase change, thus enabling pixel-size miniaturization. We present a metasurface-based transmissive SLM, configured to generate active beam steering with >35% efficiency and a large beam deflection angle of 11°. The high resolution and steering angle obtained provide opportunities to develop the next generation of LIDAR and display technologies.


2019 ◽  
Vol 9 (10) ◽  
pp. 2012 ◽  
Author(s):  
Rujia Li ◽  
Liangcai Cao

Phase-only Spatial Light Modulator (SLM) is one of the most widely used devices for phase modulation. It has been successfully applied in the field with requirements of precision phase modulation such as holographic display, optical tweezers, lithography, etc. However, due to the limitations in the manufacturing process, the grayscale-phase response could be different for every single SLM device, even varying on sections of an SLM panel. A diverse array of calibration methods have been proposed and could be sorted into two categories: the interferometric phase calibration methods and the diffractive phase calibration methods. The principles of phase-only SLM are introduced. The main phase calibration methods are discussed and reviewed. The advantages of these methods are analyzed and compared. The potential methods for different applications are suggested.


1991 ◽  
Vol 219 ◽  
Author(s):  
Garret Moddel ◽  
Pierre R. Barbier

ABSTRACTA successful application for a-Si:H is as the photosensor in a liquid crystal optically addressed spatial light modulator (OASLM). We analyze the response time of an a-Si:H p-i-n photodiode in a “pseudo-OALSM,” in which the liquid crystal is replaced by an equivalent capacitor, under both forward and reverse bias. Under reverse bias the two important effects are the photocurrent response time, and residual trapped charge. Under forward bias the mechanism shifts from double injection regimes to ohmic transport as a function of voltage. We relate these characteristics to the operation of an OASLM.


1986 ◽  
Vol 74 ◽  
Author(s):  
T. H. Lin ◽  
M. L. Burgener ◽  
S. C. Esener ◽  
S. H. Lee

AbstractPLZT, a ferroelectric material with a high quadratic electro-optic coefficient, is combined with silicon technology via chemical vapor deposition to enable the realization of Si/PLZT spatial light modulators. Laser crystallization is required to produce device quality silicon deposited on PLZT. The critical issues in the laser crystallization are (i) achieving crystallization in the absence of a good seed, and (ii) preventing damage to the PLZT. To prevent PLZT damage during the laser heating, a 3.5 μm silicon dioxide layer is used as a thermal buffer between the silicon and the PLZT and the effective scanning time is shortened to 100 μs. A double humped cw argon ion laser with a shaped beam is used to achieve successful crystallization with good surface smoothness and large grain size. This technology and devices fabricated on these samples will be discussed.


2021 ◽  
Vol 9 ◽  
Author(s):  
Samira Aghayee ◽  
Mitchell Weikert ◽  
Phillip Alvarez ◽  
Gabriel A. Frank ◽  
Wolfgang Losert

For their capacity to shape optical wavefronts in real time into any desired illumination pattern, phase-only Spatial Light Modulators (SLM) have proven to be powerful tools for optical trapping and micromanipulation applications. SLMs are also becoming increasingly utilized in selective photo-stimulation of groups of neurons in the brain. However, conventional SLM based wavefront modulation introduces artifacts that are particularly detrimental for photo-stimulation applications. The primary issue is the unmodulated light that travels along the 0th order of diffraction. This portion of light is commonly blocked at the center of the object plane, which prevents photo-stimulation in the blocked region. We demonstrate a virtual lens configuration that moves the 1st order diffraction with the desired illumination pattern into the Fourier plane of the 0th order light. This virtual lens setup makes the whole field of view accessible for photo-stimulation and eliminates the need for removing the 0th order light in two-photon applications. Furthermore, in an example application to reconstruct a pattern consisting of an array of points, the virtual lens configuration increases the uniformity of the intensities these points. Moreover, diffraction-induced artifacts are also significantly reduced within the target plane. Therefore, our proposed high fidelity configuration yields target points with high signal to noise ratio.


2021 ◽  
Vol 54 (1) ◽  
Author(s):  
Lyubomir Stoyanov ◽  
Georgi Maleshkov ◽  
Ivan Stefanov ◽  
Gerhard G. Paulus ◽  
Alexander Dreischuh

AbstractOn-demand generation and reshaping of arrays of focused laser beams is highly desired in many areas of science and technology. In this work, we present a versatile approach for laser beam structuring in the focal plane of a lens by triple mixing of square and/or hexagonal optical vortex lattices (OVLs). In the artificial far field the input Gaussian beam is reshaped into ordered arrays of bright beams with flat phase profiles. This is remarkable, since the bright focal peaks are surrounded by hundreds of OVs with their dark cores and two-dimensional phase dislocations. Numerical simulations and experimental evidences for this are shown, including a broad discussion of some of the possible scenarios for such mixing: triple mixing of square-shaped OVLs, triple mixing of hexagonal OVLs, as well as the two combined cases of mixing square-hexagonal-hexagonal and square-square-hexagonal OVLs. The particular ordering of the input phase distributions of the OV lattices on the used spatial light modulators is found to affect the orientation of the structures ruled by the hexagonal OVL. Reliable control parameters for the creation of the desired focal beam structures are the respective lattice node spacings. The presented approach is flexible, easily realizable by using a single spatial light modulator, and thus accessible in many laboratories.


Crystals ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1047
Author(s):  
Yasuki Sakurai ◽  
Masashi Nishitateno ◽  
Masahiro Ito ◽  
Kohki Takatoh

Liquid-Crystal-On-Silicon (LCOS) Spatial Light Modulator (SLM) is widely used as a programmable adaptive optical element in many laser processing applications with various wavelength light sources. We report UV durable liquid-crystal-on-silicon spatial light modulators for one-shot laser material processing. Newly developed LCOS consists of UV transparent materials and shows a lifetime 480 times longer than the conventional one in 9.7 W/cm2 illumination at 355 nm. We investigated the durability of polymerization inhibitor mixed liquid crystal in order to extend its lifetime.


2000 ◽  
Author(s):  
Alexander Wolter ◽  
Detlef Kunze ◽  
Wolfgang Doleschal ◽  
Hubert Lakner ◽  
Günter Zimmer

Abstract Spatial light modulators (SLM) are electro-optical devices employed as optical pattern generators in applications like projection displays, direct-writing systems for photolithographic patterning, adaptive optics or optical signal processing. Here we report on the “moving liquid mirror” (MLM) as a new micromechanical actuator technology based on a deformable oil film on an aluminum mirror with electrode structure. The actuator is suitable for integration on a silicon backplane as CMOS-addressing circuit. Thus production in standard CMOS-technology is possible. A theoretical analysis of the device behavior is given, and the results of simulations are presented. Measurements on passive devices show good agreement with the simulations. Finally, active MLM-devices have been fabricated. Images can be programmed into the devices and observed under a microscope (figure 1).


Sign in / Sign up

Export Citation Format

Share Document