scholarly journals Macroscopic defects upon decomposition of CO2 clathrate hydrate crystals

2019 ◽  
Vol 21 (19) ◽  
pp. 9694-9708 ◽  
Author(s):  
Stefan Arzbacher ◽  
Nima Rahmatian ◽  
Alexander Ostermann ◽  
Bernhard Massani ◽  
Thomas Loerting ◽  
...  

Cracks and decomposition barriers observed in time-lapse micro-computed tomography measurements challenge existing models of gas hydrate decomposition.

2017 ◽  
Vol 4 (1) ◽  
pp. 160699 ◽  
Author(s):  
Martin J. R. Hall ◽  
Thomas J. Simonsen ◽  
Daniel Martín-Vega

The dramatic metamorphosis from larva to adult of insect orders such as Diptera cannot usually be witnessed because it occurs within an opaque structure. For the cyclorrhaphous dipterans, such as blow flies, this structure is the puparium, formed from the larval cuticle. Here, we reveal metamorphosis within the puparium of a blow fly at higher temporal resolution than previously possible with two-dimensional time-lapse videos created using the X-ray within a micro-computed tomography scanner, imaging development at 1 min and 2 min intervals. Our studies confirm that the most profound morphological changes occur during just 0.5% of the intrapuparial period (approx. equivalent to 1.25 h at 24°C) and demonstrate the significant potential of this technique to complement other methods for the study of developmental changes, such as hormone control and gene expression. We hope this will stimulate a renewed interest among students and researchers in the study of morphology and its astonishing transformation engendered by metamorphosis.


2001 ◽  
Vol 109 (5) ◽  
pp. 2482-2482
Author(s):  
Robin O. Cleveland ◽  
Ralph Müller ◽  
James C. Williams ◽  
James A. McAteer

2021 ◽  
Vol 6 (1) ◽  
pp. 14
Author(s):  
Christophe Cruanes ◽  
Keerthi Krishna Parvathaneni ◽  
Dmytro Vasiukov ◽  
Chung Hae Park

The mechanism of the crack propagation in three dimensional (3D) glass-fiber warp interlock epoxy composites under fatigue loading was investigated via time-lapse micro-computed tomography (µCT) observations. Two different composite samples were manufactured by means of a resin transfer molding (RTM) process under two different constant injection pressure conditions to generate intrayarn and interyarn voids separately. Fatigue loads were applied by blocks of 105 cycles and followed by µCT measurements. Regions of interest for micro tomography scans were selected based on hot spots detected by infrared thermography. After the analysis of the obtained data, it was observed that detectable cracks were generally initiated by debonding in the zone between two adjacent warp yarns and grew along their interface. Then, these cracks propagated along one of the warp yarns aligned in the loading direction while remaining in the middle of the specimen cross-section. The coalescence of the cracks and further propagation to the weakest zones were observed around and after the middle lifetime. Finally, we demonstrated the influence of the void defects at different material scales. I was found that interyarn voids have relatively little influence on the fatigue performance whereas they can, sometimes, attract and deviate cracks in the matrix zone between adjacent yarns. It was also shown that the intrayarn voids are crucial to degenerate the fatigue performance of the yarns at the micro-scale.


2013 ◽  
Author(s):  
Agnes Ostertag ◽  
Francoise Peyrin ◽  
Sylvie Fernandez ◽  
Jean-Denis Laredo ◽  
Vernejoul Marie-Christine De ◽  
...  

2020 ◽  
Vol 45 (3) ◽  
pp. 478-482
Author(s):  
Steven R. Manchester

Abstract—The type material on which the fossil genus name Ampelocissites was established in 1929 has been reexamined with the aid of X-ray micro-computed tomography (μ-CT) scanning and compared with seeds of extant taxa to assess the relationships of these fossils within the grape family, Vitaceae. The specimens were collected from a sandstone of late Paleocene or early Eocene age. Although originally inferred by Berry to be intermediate in morphology between Ampelocissus and Vitis, the newly revealed details of seed morphology indicate that these seeds represent instead the Ampelopsis clade. Digital cross sections show that the seed coat maintains its thickness over the external surfaces, but diminishes quickly in the ventral infolds. This feature, along with the elliptical chalaza and lack of an apical groove, indicate that Ampelocissites lytlensis Berry probably represents Ampelopsis or Nekemias (rather than Ampelocissus or Vitis) and that the generic name Ampelocissites may be useful for fossil seeds with morphology consistent with the Ampelopsis clade that lack sufficient characters to specify placement within one of these extant genera.


2018 ◽  
Author(s):  
Zoë E. Wilbur ◽  
◽  
Arya Udry ◽  
Arya Udry ◽  
Daniel M. Coleff ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document