This article provides an overview of the piezoelectric effect in all the classes of materials in which it is found to occur. This includes select materials from the categories of naturally occurring single crystals, polycrystalline ceramics, and semicrystalline polymers. Throughout this development, an attempt is made to point out the common factor for the piezoelectric effect in all these materials, namely, the presence of dipolar moieties, whose orientation brings about a net polarization in the material as a whole.The applications of each of these classes of materials are covered briefly. Each such application has a specific value based on the aggregate properties of the material as a whole, making each material complementary rather than competitive in device applications.Brief mention is made of the mathematics and geometry of the piezoelectric effect in order to define the piezoelectric constants by which the properties of these materials are described. The article then focuses on the basis of the piezoelectric response in synthetic polymers.Piezoelectricity or “pressure electricity” was coined from the Greek verb “piezen,” to press, by Pierre and Jacques Curie in the 1880s during an investigation of the symmetry in crystals. In this work it was found that certain crystals, lacking a center of symmetry, produced an electrical charge when mechanically deformed. The converse effect was also found to occur, whereby applying an electric field caused the crystal to change its shape. This phenomenon was attributed to a deformation of the net internal polarization in the crystal. When no external forces are present, the centers of positive and negative charges will coincide, and there is no net polarization. The application of a stress, be it mechanical (pressure) or electrical (applied field), causes a displacement of the centers of gravity of the positive and negative charges. In the absence of a center of symmetry, the charge displacement will be nonsymmetrical and thereby produce an induced dipole moment. This dipole moment, if produced by a mechanical stress, will cause the surfaces to develop an effective charge. If an external field displaces the charges, by electrostatic attraction or repulsion, it produces a mechanical strain which causes the material to deform. The mathematical relations describing this effect were developed in the few years following their discovery, making use of tensor notation to describe the directionality of the applied stress and the resultant strain.
Living supramolecular polymerization of fluorinated cyclohexanes