A low-temperature processed flower-like TiO2 array as an electron transport layer for high-performance perovskite solar cells

2016 ◽  
Vol 4 (17) ◽  
pp. 6521-6526 ◽  
Author(s):  
Xiao Chen ◽  
Li Juan Tang ◽  
Shuang Yang ◽  
Yu Hou ◽  
Hua Gui Yang
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Low Temperature ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
High Performance ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Transport Layer ◽  
Electron Transport Layer

A low-temperature processed flower-like TiO2 array layer was prepared and utilized as ETL in perovskite solar cells, leading to an enhanced power conversion efficiency (15.71 %) than that of traditional mesoporous TiO2 layer based devices (13.25 %) with less hysteresis.

Performance improvement of MXene-based perovskite solar cells upon property transition from metallic to semiconductive by oxidation of Ti3C2Tx in air

2021 ◽  
Author(s):  
Lin Yang ◽  
Dongxiao Kan ◽  
Chunxiang Dall'Agnese ◽  
Yohan Dall'Agnese ◽  
Baoning Wang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Low Temperature ◽  
Power Conversion Efficiency ◽  
Performance Improvement ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Transport Layer ◽  
Electron Transport Layer

Oxidization of Ti3C2Tx hydrocolloid is carried out to tune its properties desirable for an electron transport layer in low-temperature processed perovskite solar cells, rendering a champion power conversion efficiency of 18.29%.

Chlorine-doped SnO2 hydrophobic surfaces for large grain perovskite solar cells

2020 ◽  
Vol 8 (33) ◽  
pp. 11638-11646 ◽  
Author(s):  
Wenxiao Gong ◽  
Heng Guo ◽  
Haiyan Zhang ◽  
Jian Yang ◽  
Haiyuan Chen ◽  
...  
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Tin Oxide ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Higher Power

Both wetting and non-wetting tin oxide SnO2 were spin-coated and the non-wetting electron transport layer demonstrated a larger perovskite and higher power conversion efficiency.

A dithieno[3,2-a:3′,2′-j][5,6,11,12]chrysene diimide based polymer as an electron transport layer for efficient inverted perovskite solar cells

2021 ◽  
Author(s):  
Jintao Huang ◽  
Congwu Ge ◽  
Fei Qin ◽  
Jianwei Zhang ◽  
Xiaodi Yang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Conjugated Polymers ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Transport Layer ◽  
Electron Transport Layer

A series of electron-deficient conjugated polymers (P(DTCDI-T), P(DTCDI-2T) and P(DTCDI-3T)) are reported as effective ETLs for inverted PSCs, resulting in a champion power conversion efficiency (PCE) of 17.88% for P(DTCDI-2T) ETL based devices.

New PCBM/carbon based electron transport layer for perovskite solar cells

2017 ◽  
Vol 19 (27) ◽  
pp. 17960-17966 ◽  
Author(s):  
Abdullah Al Mamun ◽  
Tanzila Tasnim Ava ◽  
Kai Zhang ◽  
Helmut Baumgart ◽  
Gon Namkoong
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Carbon Based

Perovskite solar cells with PCBM/C60 showed a power conversion efficiency of 14% while perovskite solar cells with PCBM/carbon increased to 16%.

scholarly journals Room Temperature Processed Double Electron Transport Layers for Efficient Perovskite Solar Cells

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 329
Author(s):  
Wen Huang ◽  
Rui Zhang ◽  
Xuwen Xia ◽  
Parker Steichen ◽  
Nanjing Liu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Power Conversion Efficiency ◽  
Conversion Efficiency ◽  
Room Temperature ◽  
Deposition Time ◽  
Power Conversion ◽  
Perovskite Solar Cells ◽  
Electron Transport Layer ◽  
Double Electron

Zinc Oxide (ZnO) has been regarded as a promising electron transport layer (ETL) in perovskite solar cells (PSCs) owing to its high electron mobility. However, the acid-nonresistance of ZnO could destroy organic-inorganic hybrid halide perovskite such as methylammonium lead triiodide (MAPbI3) in PSCs, resulting in poor power conversion efficiency (PCE). It is demonstrated in this work that Nb2O5/ZnO films were deposited at room temperature with RF magnetron sputtering and were successfully used as double electron transport layers (DETL) in PSCs due to the energy band matching between Nb2O5 and MAPbI3 as well as ZnO. In addition, the insertion of Nb2O5 between ZnO and MAPbI3 facilitated the stability of the perovskite film. A systematic investigation of the ZnO deposition time on the PCE has been carried out. A deposition time of five minutes achieved a ZnO layer in the PSCs with the highest power conversion efficiency of up to 13.8%. This excellent photovoltaic property was caused by the excellent light absorption property of the high-quality perovskite film and a fast electron extraction at the perovskite/DETL interface.

Low-temperature interfacial engineering for flexible CsPbI2Br perovskite solar cells with high performance beyond 15%

2020 ◽  
Vol 8 (10) ◽  
pp. 5308-5314 ◽  
Author(s):  
Xia Yang ◽  
Hanjun Yang ◽  
Xiaotian Hu ◽  
Wenting Li ◽  
Zhimin Fang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Low Temperature ◽  
High Performance ◽  
High Efficiency ◽  
Perovskite Solar Cells ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Interfacial Engineering ◽  
Doped Zno

High-efficiency flexible CsPbI2Br PSCs are designed by introducing Al-doped ZnO as an electron-transport layer and tert-butyl cyanoacetate as a hole passivation layer. The optimized PSC exhibits outstanding stability and a champion PCE of 15.08%.

Sign in / Sign up

Export Citation Format

Share Document