scholarly journals Immense variability in the sea surface temperature near macro tidal flat revealed by high-resolution satellite data (Landsat 8)

2022 ◽  
Vol 12 (1) ◽  
Author(s):  
Seung-Tae Lee ◽  
Yang-Ki Cho ◽  
Duk-jin Kim
Keyword(s):  
High Resolution ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Tidal Flat ◽  
Sea Water ◽  
Sea Surface ◽  
Landsat 8 ◽  
Open Sea ◽  
In Situ Observations

AbstractSea surface temperature (SST) is crucial for understanding the physical characteristics and ecosystems of coastal seas. SST varies near the tidal flat, where exposure and flood recur according to the tidal cycle. However, the variability of SST near the tidal flat is poorly understood owing to difficulties in making in-situ observations. The high resolution of Landsat 8 enabled us to determine the variability of SST near the macro tidal flat. The spatial distribution of the SST extracted from Landsat 8 changed drastically. The seasonal SST range was higher near the tidal flat than in the open sea. The maximum seasonal range of coastal SST exceeded 23 °C, whereas the range in the open ocean was approximately 18 °C. The minimum and maximum horizontal SST gradients near the tidal flat were approximately − 0.76 °C/10 km in December and 1.31 °C/10 km in June, respectively. The heating of sea water by tidal flats in spring and summer, and cooling in the fall and winter might result in a large horizontal SST gradient. The estimated heat flux from the tidal flat to the seawater based on the SST distribution shows seasonal change ranging from − 4.85 to 6.72 W/m2.

scholarly journals High resolution 3-D temperature and salinity fields derived from in situ and satellite observations

Ocean Science ◽  
2012 ◽  
Vol 8 (5) ◽  
pp. 845-857 ◽  
Author(s):  
S. Guinehut ◽  
A.-L. Dhomps ◽  
G. Larnicol ◽  
P.-Y. Le Traon
Keyword(s):  
High Resolution ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Large Scale ◽  
Sea Surface ◽  
Temperature Fields ◽  
Global Ocean ◽  
In Situ Observations ◽  
Temperature Observations

Abstract. This paper describes an observation-based approach that efficiently combines the main components of the global ocean observing system using statistical methods. Accurate but sparse in situ temperature and salinity profiles (mainly from Argo for the last 10 yr) are merged with the lower accuracy but high-resolution synthetic data derived from satellite altimeter and sea surface temperature observations to provide global 3-D temperature and salinity fields at high temporal and spatial resolution. The first step of the method consists in deriving synthetic temperature fields from altimeter and sea surface temperature observations, and salinity fields from altimeter observations, through multiple/simple linear regression methods. The second step of the method consists in combining the synthetic fields with in situ temperature and salinity profiles using an optimal interpolation method. Results show the revolutionary nature of the Argo observing system. Argo observations now allow a global description of the statistical relationships that exist between surface and subsurface fields needed for step 1 of the method, and can constrain the large-scale temperature and mainly salinity fields during step 2 of the method. Compared to the use of climatological estimates, results indicate that up to 50% of the variance of the temperature fields can be reconstructed from altimeter and sea surface temperature observations and a statistical method. For salinity, only about 20 to 30% of the signal can be reconstructed from altimeter observations, making the in situ observing system essential for salinity estimates. The in situ observations (step 2 of the method) further reduce the differences between the gridded products and the observations by up to 20% for the temperature field in the mixed layer, and the main contribution is for salinity and the near surface layer with an improvement up to 30%. Compared to estimates derived using in situ observations only, the merged fields provide a better reconstruction of the high resolution temperature and salinity fields. This also holds for the large-scale and low-frequency fields thanks to a better reduction of the aliasing due to the mesoscale variability. Contribution of the merged fields is then illustrated to describe qualitatively the temperature variability patterns for the period from 1993 to 2009.

scholarly journals High Resolution 3-D temperature and salinity fields derived from in situ and satellite observations

2012 ◽  
Vol 9 (2) ◽  
pp. 1313-1347 ◽  
Author(s):  
S. Guinehut ◽  
A.-L. Dhomps ◽  
G. Larnicol ◽  
P.-Y. Le Traon
Keyword(s):  
High Resolution ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Large Scale ◽  
Satellite Observations ◽  
Sea Surface ◽  
Temperature Fields ◽  
In Situ Observations ◽  
Temperature Observations

Abstract. This paper describes an observation-based approach that combines efficiently the main components of the global ocean observing system using statistical methods. Accurate but sparse in situ temperature and salinity profiles (mainly from Argo for the last 10 years) are merged with the lower accuracy but high-resolution synthetic data derived from altimeter and sea surface temperature satellite observations to provide global 3-D temperature and salinity fields at high temporal and spatial resolution. The first step of the method consists in deriving synthetic temperature fields from altimeter and sea surface temperature observations and salinity fields from altimeter observations through multiple/simple linear regression methods. The second step of the method consists in combining the synthetic fields with in situ temperature and salinity profiles using an optimal interpolation method. Results show the revolution of the Argo observing system. Argo observations now allow a global description of the statistical relationships that exist between surface and subsurface fields needed for step 1 of the method and can constrain the large-scale temperature and mainly salinity fields during step 2 of the method. Compared to the use of climatological estimates, results indicate that up to 50 % of the variance of the temperature fields can be reconstructed from altimeter and sea surface temperature observations and a statistical method. For salinity, only about 20 to 30 % of the signal can be reconstructed from altimeter observations, making the in situ observing system mandatory for salinity estimates. The in situ observations (step 2 of the method) reduce additionally the error by up to 20 % for the temperature field in the mixed layer and the main contribution is for salinity and the near surface layer with an improvement up to 30 %. Compared to estimates derived using in situ observations only, the merged fields provide a better reconstruction of the high resolution temperature and salinity fields. This also holds for the large-scale and low-frequency fields thanks to a better reduction of the aliasing due to the mesoscale variability. Contribution of the merged fields is then illustrated to qualitatively describe the temperature variability patterns for the 1993 to 2009 time period.

scholarly journals Validation of Sea Surface Temperature from GCOM-C Satellite Using iQuam Datasets and MUR-SST in Indonesian Waters

2021 ◽  
Vol 53 (1) ◽  
Author(s):  
Bambang Sukresno ◽  
Dinarika Jatisworo ◽  
Rizki Hanintyo
Keyword(s):  
High Resolution ◽  
Error Analysis ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Important Variable ◽  
Sea Surface ◽  
Analysis Method ◽  
Validation Process ◽  
Indonesian Seas

Sea surface temperature (SST) is an important variable in oceanography. One of the SST data can be obtained from the Global Observation Mission-Climate (GCOM-C) satellite. Therefore, this data needs to be validated before being applied in various fields. This study aimed to validate SST data from the GCOM-C satellite in the Indonesian Seas. Validation was performed using the data of Multi-sensor Ultra-high Resolution sea surface temperature (MUR-SST) and in situ sea surface temperature Quality Monitor (iQuam). The data used are the daily GCOM-C SST dataset from January to December 2018, as well as the daily dataset from MUR-SST and iQuam in the same period. The validation process was carried out using the three-way error analysis method. The results showed that the accuracy of the GCOM-C SST was 0.37oC.

scholarly journals RETRIEVAL OF SEA SURFACE TEMPERATURE OVER POTERAN ISLAND WATER OF INDONESIA WITH LANDSAT 8 TIRS IMAGE: A PRELIMINARY ALGORITHM

2015 ◽  
Vol XL-2/W4 ◽  
pp. 87-90 ◽  
Author(s):  
M. A. Syariz ◽  
L. M. Jaelani ◽  
L. Subehi ◽  
A. Pamungkas ◽  
E. S. Koenhardono ◽  
...  
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Brightness Temperature ◽  
Sea Surface ◽  
Coefficient Of Determination ◽  
Landsat 8 ◽  
In Situ Data ◽  
The North ◽  
Thermal Band

The Sea Surface Temperature (SST) retrieval from satellites data Thus, it could provide SST data for a long time. Since, the algorithms of SST estimation by using Landsat 8 Thermal Band are sitedependence, we need to develop an applicable algorithm in Indonesian water. The aim of this research was to develop SST algorithms in the North Java Island Water. The data used are in-situ data measured on April 22, 2015 and also estimated brightness temperature data from Landsat 8 Thermal Band Image (band 10 and band 11). The algorithm was established using 45 data by assessing the relation of measured in-situ data and estimated brightness temperature. Then, the algorithm was validated by using another 40 points. The results showed that the good performance of the sea surface temperature algorithm with coefficient of determination (<i>R</i><sup>2</sup>) and Root Mean Square Error (<i>RMSE</i>) of 0.912 and 0.028, respectively.

scholarly journals Validation of satellite-based sea surface temperature products against in situ observations off the western coast of Sumatra

2022 ◽  
Vol 12 (1) ◽  
Author(s):  
Qoosaku Moteki
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Sea Surface ◽  
Optimal Interpolation ◽  
Western Coast ◽  
Mean Square ◽  
Ensemble Spread ◽  
In Situ Observations ◽  
High Clouds

AbstractThis study validated the sea surface temperature (SST) datasets from the Group for High-Resolution SST Multi Product Ensemble (GMPE), National Oceanic and Atmospheric Administration (NOAA) Optimal Interpolation (OI) SST version 2 and 2.1 (OIv2 and OIv2.1), and Estimating the Circulation and Climate of the Ocean, Phase II (ECCO2) in the area off the western coast of Sumatra against in situ observations. Furthermore, the root mean square differences (RMSDs) of OIv2, OIv2.1, and ECCO2 were investigated with respect to GMPE, whose small RMSD < 0.2 K against in situ observations confirmed its suitability as a reference. Although OIv2 showed a large RMSD (1–1.5 K) with a significant negative bias, OIv2.1 (RMSD < 0.4 K) improved remarkably. In the average SST distributions for December 2017, the differences among the 4 datasets were significant in the areas off the western coast of Sumatra, along the southern coast of Java, and in the Indonesian inland sea. These results were consistent with the ensemble spread distribution obtained with GMPE. The large RMSDs of OIv2 corresponded to high clouds, and it was suggested that the change in the satellites used for SST estimation contributed to the improvement in OIv2.1.

scholarly journals Remote Sensing of Sea Surface Salinity: Comparison of Satellite and In Situ Observations and Impact of Retrieval Parameters

2019 ◽  
Vol 11 (7) ◽  
pp. 750 ◽  
Author(s):  
Emmanuel Dinnat ◽  
David Le Vine ◽  
Jacqueline Boutin ◽  
Thomas Meissner ◽  
Gary Lagerloef
Keyword(s):  
Dielectric Constant ◽  
Soil Moisture ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Sea Surface ◽  
Sea Surface Salinity ◽  
Surface Salinity ◽  
In Situ Observations ◽  
The Impact

Since 2009, three low frequency microwave sensors have been launched into space with the capability of global monitoring of sea surface salinity (SSS). The European Space Agency’s (ESA’s) Microwave Imaging Radiometer using Aperture Synthesis (MIRAS), onboard the Soil Moisture and Ocean Salinity mission (SMOS), and National Aeronautics and Space Administration’s (NASA’s) Aquarius and Soil Moisture Active Passive mission (SMAP) use L-band radiometry to measure SSS. There are notable differences in the instrumental approaches, as well as in the retrieval algorithms. We compare the salinity retrieved from these three spaceborne sensors to in situ observations from the Argo network of drifting floats, and we analyze some possible causes for the differences. We present comparisons of the long-term global spatial distribution, the temporal variability for a set of regions of interest and statistical distributions. We analyze some of the possible causes for the differences between the various satellite SSS products by reprocessing the retrievals from Aquarius brightness temperatures changing the model for the sea water dielectric constant and the ancillary product for the sea surface temperature. We quantify the impact of these changes on the differences in SSS between Aquarius and SMOS. We also identify the impact of the corrections for atmospheric effects recently modified in the Aquarius SSS retrievals. All three satellites exhibit SSS errors with a strong dependence on sea surface temperature, but this dependence varies significantly with the sensor. We show that these differences are first and foremost due to the dielectric constant model, then to atmospheric corrections and to a lesser extent to the ancillary product of the sea surface temperature.

scholarly journals Sea Surface Temperature Daytime Climate Analyses Derived from Aerosol Bias-Corrected Satellite Data

2006 ◽  
Vol 19 (3) ◽  
pp. 410-428 ◽  
Author(s):  
Nicholas R. Nalli ◽  
Richard W. Reynolds
Keyword(s):  
High Resolution ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Satellite Data ◽  
Bias Correction ◽  
Tropical Rainfall Measuring Mission ◽  
Stratospheric Aerosol ◽  
Sea Surface ◽  
Diurnal Warming

Abstract This paper describes daytime sea surface temperature (SST) climate analyses derived from 16 years (1985–2000) of reprocessed Advanced Very High Resolution Radiometer (AVHRR) Pathfinder Atmospheres (PATMOS) multichannel radiometric data. Two satellite bias correction methods are employed: the first being an aerosol correction, the second being an in situ correction of satellite biases. The aerosol bias correction is derived from observed statistical relationships between the slant-path aerosol optical depth and AVHRR multichannel SST (MCSST) depressions for elevated levels of tropospheric and stratospheric aerosol. Weekly analyses of SST are produced on a 1° equal-angle grid using optimum interpolation (OI) methodology. Four separate OI analyses are derived based on 1) MCSST without satellite bias correction, 2) MCSST with aerosol satellite bias correction, 3) MCSST with in situ correction of satellite biases, and 4) MCSST with both aerosol and in situ corrections of satellite biases. These analyses are compared against the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager OI SST, along with the extended reconstruction SST in situ analysis product. The OI analysis 1 exhibits significant negative and positive biases. Analysis 2, derived exclusively from satellite data, reduces globally the negative bias associated with elevated atmospheric aerosol, and subsequently reveals pronounced variations in diurnal warming consistent with recently published works. Analyses 3 and 4, derived from in situ correction of satellite biases, alleviate biases (positive and negative) associated with both aerosol and diurnal warming, and also reduce the dispersion. The PATMOS OISST 1985–2000 daytime climate analyses presented here provide a high-resolution (1° weekly) empirical database for studying seasonal and interannual climate processes.

scholarly journals RETRIEVING COASTAL SEA SURFACE TEMPERATURE FROM LANDSAT-8 TIRS FOR WANGI-WANGI ISLAND, WAKATOBI, SOUTHEAST SULAWESI, INDONESIA

2019 ◽  
Vol 16 (1) ◽  
pp. 13
Author(s):  
Eko Susilo ◽  
Rizki Hanintyo ◽  
Adi Wijaya
Keyword(s):  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Coastal Zone ◽  
Single Band ◽  
Sea Surface ◽  
Superior Performance ◽  
Landsat 8 ◽  
Infrared Sensors ◽  
In Situ Data

The new Landsat generation, Landsat-8, is equipped with two bands of thermal infrared sensors (TIRS). The presence of two bands provides for improved determination of sea surface temperature (SST) compared to existing products. Due to its high spatial resolution, it is suitable for coastal zone monitoring. However, there are still significant challenges in converting radiance measurements to SST, resulting from the limitations of in-situ measurements. Several studies into developing SST algorithms in Indonesia waters have provided good performance. Unfortunately, however, they have used a single-band windows approach, and a split-windows approach has yet to be reported. In this study, we investigate both single-band and split-window algorithms for retrieving SST maps in the coastal zone of Wangi-Wangi Island, Wakatobi, Southeast Sulawesi, Indonesia. Landsat-8 imagery was acquired on February 26, 2016 (01: 51: 44.14UTC) at position path 111 and and row 64. On the same day, in-situ SST was measured by using Portable Multiparameter Water Quality Checker – 24. We used the coefficient of correlation (r) and root mean square error (RMSE) to determine the best algorithm performance by incorporating in-situ data and the estimated SST map. The results showed that there were differences in brightness temperature retrieved from TIRS band10 and band 11. The single-band algorithm based on band 10 for Poteran Island clearly showed superior performance (r = 69.28% and RMSE = 0.7690°C). This study shows that the split-window algorithm has not yet produced a accurate result for the study area.

scholarly journals Validation of Landsat 8 high resolution Sea Surface Temperature using surfers

2021 ◽  
pp. 107650
Author(s):  
Quinten Vanhellemont ◽  
Robert J.W. Brewin ◽  
Philip J. Bresnahan ◽  
Tyler Cyronak
Keyword(s):  
High Resolution ◽  
Surface Temperature ◽  
Sea Surface Temperature ◽  
Sea Surface ◽  
Landsat 8
Sign in / Sign up

Export Citation Format

Share Document