scholarly journals The sliding mode control approach design for nonholonomic mobile robots based on non‐negative piecewise predefined‐time control law

Author(s):  
Lixiong Lin ◽  
Peixin Wu ◽  
Bingwei He ◽  
Yanjie Chen ◽  
Jiachun Zheng ◽  
...  
2019 ◽  
Vol 52 (5-6) ◽  
pp. 720-728
Author(s):  
Huawei Niu ◽  
Qixun Lan ◽  
Yamei Liu ◽  
Huafeng Xu

In this article, the continuous integral terminal sliding mode control problem for a class of uncertain nonlinear systems is investigated. First of all, based on homogeneous system theory, a global finite-time control law with simple structure is proposed for a chain of integrators. Then, inspired by the proposed finite-time control law, a novel integral terminal sliding mode surface is designed, based on which an integral terminal sliding mode control law is constructed for a class of higher order nonlinear systems subject disturbances. Furthermore, a finite-time disturbance observer-based integral terminal sliding mode control law is proposed, and strict theoretical analysis shows that the composite integral terminal sliding mode control approach can eliminate chattering completely without losing disturbance attenuation ability and performance robustness of integral terminal sliding mode control. Simulation examples are given to illustrate the simplicity of the new design approach and effectiveness.


2018 ◽  
Vol 41 (4) ◽  
pp. 934-941 ◽  
Author(s):  
Chunmei Yu ◽  
Xun Xie

This work presents a novel control approach to the attitude stabilisation problem of rigid satellites with external disturbance, control constraint, and angular velocity constraint. The controller is developed in the framework of dynamic sliding mode control. A dynamic sliding mode surface is preliminarily chosen, and then a structure-simple sliding mode control law is synthesised. It is proved that the proposed control law can successfully accomplish the attitude stabilisation manoeuvre. The attitude is exponentially stabilised, and the angular velocity is stabilised with an exponential rate to a ball with a small radius. In comparison with the static sliding mode surface-based controllers, the proposed approach can provide a fast convergence rate. The system convergence time can be shortened by dynamically updating the control parameters in the sliding mode. Simulation results are presented to examine the feasibility of the presented solution.


2019 ◽  
Vol 15 (3) ◽  
pp. 155014771983357 ◽  
Author(s):  
Waqar Alam ◽  
Qudrat Khan ◽  
Raja Ali Riaz ◽  
Rini Akmeliawati

Diabetes mellitus is a persistent metabolic syndrome caused by impaired capability of the body’s production and usage of insulin. This impaired capability results in chronic hyperglycaemia, the elevated glucose concentration in the bloodstream, which may lead to many incurable complications. To escape this dire situation, a proper model-based exogenous infusion of insulin bolus is required, which is usually established via different feedback control strategies. In this article, the authors present a mathematical model–based robust integral sliding mode control approach for stabilization of internal glucose–insulin regulatory system in type-1 diabetic patient. Since the state variables of the system are not directly available to the controller, a uniform exact differentiator observer is employed to accomplish the aforementioned task. In the proposed control law, the incorporation of integral term in the switching manifold eliminates the reaching phase, which causes the sliding mode to establish from the very initial point, thus enhances the robustness property of the proposed control scheme. Moreover, the chattering problem is also substantially suppressed to a considerable extent along a defined manifold. To verify the theoretical analysis, the proposed control law is verified via computer simulations which demonstrate the effectiveness of the proposed control law against the external perturbations, that is, unannounced meal intake and physical exercise.


Author(s):  
Mehdi Nikkhah ◽  
Hashem Ashrafiuon ◽  
Farbod Fahimi

This paper presents a robust tracking control algorithm for underactuated biped robots. The biped considered in this work is modeled as a five-link planar robot with four actuators located at hip and knee joints to control the joint angles. The control law is defined based on the sliding mode control approach. The objective of the controller is to generate stable walking based on predefined desired trajectories. The planning of the trajectory in swing phase is discussed while the double support phase is considered to be instantaneous and the impact of the swing leg with the ground is modeled as rigid body contact. In order to formulate the sliding control law, we define four first-order sliding surfaces, based on the number of actuators, as a linear combination of tracking joint positions and velocities. The control approach is shown to guarantee that all trajectories will reach and stay on these surfaces. The surface parameters are then selected to ensure the stability of the surfaces leading to an asymptotically stable control law. Numerical simulation is presented for tracking a multi-step walk of a biped robot.


2014 ◽  
Vol 971-973 ◽  
pp. 714-717 ◽  
Author(s):  
Xiang Shi ◽  
Zhe Xu ◽  
Qing Yi He ◽  
Ka Tian

To control wheeled inverted pendulum is a good way to test all kinds of theories of control. The control law is designed, and it based on the collaborative simulation of MATLAB and ADAMS is used to control wheeled inverted pendulum. Then, with own design of hardware and software of control system, sliding mode control is used to wheeled inverted pendulum, and the experimental results of it indicate short adjusting time, the small overshoot and high performance.


Sign in / Sign up

Export Citation Format

Share Document