Enhanced thermal conductivity for polyimide composites with a three-dimensional silicon carbide nanowire@graphene sheets filler

2015 ◽  
Vol 3 (9) ◽  
pp. 4884-4891 ◽  
Author(s):  
Wen Dai ◽  
Jinhong Yu ◽  
Yi Wang ◽  
Yingze Song ◽  
Fakhr E. Alam ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Silicon Carbide ◽  
Three Dimensional ◽  
Graphene Sheets ◽  
Polyimide Composites ◽  
Polyimide Matrix ◽  
Enhanced Thermal Conductivity

3DSG incorporated into a polyimide matrix greatly enhanced its thermal conductivity (up to 2.63 W m−1 K−1), approximately a 10-fold enhancement in comparison with that of neat polyimide.

Constructing Three-dimensional Nano-crystalline Diamond Network within Polymer Composites for Enhanced Thermal Conductivity

Nanoscale ◽  
2021 ◽  
Author(s):  
Shaoyang Xiong ◽  
Yue Qin ◽  
Linhong Li ◽  
Guoyong Yang ◽  
Maohua Li ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Polymer Composites ◽  
Thermal Performance ◽  
Thermal Transport ◽  
High Performance ◽  
Rapid Development ◽  
Electronic Devices ◽  
Three Dimensional ◽  
Nano Crystalline ◽  
Enhanced Thermal Conductivity

In order to meet the requirement of thermal performance with the rapid development of high-performance electronic devices, constructing a three-dimensional thermal transport skeleton is an effective method for enhancing thermal...

Greatly enhanced thermal conductivity of polyimide composites by polydopamine modification and the 2D-aligned structure

2020 ◽  
Vol 46 (18) ◽  
pp. 28363-28372
Author(s):  
Dongliang Ding ◽  
Zhihui Shang ◽  
Xu Zhang ◽  
Xingfeng Lei ◽  
Zhenguo Liu ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Polyimide Composites ◽  
Enhanced Thermal Conductivity

Zinc Composites With Enhanced Thermal Conductivity for Use in Fused Deposition Modeling Systems

2017 ◽  
Author(s):  
Tyler J. Sonsalla ◽  
Leland Weiss ◽  
Arden Moore ◽  
Adarsh Radadia ◽  
Debbie Wood ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Fused Deposition Modeling ◽  
Waste Heat ◽  
Conductive Polymer ◽  
Three Dimensional ◽  
Sem Images ◽  
Fused Deposition ◽  
Thermally Conductive ◽  
Deposition Modeling ◽  
Enhanced Thermal Conductivity

Waste heat is a major energy loss in manufacturing facilities. Thermally conductive polymer composite heat exchangers could be utilized in the ultralow temperature range (below 200° C) for waste heat recovery. Fused deposition modeling (FDM), also known as three-dimensional (3-D) printing, has become an increasingly popular technology and presents one approach to fabrication of these exchangers. The primary challenge to the use of FDM is the low-conductivity of the materials themselves. This paper presents a study of a new polymer-Zn composite designed for enhanced thermal conductivity for usage in FDM systems. Thermal properties were assessed in addition to basic printability. Filler volume percentages were varied to study the effects on material properties. Scanning electron microscope (SEM) images were taken of the 3-D printed test pieces to determine filler orientation and filler distribution. Lastly, experimentally obtained thermal conductivity values were compared to the theoretical thermal conductivity values predicted from the Lewis-Nielsen model.

scholarly journals Vertically Aligned and Interconnected Graphite and Graphene Oxide Networks Leading to Enhanced Thermal Conductivity of Polymer Composites

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1121 ◽  
Author(s):  
Ziming Wang ◽  
Yiyang Cao ◽  
Decai Pan ◽  
Sen Hu
Keyword(s):  
Thermal Conductivity ◽  
Graphene Oxide ◽  
High Performance ◽  
Three Dimensional ◽  
Freezing Temperature ◽  
Thermal Interface Materials ◽  
Vertically Aligned ◽  
Conductive Property ◽  
Efficient Heat Transfer ◽  
Enhanced Thermal Conductivity

Natural graphite flakes possess high theoretical thermal conductivity and can notably enhance the thermal conductive property of polymeric composites. Currently, because of weak interaction between graphite flakes, it is hard to construct a three-dimensional graphite network to achieve efficient heat transfer channels. In this study, vertically aligned and interconnected graphite skeletons were prepared with graphene oxide serving as bridge and support via freeze-casting method. Three freezing temperatures were utilized, and the resulting graphite and graphene oxide network was filled in a polymeric matrix. Benefiting from the ultralow freezing temperature of −196 °C, the network and its composite occupied a more uniform and denser structure, which lead to enhanced thermal conductivity (2.15 W m−1 K−1) with high enhancement efficiency and prominent mechanical properties. It can be significantly attributed to the well oriented graphite and graphene oxide bridges between graphite flakes. This simple and effective strategy may bring opportunities to develop high-performance thermal interface materials with great potential.

Flexible h-BN foam sheets for multifunctional electronic packaging materials with ultrahigh thermostability

Soft Matter ◽  
2018 ◽  
Vol 14 (20) ◽  
pp. 4204-4212 ◽  
Author(s):  
Deul Kim ◽  
Artavazd Kirakosyan ◽  
Jae Woong Lee ◽  
Jong-Ryul Jeong ◽  
Jihoon Choi
Keyword(s):  
Thermal Conductivity ◽  
High Temperature ◽  
Network Structure ◽  
Electronic Packaging ◽  
Three Dimensional ◽  
Packaging Materials ◽  
Dimensional Network ◽  
Thermo Stability ◽  
Enhanced Thermal Conductivity

Flexible and robust h-BN foam sheets with a three-dimensional network structure exhibit a much enhanced thermal conductivity as well as thermo-stability at high temperature.

Sign in / Sign up

Export Citation Format

Share Document