Facile method for the synthesis of a magnetic CNTs–C@Fe–chitosan composite and its application in tetracycline removal from aqueous solutions

2015 ◽  
Vol 17 (24) ◽  
pp. 15936-15944 ◽  
Author(s):  
Jie Ma ◽  
Yuan Zhuang ◽  
Fei Yu
Keyword(s):  
Carbon Nanotubes ◽  
Aqueous Solutions ◽  
New Type ◽  
Chitosan Composite

A new type of biocomposite, as-prepared carbon nanotubes–chitosan (APCNTs–CS), was prepared and characterized.

Boehmite Nanofibers as a Dispersant for Nanotubes in an Aqueous Sol

2018 ◽  
Author(s):  
Gen Hayase
Keyword(s):  
Carbon Nanotubes ◽  
Aspect Ratio ◽  
Aqueous Solutions ◽  
High Aspect Ratio ◽  
Multiwall Carbon Nanotubes ◽  
Multiwall Carbon ◽  
Nanotube Films

By exploiting the dispersibility and rigidity of boehmite nanofibers (BNFs) with a high aspect ratio of 4 nm in diameter and several micrometers in length, multiwall-carbon nanotubes (MWCNTs) were successfully dispersed in aqueous solutions. In these sols, the MWCNTs were dispersed at a ratio of about 5–8% relative to BNFs. Self-standing BNF–nanotube films were also obtained by filtering these dispersions and showing their functionality. These films can be expected to be applied to sensing materials.

Sorption of Bisphenol A in Aqueous Solutions on Irradiated and as-Grown Multiwalled Carbon Nanotubes

2018 ◽  
Vol 69 (5) ◽  
pp. 1233-1239
Author(s):  
Raluca Madalina Senin ◽  
Ion Ion ◽  
Ovidiu Oprea ◽  
Rusandica Stoica ◽  
Rodica Ganea ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Bisphenol A ◽  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Multiwalled Carbon Nanotubes ◽  
Adsorption Process ◽  
Sorption Process ◽  
Multiwalled Carbon ◽  
Before And After ◽  
Kinetic Sorption

In this study, non-irradiated and weathered multiwalled carbon nanotubes (MWCNTs) obtained through irradiation, were studied as adsorbents for BPA, both nanomaterials being characterized before and after the adsorption process. The objectives of our investigation were to compare the characteristics of non-irradiated and irradiated MWCNTs, to evaluate the adsorption capacity of BPA by pristine and irradiated MWCNTs and to determine the variation of the kinetic, sorption and thermodynamic parameters during sorption process using both sorbents.

Carbon Nanotube Gas Sensor Fabricated on Anodic Aluminum Oxide

2007 ◽  
Vol 124-126 ◽  
pp. 1309-1312
Author(s):  
Nguyen Duc Hoa ◽  
Nguyen Van Quy ◽  
Gyu Seok Choi ◽  
You Suk Cho ◽  
Se Young Jeong ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Gas Sensor ◽  
Chemical Vapor ◽  
Fast Response ◽  
Device Fabrication ◽  
Alumina Oxide ◽  
Response And Recovery ◽  
New Type ◽  
P Type

A new type of gas sensor was realized by directly depositing carbon nanotube on nano channels of the anodic alumina oxide (AAO) fabricated on p-type silicon substrate. The carbon nanotubes were synthesized by thermal chemical vapor deposition at a very high temperature of 1200 oC to improve the crystallinity. The device fabrication process was also developed. The contact of carbon nanotubes and p-type Si substrate showed a Schottky behavior, and the Schottky barrier height increased with exposure to gases while the overall conductivity decreased. The sensors showed fast response and recovery to ammonia gas upon the filling (400 mTorr) and evacuation.

Facile Fabrication of Novel Magnetic ZIF-67 MOF@Aminated Chitosan Composite Beads for the Adsorptive Removal of Cr(VI) from Aqueous Solutions

2021 ◽  
pp. 118084
Author(s):  
Ahmed M. Omer ◽  
Eman M. Abd El-Monaem ◽  
Mona M. Abd El-Latif ◽  
Gehan M. El-Subruiti ◽  
Abdelazeem S. Eltaweil
Keyword(s):  
Aqueous Solutions ◽  
Adsorptive Removal ◽  
Composite Beads ◽  
Facile Fabrication ◽  
Chitosan Composite

Kinetics and thermodynamics of the sorption of furaltadone from aqueous solutions on magnetic multi-walled carbon nanotubes

2014 ◽  
Vol 70 (6) ◽  
pp. 964-971
Author(s):  
Xu Chen ◽  
Zhen-hu Xiong
Keyword(s):  
Carbon Nanotubes ◽  
Aqueous Solutions ◽  
Sorption Data ◽  
Multi Wall Carbon Nanotubes ◽  
Adsorption Behaviors ◽  
Different Temperatures ◽  
Multi Walled Carbon Nanotubes ◽  
Pseudo Second Order ◽  
Experimental Data Analysis ◽  
Walled Carbon Nanotubes

Magnetic multi-wall carbon nanotubes (M-MWCNTs) were used as an adsorbent for removal of furaltadone from aqueous solutions, and the adsorption behaviors were investigated by varying pH, sorbent amount, sorption time and temperature. The results showed that the adsorption efficiency of furaltadone reached 97% when the dosage of M-MWCNT was 0.45 g · L−1, the pH was 7 and the adsorption time was 150 min. The kinetic data showed that the pseudo-second-order model can fit the adsorption kinetics. The sorption data could be well explained by the Langmuir model under different temperatures. The adsorption process was influenced by both intraparticle diffusion and external mass transfer. The experimental data analysis indicated that the electrostatic attraction and π–π stacking interactions between M-MWCNT and furaltadone might be the adsorption mechanism. Thermodynamic analysis reflected that adsorption of furaltadone on the M-MWCNT was spontaneous and exothermic. Our study showed that M-MWCNTs can be used as a potential adsorbent for removal of furaltadone from water and wastewater.

Magnetic chitosan composite particles: Evaluation of thorium and uranyl ion adsorption from aqueous solutions

2012 ◽  
Vol 87 (2) ◽  
pp. 1185-1191 ◽  
Author(s):  
Doina Hritcu ◽  
Doina Humelnicu ◽  
Gianina Dodi ◽  
Marcel Ionel Popa
Keyword(s):  
Aqueous Solutions ◽  
Uranyl Ion ◽  
Composite Particles ◽  
Ion Adsorption ◽  
Magnetic Chitosan ◽  
Chitosan Composite
Sign in / Sign up

Export Citation Format

Share Document