Enhanced visible-active photocatalytic behaviors observed in Mn-doped BiFeO3

2018 ◽  
Vol 32 (17) ◽  
pp. 1850185 ◽  
Author(s):  
Yun-Hui Si ◽  
Yu Xia ◽  
Ya-Yun Li ◽  
Shao-Ke Shang ◽  
Xin-Bo Xiong ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Band Gap ◽  
Diffuse Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
Electron Hole ◽  
X Ray ◽  
Mn Doped ◽  
Hole Recombination ◽  
Narrow Band Gap Semiconductors

A series of BiFeO3 and BiFe[Formula: see text]Mn[Formula: see text]O3 (x = 0, 0.02, 0.04, 0.06, 0.08, 0.10) were synthesized by a hydrothermal method. The samples were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy (EDS) and UV–Vis diffuse reflectance spectroscopy, and their photocatalytic activity was studied by photocatalytic degradation of methylene blue in aqueous solution under visible light irradiation. The band gap of BiFeO3 was significantly decreased from 2.26 eV to 1.90 eV with the doping of Mn. Furthermore, the 6% Mn-doped BiFeO3 photocatalyst exhibited the best activity with a degradation rate of 94% after irradiation for 100 min. The enhanced photocatalytic activity with Mn doping could be attributed to the enhanced optical absorption, increment of surface reactive sites and reduction of electron–hole recombination. Our results may be conducive to design more efficient photocatalysts responsive to visible light among narrow band gap semiconductors.

Few-Layered MoS2 Nanostructures for Highly Efficient Visible Light Photocatalysis

NANO ◽  
2016 ◽  
Vol 11 (10) ◽  
pp. 1650114 ◽  
Author(s):  
Dan Li ◽  
Jianwei Li ◽  
Caiqin Han ◽  
Xinsheng Zhao ◽  
Haipeng Chu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Electrochemical Impedance ◽  
X Ray Diffraction ◽  
Electron Hole ◽  
Electrochemical Impedance Spectra ◽  
X Ray ◽  
Transmission Electron ◽  
Electron Hole Pair

Few-layered MoS2 nanostructures were successfully synthesized by a simple hydrothermal method without the addition of any catalysts or surfactants. Their morphology, structure and photocatalytic activity were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, electrochemical impedance spectra and UV-Vis absorption spectroscopy, respectively. These results show that the MoS2 nanostructures synthesized at 180[Formula: see text]C exhibit an optimal visible light photocatalytic activity (99%) in the degradation of Rhodamine B owing to the relatively easier adsorption of pollutants, higher visible light absorption and lower electron–hole pair recombination.

Visible-Light-Induced Photocatalytic Activity of Boron-Doped BiVO4

2014 ◽  
Vol 809-810 ◽  
pp. 890-894
Author(s):  
Dan Li ◽  
Lian Wei Shan ◽  
Gui Lin Wang ◽  
Li Min Dong ◽  
Wei Li ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
Reflectance Spectroscopy ◽  
Scheelite Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Boron Doped

Boron-BiVO4 samples were synthesized by sol-gel method. They were characterized by UV-vis diffuse reflectance spectroscopy, X-ray diffraction. Photocatalytic activity of the obtained BiVO4 samples was investigated through degrading methylene blue (MB). The results reveal that boron-BiVO4 catalysts have monoclinic scheelite structure. The BiVO4 and Co-BiVO4 photocatalysts were responsive to visible light. Co-BiVO4 photocatalyst showed higher photocatalytic activity than pure BiVO4, resulting in the significantly improved efficiency of degradation of MB.

CeO2/TiO2 Nanotubes Composites: Synthesis, Characterization, and Photocatalytic Properties

2012 ◽  
Vol 583 ◽  
pp. 86-90 ◽  
Author(s):  
Hai Bin Li ◽  
Xin Yong Li ◽  
Yan De Song ◽  
Shu Guang Chen ◽  
Ying Wang ◽  
...  
Keyword(s):  
Diffuse Reflectance Spectroscopy ◽  
Atomic Ratio ◽  
X Ray Diffraction ◽  
Hydrothermal Route ◽  
Electron Hole ◽  
Calcination Process ◽  
X Ray ◽  
Transmission Electron ◽  
Hole Recombination

TiO2nanotubes were prepared via a hydrothermal route. CeO2nanoparticles with diameters around 5nm were loaded onto the surface of TiO2nanotubes via a deposition approach followed by a calcination process. Transmission electron microscopy (TEM), X-ray diffraction (XRD), and UV-vis diffuse reflectance spectroscopy (UV-vis) were applied for the characterization of the as-prepared CeO2/TiO2nanotubes composites. The results show that CeO2particles are highly dispersed on the surface of TiO2nanotubes. The TiO2 nanotubes are modified to response to the visible light due to the combination with CeO2. The CeO2/TiO2nanotubes composites with a CeO2/TiO2atomic ratio of 2.5% show a further improvement on the photocatalytic activity for degradation of Rhodamine B in water. The presence of CeO2improves the light absorption of TiO2nanotubes and inhibits the electron-hole recombination.

scholarly journals Synthesis and photocatalytic activity of ZnO/CuO composite for the degradation of methyl blue under vilsible light iradiation

2020 ◽  
Vol 9 (3) ◽  
pp. 94-100
Author(s):  
Kim Nguyen Van ◽  
Nga Nguyen Thi Viet ◽  
Tuyen Vo Thi Thanh ◽  
Vien Vo
Keyword(s):  
Photocatalytic Activity ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
Photogenerated Electron ◽  
Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
Electron Hole ◽  
X Ray ◽  
Microwave System ◽  
Direct Formation

Composite ZnO/CuO was prepared by direct formation of ZnO from Zn(OOCCH3)2 precursor in the presence of CuO with the assistant of the microwave system. The obtained composite was characterized by X-Ray Diffraction (XRD) and Ultraviolet–Visible Diffuse Reflectance Spectroscopy (UV-vis DRS), which shows that the composite with a bandgap of 3.27 eV contains two components, ZnO and CuO. The photocatalytic activity of ZnO/CuO was assessed by the degradation of methylene blue (MB) in water under visible light, shows that the photocatalytic activity for the ZnO/CuO composite was remarkably improved compared to single ZnO and CuO. This result is attributed to the reduced recombination rate of photogenerated electron-hole pairs by the presence of CuO in the composite, therefore photocatalysis activity increases.

scholarly journals Improved Visible Light Photocatalytic Activity for TiO2Nanomaterials by Codoping with Zinc and Sulfur

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Qianzhi Xu ◽  
Xiuying Wang ◽  
Xiaoli Dong ◽  
Chun Ma ◽  
Xiufang Zhang ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Sunlight Irradiation ◽  
X Ray ◽  
Transmission Electron ◽  
Photoinduced Charge

S/Zn codoped TiO2nanomaterials were synthesized by a sol-gel method. X-ray diffraction, UV-vis diffuse reflectance spectroscopy, transmission electron microscopy, photoluminescence spectroscopy, and X-ray photoelectron spectroscopy were used to characterize the morphology, structure, and optical properties of the prepared samples. The introduction of Zn and S resulted in significant red shift of absorption edge for TiO2-based nanomaterials. The photocatalytic activity was evaluated by degrading reactive brilliant red X-3B solution under simulated sunlight irradiation. The results showed S/Zn codoped TiO2exhibited higher photocatalytic activity than pure TiO2and commercial P25, due to the photosynergistic effect of obvious visible light absorption, efficient separation of photoinduced charge carriers, and large surface area. Moreover, the content of Zn and S in the composites played important roles in photocatalytic activity of TiO2-based nanomaterials.

scholarly journals The Effect of the Reducing Sugars in the Synthesis of Visible-Light-Active Copper(I) Oxide Photocatalyst

Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 1149
Author(s):  
Szilvia Fodor ◽  
Lucian Baia ◽  
Kornélia Baán ◽  
Gábor Kovács ◽  
Zsolt Pap ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Diffuse Reflectance Spectroscopy ◽  
Structural Characteristics ◽  
Reducing Agent ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
Methyl Orange Degradation ◽  
X Ray ◽  
Visible Light Active

In the present work, shape tailored Cu2O microparticles were synthesized by changing the nature of the reducing agent and studied subsequently. d-(+)-glucose, d-(+)-fructose, d-(+)xylose, d-(+)-galactose, and d-(+)-arabinose were chosen as reducing agents due to their different reducing abilities. The morpho-structural characteristics were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), and diffuse reflectance spectroscopy (DRS), while their photocatalytic activity was evaluated by methyl orange degradation under visible light (120 min). The results show that the number of carbon atoms in the sugars affect the morphology and particle size (from 250 nm to 1.2 µm), and differences in their degree of crystallinity and photocatalytic activity were also found. The highest activity was observed when glucose was used as the reducing agent.

scholarly journals Silver/Carbon Codoped Titanium Dioxide Photocatalyst for Improved Dye Degradation under Visible Light

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
P. Nyamukamba ◽  
L. Tichagwa ◽  
S. Mamphweli ◽  
L. Petrik
Keyword(s):  
Visible Light ◽  
Band Gap ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
Dye Degradation ◽  
Rutile Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hydrolysis Of

Herein, we report the synthesis of quartz supported TiO2 photocatalysts codoped with carbon and silver through the hydrolysis of titanium tetrachloride followed by calcination at 500°C. The prepared samples were characterized by UV-Vis diffuse reflectance spectroscopy, high resolution scanning electron microscopy (HRSEM), Raman spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). Codoping of TiO2 with Ag and carbon resulted in an increase in the surface area of the photocatalyst and altered the ratio of the anatase to rutile phase. The absorption edge of all the doped TiO2 photocatalysts redshifted and the band gap was reduced. The lowest band gap of 1.95 eV was achieved by doping with 0.5% Ag. Doping TiO2 using carbon as the only dopant resulted in a quartz supported photocatalyst that showed greater photocatalytic activity towards methyl orange than undoped TiO2 and also all codoped TiO2 photocatalysts under visible light irradiation.

Characterization and Visible-Light Photocatalytic Activity of Nano-Bi2MoO6 Catalysts Prepared by Hydrothermal Process

2011 ◽  
Vol 117-119 ◽  
pp. 803-806
Author(s):  
Pei Song Tang ◽  
Hai Feng Chen ◽  
Feng Cao ◽  
Guo Xiang Pan ◽  
Min Hong Xu
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Diffuse Reflectance Spectroscopy ◽  
Hydrothermal Process ◽  
X Ray Diffraction ◽  
X Ray ◽  
Visible Light Photocatalytic Activity ◽  
Degussa P25 ◽  
Uv Visible ◽  
Visible Light Photocatalytic

The Nano-Bi2MoO6was prepared using Bi(NO3)3•5H2O and Na2MoO4•2H2O as starting materials by a hydrothermal process. The prepared Bi2MoO6product was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV-visible diffuse reflectance spectroscopy (DRS). It was found that the prepared nano-Bi2MoO6show narrow band gap of 2.88 eV. Consequently, the prepared nano-Bi2MoO6show high visible-light photocatalytic activity for decomposition of Rhodamine B in comparison with the commercial Degussa P25, which was ascribed to the visible-light absorption.

scholarly journals Cu-doped TiO2 brookite photocatalyst with enhanced visible light photocatalytic activity

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Yunling Zou ◽  
Xianshou Huang ◽  
Tao Yu ◽  
Xiaoqiang Tong ◽  
Yan Li ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Diffuse Reflectance ◽  
Diffuse Reflectance Spectroscopy ◽  
Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Visible Light Photocatalytic Activity ◽  
Visible Light Photocatalytic

Abstract Cu-doped TiO2 having a brookite phase and showing enhanced visible light photocatalytic activity was synthesized using a mild solvothermal method. The as-prepared samples were characterized by various techniques, such as X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, UV-Vis diffuse reflectance spectroscopy. Photocatalytic activity of Cu-doped brookite TiO2 nanoparticles was evaluated by photodegradation of methylene blue under visible light irradiation. The X-ray diffraction analysis showed that the crystallite size of Cu-doped brookite TiO2 samples decreased with the increase of Cu concentration in the samples. The UV-Vis diffuse reflectance spectroscopy analysis of the Cu-doped TiO2 samples showed a shift to lower energy levels in the band gap compared with that of bare phase brookite TiO2. Cu doped brookite TiO2 can obviously improve its visible light photocatalytic activity because of Cu ions acting as electron acceptors and inhibiting electron-hole recombination. The brookite TiO2 sample with 7.0 wt.% Cu showed the highest photocatalytic activity and the corresponding degradation rate of MB (10 mg/L) reached to 87 % after visible light illumination for 120 min, much higher than that of bare brookite TiO2 prepared under the same conditions (78 %).

scholarly journals Photodegradation of Methyl Orange Using Magnetically Recoverable AgBr@Ag3PO4/Fe3O4Photocatalyst under Visible Light

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Zhen Wang ◽  
Lu Yin ◽  
Ziwen Chen ◽  
Guowang Zhou ◽  
Huixiang Shi
Keyword(s):  
Photocatalytic Activity ◽  
Methyl Orange ◽  
Visible Light ◽  
High Performance ◽  
Diffuse Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
Electron Hole ◽  
Transmission Electron ◽  
Activity Enhancement ◽  
Matching Band

A novel magnetically recoverable AgBr@Ag3PO4/Fe3O4hybrid was prepared by a simple deposition-precipitation approach and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and UV-Vis diffuse reflectance spectroscopy (DRS). The results revealed that the photocatalytic activity and stability of AgBr@Ag3PO4/Fe3O4composite toward decomposition of methyl orange (MO) dye were superior to those of pure Ag3PO4under visible light irradiation. The photocatalytic activity enhancement of AgBr@Ag3PO4/Fe3O4is closely related to the efficient separation of electron-hole pairs derived from the matching band potentials between Ag3PO4and AgBr, as well as the good conductivity of Fe3O4. Moreover, the photocatalyst could be easily separated by applying an external magnetic field due to its magnetic property. The quenching effects of different scavengers proved that active h+and played the major role for the MO degradation. This work would provide new insight for the construction of visible light responsible photocatalysts with high performance, good stability, and recoverability.

Sign in / Sign up

Export Citation Format

Share Document