Aerobic oxidative desulfurization coupling of Co polyanion catalysts and p-TsOH-based deep eutectic solvents through a biomimetic approach

2019 ◽  
Vol 21 (10) ◽  
pp. 2629-2634 ◽  
Author(s):  
Lulu Sun ◽  
Ting Su ◽  
Jiajia Xu ◽  
Dongmei Hao ◽  
Weiping Liao ◽  
...  

The use of coupled catalytic systems with ETMs facilitates the reaction process by transporting electrons from catalysts to the oxidant along a low-energy pathway and, finally, DBT was prone to oxidize to DBTO2.

RSC Advances ◽  
2017 ◽  
Vol 7 (67) ◽  
pp. 42590-42596 ◽  
Author(s):  
Chun-feng Mao ◽  
Rong-xiang Zhao ◽  
Xiu-ping Li

Propionic acid-based deep eutectic solvents (C3H6O2/X ZnCl2, X from 0.1 to 0.6) were synthesized by stirring a mixture of propionic acid and zinc chloride at 100 °C.


Fuel ◽  
2020 ◽  
Vol 265 ◽  
pp. 116967 ◽  
Author(s):  
Wei Liu ◽  
Tenghui Li ◽  
Guojia Yu ◽  
Jiangang Wang ◽  
Zhiyong Zhou ◽  
...  

Environments ◽  
2020 ◽  
Vol 7 (11) ◽  
pp. 97
Author(s):  
Chiau Yuan Lim ◽  
Mohd Faridzuan Majid ◽  
Sarrthesvaarni Rajasuriyan ◽  
Hayyiratul Fatimah Mohd Zaid ◽  
Khairulazhar Jumbri ◽  
...  

Extractive catalytic oxidative desulfurization (ECODS) is the one of the recent methods used in fuel desulfurization which involved the use of catalyst in the oxidative desulfurization of diesel fuel. This study is aimed to test the effectiveness of synthesized choline chloride (ChCl) based deep eutectic solvent (DES) in fuel desulfurization via ECODS method, with the presence of graphene oxide (GO) as catalyst and hydrogen peroxide (H2O2) as oxidant. In this study, 16 DESs based on choline chloride were synthesized using glycerol (GLY), ethylene glycol (EG), tetraethylene glycol (TEG) and polyethylene glycol (PEG). The characterization of the synthesized DES was carried out via Fourier transform infrared spectroscopy (FTIR) analysis, density, and viscosity determination. According to the screening result, ChCl-PEG (1:4) was found to be the most effective DES for desulfurization using ECODS method, with a removal of up to 47.4% of sulfur containing compounds in model oil in just 10 min per cycle after the optimization of the reaction parameters, and up to 95% desulfurization efficiency could be achieved by six cycles of desulfurization. It is found that the addition of GO as catalyst does not increase the desulfurization performance drastically; hence, future studies for the desulfurization performance of DESs made up from ChCl and PEG and its derivatives can be done simply by using extraction desulfurization (EDS) method instead of ECODS method, for cost reduction purpose and easier regulation of DES waste into environment.


2017 ◽  
Vol 243 ◽  
pp. 464-473 ◽  
Author(s):  
Alessandra Procentese ◽  
Francesca Raganati ◽  
Giuseppe Olivieri ◽  
Maria Elena Russo ◽  
Lars Rehmann ◽  
...  

2018 ◽  
Vol 15 (4) ◽  
pp. 841-848 ◽  
Author(s):  
Wei Jiang ◽  
Hao Jia ◽  
Zhanglong Zheng ◽  
Linhua Zhu ◽  
Lei Dong ◽  
...  

Author(s):  
Diana Julião ◽  
Susana Ribeiro ◽  
Baltazar de Castro ◽  
Luís Cunha-Silva ◽  
Salete S. Balula

In the last decade, polyoxometalates have been demonstrated to be efficient catalysts for the activation of oxidants in desulfurization processes. Successful results on desulfurization using polyoxometalates and hydrogen peroxide to desulfurize model oils and liquid fuels were reported and can be found in the literature. The desulfurization is an actual subject with notable interest for refineries and fuel cost, and consequently it is important to focus the scientific community to work in desulfurization technology in order to develop catalytic systems based on polyoxometalates capable to be reused, stable, efficient and selective. Therefore, the main goal is the design of heterogeneous polyoxometalate based catalysts. This chapter pretends to inform the research society about the scientific directions that have been taken using heterogeneous polyoxometalate catalysts in oxidative desulfurization of simulated and real liquid fuels. In addition, future perspectives are proposed to cover the actual needs of this area.


RSC Advances ◽  
2017 ◽  
Vol 7 (87) ◽  
pp. 55318-55325 ◽  
Author(s):  
Wei Jiang ◽  
Lei Dong ◽  
Wei Liu ◽  
Tao Guo ◽  
Hongping Li ◽  
...  

Deep eutectic solvents (DESs) are ‘green’ sustainable solvents with wide applications such as extractive desulfurization of fuel; however, their low extraction efficiency is a major limitation to such applications.


2017 ◽  
Vol 339 ◽  
pp. 216-222 ◽  
Author(s):  
Lingwan Hao ◽  
Meiri Wang ◽  
Wenjuan Shan ◽  
Changliang Deng ◽  
Wanzhong Ren ◽  
...  

2017 ◽  
Author(s):  
◽  
Huan Jiang

Organic sulfur compounds in diesel fuel produce SOx during combustion in vehicles, leading to severe environmental pollution and causing health issues. The U.S. Environmental Protection Agency has established increasingly rigid sulfur-content standards, which has led to intense interest in deep desulfurization of diesel fuel. However, current desulfurization technology is not sufficient to achieve the ultralow sulfur diesel (ULSD) required for use in highway vehicles. Deep eutectic solvents (DESs) appearing at the beginning of this century have become excellent extraction agents for the deep extractive desulfurization process, owing to its low cost, simple and environmentally friendly synthesis process, chemical stability, non-volatility, and being biodegradable. Research shows that DESs have better efficiency than traditional ionic liquids (ILs). Therefore, DESs are better suited for use in desulfurization. In this study, a new potassium salt-based DES was synthesized using potassium carbonate(K2CO3) and ethylene glycol (EG). This type of DES and 30 wt.% H2O2 were employed as extractant and oxidant separately for the desulfurization system. Various experiments were carried out on the process of oxidative desulfurization (ODS), extractive desulfurization(EDS) and extractive and oxidative desulfurization (EODS) to find the optimal desulfurization process with this new type of DES. The study found EDS to be the optimal desulfurization process, with a sulfur removal efficiency of 86% at 30[degrees]C after 2 hours, which is higher than most DESs.


Sign in / Sign up

Export Citation Format

Share Document