scholarly journals Hierarchical ordering in light-triggered additive manufacturing

2020 ◽  
Vol 11 (46) ◽  
pp. 7316-7329
Author(s):  
Joël Monti ◽  
Eva Blasco
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Future Prospects ◽  
Structural Hierarchy ◽  
Recent Developments ◽  
Hierarchical Ordering

Herein, recent developments in the 3D printing of materials with structural hierarchy and their future prospects are reviewed. It is shown that increasing the extent of ordering, is essential to access novel properties and functionalities.

scholarly journals 4D Printing: A Review on Recent Progresses

Micromachines ◽  
2020 ◽  
Vol 11 (9) ◽  
pp. 796 ◽  
Author(s):  
Honghui Chu ◽  
Wenguang Yang ◽  
Lujing Sun ◽  
Shuxiang Cai ◽  
Rendi Yang ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Three Dimensional ◽  
Complex Structures ◽  
Future Prospects ◽  
4D Printing ◽  
Stimulation Method ◽  
Shape Property ◽  
External Stimuli

Since the late 1980s, additive manufacturing (AM), commonly known as three-dimensional (3D) printing, has been gradually popularized. However, the microstructures fabricated using 3D printing is static. To overcome this challenge, four-dimensional (4D) printing which defined as fabricating a complex spontaneous structure that changes with time respond in an intended manner to external stimuli. 4D printing originates in 3D printing, but beyond 3D printing. Although 4D printing is mainly based on 3D printing and become an branch of additive manufacturing, the fabricated objects are no longer static and can be transformed into complex structures by changing the size, shape, property and functionality under external stimuli, which makes 3D printing alive. Herein, recent major progresses in 4D printing are reviewed, including AM technologies for 4D printing, stimulation method, materials and applications. In addition, the current challenges and future prospects of 4D printing were highlighted.

scholarly journals A comprehensive review of recent developments in 3D printing technique for ceramic membrane fabrication for water purification

RSC Advances ◽  
2019 ◽  
Vol 9 (29) ◽  
pp. 16869-16883 ◽  
Author(s):  
Hitesh Dommati ◽  
Saikat Sinha Ray ◽  
Jia-Chang Wang ◽  
Shiao-Shing Chen
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Water Purification ◽  
Ceramic Membrane ◽  
Comprehensive Review ◽  
Membrane Fabrication ◽  
Printing Technique ◽  
Recent Developments ◽  
Competitive Prices ◽  
3D Printing Technique

Additive manufacturing (AM), which is also commonly known as 3D printing, provides flexibility in the manufacturing of complex geometric parts at competitive prices and within a low production time.

Digital grotesque: Towards a micro-tectonic architecture

2013 ◽  
Vol 5 (2) ◽  
pp. 194-201
Author(s):  
Michael Hansmeyer ◽  
Benjamin Dillenburger
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Large Scale ◽  
New Technologies ◽  
Computational Design ◽  
Small Scale ◽  
Printing Technology ◽  
Recent Developments ◽  
Complex Forms ◽  
Specific Experiment

Computational design allows for architecture with an extraordinary degree of topographical and topological complexity. Limitations of traditional CNC technologies have until recently precluded this architecture from being fabricated. While additive manufacturing has made it possible to materialize these complex forms, this has occurred only at a very small scale. In trying to apply additive manufacturing to the construction of full-scale architecture, one encounters a dilemma: existing large-scale 3D printing methods can only print highly simplified shapes with rough details, while existing high-resolution technologies have limited print spaces, high costs, or material attributes that preclude a structural use. This paper provides a brief background on additive manufacturing technology and presents recent developments in sand-printing technology that overcome current 3D printing restrictions. It then presents a specific experiment, Digital Grotesque project, which is the first application of 3D sand-printing technology at an architecture scale. It describes how this project attempts to exploit the potentials of these new technologies.

Additive manufacturing as an emerging technology for fabrication of microelectromechanical systems (MEMS)

2019 ◽  
Vol 2 (2) ◽  
pp. 175-197 ◽  
Author(s):  
Sanjay Kumar ◽  
Pulak Bhushan ◽  
Mohit Pandey ◽  
Shantanu Bhattacharya
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Microelectromechanical Systems ◽  
Manufacturing Sector ◽  
Process Improvements ◽  
Recent Success ◽  
Mems Fabrication ◽  
Recent Developments ◽  
Potential Applications ◽  
Printing Processes

The recent success of additive manufacturing processes (also called, 3D printing) in the manufacturing sector has led to a shift in the focus from simple prototyping to real production-grade technology. The enhanced capabilities of 3D printing processes to build intricate geometric shapes with high precision and resolution have led to their increased use in fabrication of microelectromechanical systems (MEMS). The 3D printing technology has offered tremendous flexibility to users for fabricating custom-built components. Over the past few decades, different types of 3D printing technologies have been developed. This article provides a comprehensive review of the recent developments and significant achievements in most widely used 3D printing technologies for MEMS fabrication, their working methodology, advantages, limitations, and potential applications. Furthermore, some of the emerging hybrid 3D printing technologies are discussed, and the current challenges associated with the 3D printing processes are addressed. Finally, future directions for process improvements in 3D printing techniques are presented.

scholarly journals The Effect of Deviation Due to the Manufacturing Accuracy in the Parameters of an MPP on Its Acoustic Properties: Trial Production of MPPs of Different Hole Shapes Using 3D Printing

Acoustics ◽  
2020 ◽  
Vol 2 (3) ◽  
pp. 605-616
Author(s):  
Kimihiro Sakagami ◽  
Midori Kusaka ◽  
Takeshi Okuzono ◽  
Shinsuke Nakanishi
Keyword(s):  
Additive Manufacturing ◽  
Pilot Study ◽  
3D Printing ◽  
Low Cost ◽  
Normal Incidence ◽  
Acoustic Properties ◽  
3D Printer ◽  
Recent Developments ◽  
Manufacturing Accuracy ◽  
Basic Studies

In this study, we discuss the effect of the manufacturing accuracy of a microperforated panel (MPP) produced by 3D printers on acoustic properties through measured and calculated results as a pilot study. The manufacturing costs of MPPs have long been one of their shortcomings; however, with recent developments in the manufacturing process, low-cost MPPs are now available. In a further attempt at reducing the cost, 3D printing techniques have recently been considered. Cases of trial production of MPPs manufactured by 3D printing have been reported. When introducing such new techniques, despite the conventional microdrill procedure, manufacturing accuracy can often become an issue. However, there are few studies reporting the effect of manufacturing accuracy on the acoustic properties in the case of 3D-printed MPPs. Considering this situation, in this pilot study, we attempted to produce MPPs with circular and rectangular perforations using a consumer 3D printer of the additive manufacturing type. The hole sizes of the specimens were measured, and the accuracy was evaluated. The normal incidence absorption coefficient and specific impedance were measured using an impedance tube. The measured results were compared with the theoretical values using Guo’s model. Through these basic studies, the MPPs produced by an additive manufacturing 3D printer demonstrated good sound absorption performance; however, due to the large deviations of parameters, the agreement with the theoretical values was not good, which suggests that it is difficult to predict the acoustic properties of MPPs made by a consumer-grade additive manufacturing 3D printer.

scholarly journals 3D Printing in Digital Prosthetic Dentistry: An Overview of Recent Developments in Additive Manufacturing

2021 ◽  
Vol 10 (9) ◽  
pp. 2010
Author(s):  
Josef Schweiger ◽  
Daniel Edelhoff ◽  
Jan-Frederik Güth
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Popular Media ◽  
Factual Information ◽  
Dental Restorations ◽  
Dental Prostheses ◽  
Laboratory Services ◽  
Recent Developments ◽  
Dental Practices ◽  
Rational Evaluation

Popular media now often present 3D printing as a widely employed technology for the production of dental prostheses. This article aims to show, based on factual information, to what extent 3D printing can be used in dental laboratories and dental practices at present. It attempts to present a rational evaluation of todays´ applications of 3D printing technology in the context of dental restorations. In addition, the article discusses future perspectives and examines the ongoing viability of traditional dental laboratory services and manufacturing processes. It also shows which expertise is needed for the digital additive manufacturing of dental restorations.

scholarly journals Harnessing 3D Printing of Plastics in Construction—Opportunities and Limitations

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4547
Author(s):  
Aneta Skoratko ◽  
Jacek Katzer
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Construction Industry ◽  
Practical Applications ◽  
Spatial Reinforcement ◽  
Permanent Formwork ◽  
Recent Developments ◽  
The Subject ◽  
Concrete Elements

Additive manufacturing has been of increasing interest to the construction industry for the last ten years. The subject of the research is the printing of concrete, metals, and plastics. In their analysis and research, authors have focused on printing plastics. 3D printing of reinforcement of concrete elements made of plastics can significantly improve the efficiency of their erection, reduce the amount of waste, and optimize their shape. In this paper, recent developments in the 3D printing of plastics for construction are reviewed. Various applications were discussed, including unconventional spatial reinforcement (impossible to achieve in a traditional way), printed permanent formwork, etc. The challenges for further research and practical applications of such solutions were also discussed.

scholarly journals Use of 3D printing to create multifunctional cementitious composites: review, challenges and opportunities

2020 ◽  
Vol 5 ◽  
pp. 17-25
Author(s):  
Branko Savija
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Construction Industry ◽  
Waste Reduction ◽  
Cementitious Composites ◽  
Vascular Networks ◽  
Practical Applications ◽  
Challenges And Opportunities ◽  
Recent Developments ◽  
Construction Efficiency

Additive manufacturing has been a topic of interest in the construction industry for the past decade. 3D printing of concrete structures promises great improvements in construction efficiency, waste reduction, and shape optimization. Another field where additive manufacturing offers opportunities is on the material level of cementitious composites. Techniques developed in other fields can be used to create multifunctional cementitious composites beyond what is possible with conventional technologies. This letter reviews recent developments in the field. Different applications are discussed: creating reinforcement for cementitious composites, creating capsules and vascular networks, and cementitious composites with superior mechanical behavior. Challenges for further research and practical applications of such materials are also discussed.

scholarly journals Efficient 3D printing via photooxidation of ketocoumarin based photopolymerization

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Xiaoyu Zhao ◽  
Ye Zhao ◽  
Ming-De Li ◽  
Zhong’an Li ◽  
Haiyan Peng ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Visible Light ◽  
Light Exposure ◽  
Three Dimensional ◽  
3D Printer ◽  
Light Penetration ◽  
Viable Solution

AbstractPhotopolymerization-based three-dimensional (3D) printing can enable customized manufacturing that is difficult to achieve through other traditional means. Nevertheless, it remains challenging to achieve efficient 3D printing due to the compromise between print speed and resolution. Herein, we report an efficient 3D printing approach based on the photooxidation of ketocoumarin that functions as the photosensitizer during photopolymerization, which can simultaneously deliver high print speed (5.1 cm h−1) and high print resolution (23 μm) on a common 3D printer. Mechanistically, the initiating radical and deethylated ketocoumarin are both generated upon visible light exposure, with the former giving rise to rapid photopolymerization and high print speed while the latter ensuring high print resolution by confining the light penetration. By comparison, the printed feature is hard to identify when the ketocoumarin encounters photoreduction due to the increased lateral photopolymerization. The proposed approach here provides a viable solution towards efficient additive manufacturing by controlling the photoreaction of photosensitizers during photopolymerization.

Sign in / Sign up

Export Citation Format

Share Document