A hybrid DFT based investigation of the photocatalytic activity of cation–anion codoped SrTiO3 for water splitting under visible light

2014 ◽  
Vol 16 (44) ◽  
pp. 24527-24535 ◽  
Author(s):  
Brindaban Modak ◽  
K. Srinivasu ◽  
Swapan K. Ghosh

The effect of cation (Mo or W) and anion (N) codoping in different proportion has been explored to improve the photocatalytic activity of SrTiO3 under visible light. Codoping in 1 : 2 ratio has been found to be more effective due to reduction in band gap without introducing local trapping center and also for maintaining appropriate band alignment.

2006 ◽  
Vol 78 (12) ◽  
pp. 2267-2276 ◽  
Author(s):  
Kazuhiko Maeda ◽  
Kentaro Teramura ◽  
Nobuo Saito ◽  
Yasunobu Inoue ◽  
Hisayoshi Kobayashi ◽  
...  

Oxynitride photocatalysts with d10 electronic configuration are presented as effective non-oxide catalysts for overall water splitting. Germanium nitride (β-Ge3N4) having a band gap of 3.8-3.9 eV modified with RuO2 nanoparticles as a cocatalyst is shown to achieve stoichiometric decomposition of H2O into H2 and O2 under UV irradiation (λ > 200 nm). A novel solid solution of GaN and ZnO, (Ga1-xZnx)(N1-xOx), with a band gap of 2.4-2.8 eV (depending on composition) achieves overall water splitting under visible light (λ > 400 nm) when loaded with an appropriate cocatalyst. The narrower band gap of the solid solution is attributed to the bonding between Zn and N atoms at the top of the valence band. The photocatalytic activity of (Ga1-xZnx)(N1-xOx) for overall water splitting is strongly dependent on both the cocatalyst and the crystallinity and composition of the material. The quantum efficiency of (Ga1-xZnx)(N1-xOx) with Rh and Cr mixed-oxide nanoparticles is 2-3 % at 420-440 nm, which is the highest reported efficiency for overall water splitting in the visible-light region.


2020 ◽  
Vol 22 (42) ◽  
pp. 24662-24668
Author(s):  
Wei Zhang ◽  
Weixiao Ji

The superior visible-light photocatalytic activity and type-II band alignment with built-in electric field make CdO/PtSe2 a promising candidate for water-splitting.


RSC Advances ◽  
2016 ◽  
Vol 6 (93) ◽  
pp. 90188-90196 ◽  
Author(s):  
Brindaban Modak ◽  
Pampa Modak ◽  
Swapan K. Ghosh

The unique characteristics of the (W, N) dopant pair is that it reduces the band gap of NaNbO3 mainly by elevation of valence band maxima, which is very much crucial for photocatalyst for hydrogen evolution through water splitting.


Author(s):  
David Maria Tobaldi ◽  
Luc Lajaunie ◽  
ana caetano ◽  
nejc rozman ◽  
Maria Paula Seabra ◽  
...  

<div>Titanium dioxide is by far the most utilised semiconductor material for photocatalytic applications. Still, it is transparent to visible-light. Recently, it has been proved that a type-II band alignment for the rutile−anatase mixture would improve its visible-light absorption.</div><div>In this research paper we thoroughly characterised the real crystalline and amorphous phases of synthesised titanias – thermally treated at different temperatures to get distinct ratios of anatase-rutile-amorphous fraction – as well as that of three commercially available photocatalytic nano-TiO2. </div><div>The structural characterisation was done via advanced X-ray diffraction method, namely the Rietveld-RIR method, to attain a full quantitative phase analysis of the specimens. The microstructure was also investigated via an advanced X-ray method, the whole powder pattern modelling. These methods were validated combining advanced aberration-corrected scanning transmission microscopy and high-resolution electron energy-loss spectroscopy. The photocatalytic activity was assessed in the liquid- and gas-solid phase (employing rhodamine B and 4-chlorophenol, and isopropanol, respectively, as the organic substances to degrade) using a light source irradiating exclusively in the visible-range.</div><div>Optical spectroscopy showed that even a small fraction of rutile (2 wt%) is able to shift to lower energies the apparent optical band gap of an anatase-rutile mixed phase. But is this enough to attain a real photocatalytic activity promoted by merely visible-light?</div><div>We tried to give a reply to that question.</div><div>Photocatalytic activity results in the liquid-solid phase showed that a high surface hydroxylation led to specimen with superior visible light-induced catalytic activity (i.e. dye and ligand-to-metal charge transfer complexes sensitisation effects). That is: not photocatalysis <i>sensu-strictu</i>.</div><div>On the other hand, the gas-solid phase results showed that a higher amount of the rutile fraction (around 10 wt%), together with less recombination of the charge carriers, were more effective for an actual photocatalytic oxidation of isopropanol.</div>


2021 ◽  
pp. 104605
Author(s):  
Qingyi Feng ◽  
Hongxiang Deng ◽  
Hongdong Yang ◽  
Shasha Ke ◽  
Haifeng Lv ◽  
...  

2015 ◽  
Vol 3 (36) ◽  
pp. 18622-18635 ◽  
Author(s):  
Susanginee Nayak ◽  
Lagnamayee Mohapatra ◽  
Kulamani Parida

Dispersion of exfoliated CN over the surface of exfoliated LDH composite materials, and its photocatalytic water splitting under visible-light irradiation.


2018 ◽  
Vol 32 (17) ◽  
pp. 1850185 ◽  
Author(s):  
Yun-Hui Si ◽  
Yu Xia ◽  
Ya-Yun Li ◽  
Shao-Ke Shang ◽  
Xin-Bo Xiong ◽  
...  

A series of BiFeO3 and BiFe[Formula: see text]Mn[Formula: see text]O3 (x = 0, 0.02, 0.04, 0.06, 0.08, 0.10) were synthesized by a hydrothermal method. The samples were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy (EDS) and UV–Vis diffuse reflectance spectroscopy, and their photocatalytic activity was studied by photocatalytic degradation of methylene blue in aqueous solution under visible light irradiation. The band gap of BiFeO3 was significantly decreased from 2.26 eV to 1.90 eV with the doping of Mn. Furthermore, the 6% Mn-doped BiFeO3 photocatalyst exhibited the best activity with a degradation rate of 94% after irradiation for 100 min. The enhanced photocatalytic activity with Mn doping could be attributed to the enhanced optical absorption, increment of surface reactive sites and reduction of electron–hole recombination. Our results may be conducive to design more efficient photocatalysts responsive to visible light among narrow band gap semiconductors.


2017 ◽  
Vol 19 (36) ◽  
pp. 24915-24927 ◽  
Author(s):  
A. H. Reshak

The amalgamation of a wide optical band gap photocatalyst with visible-light-active CdO quantum dots (QDs) as sensitizers is one of the most efficient ways to improve photocatalytic performance under visible light irradiation.


2022 ◽  
Author(s):  
Brindaban Modak

Photocatalytic water splitting using sunlight is one of the most promising approaches to produce hydrogen, for which an increasing focus has been directed towards band gap engineering of the existing...


Sign in / Sign up

Export Citation Format

Share Document