scholarly journals Thermodynamics of the dead-zone inner edge in protoplanetary disks

2014 ◽  
Vol 564 ◽  
pp. A22 ◽  
Author(s):  
Julien Faure ◽  
Sébastien Fromang ◽  
Henrik Latter
2020 ◽  
Vol 644 ◽  
pp. A74
Author(s):  
Eduard I. Vorobyov ◽  
Sergey Khaibrakhmanov ◽  
Shantanu Basu ◽  
Marc Audard

Aims. Accretion bursts triggered by the magnetorotational instability (MRI) in the innermost disk regions were studied for protoplanetary gas-dust disks that formed from prestellar cores of a various mass Mcore and mass-to-magnetic flux ratio λ. Methods. Numerical magnetohydrodynamics simulations in the thin-disk limit were employed to study the long-term (~1.0 Myr) evolution of protoplanetary disks with an adaptive turbulent α-parameter, which explicitly depends on the strength of the magnetic field and ionization fraction in the disk. The numerical models also feature the co-evolution of gas and dust, including the back-reaction of dust on gas and dust growth. Results. A dead zone with a low ionization fraction of x≲10−13 and temperature on the order of several hundred Kelvin forms in the inner disk soon after its formation, extending from several to several tens of astronomical units depending on the model. The dead zone features pronounced dust rings that are formed due to the concentration of grown dust particles in the local pressure maxima. Thermal ionization of alkaline metals in the dead zone trigger the MRI and associated accretion burst, which is characterized by a sharp rise, small-scale variability in the active phase, and fast decline once the inner MRI-active region is depleted of matter. The burst occurrence frequency is highest in the initial stages of disk formation and is driven by gravitational instability (GI), but it declines with diminishing disk mass-loading from the infalling envelope. There is a causal link between the initial burst activity and the strength of GI in the disk fueled by mass infall from the envelope. We find that the MRI-driven burst phenomenon occurs for λ = 2–10, but diminishes in models with Mcore ≲ M⊙, suggesting a lower limit on the stellar mass for which the MRI-triggered burst can occur. Conclusions. The MRI-triggered bursts occur for a wide range of mass-to-magnetic flux ratios and initial cloud core masses. The burst occurrence frequency is highest in the initial disk formation stage and reduces as the disk evolves from a gravitationally unstable to a viscous-dominated state. The MRI-triggered bursts are intrinsically connected with the dust rings in the inner disk regions, and both can be a manifestation of the same phenomenon, that is to say the formation of a dead zone.


2021 ◽  
Vol 20 (2) ◽  
pp. 25-32
Author(s):  
Noorhazirah Sunar ◽  
Mohd Fua’ad Rahmat ◽  
Ahmad ‘Athif Mohd Fauzi ◽  
Zool Hilmi Ismail ◽  
Siti Marhanis Osman ◽  
...  

Dead-zone in the valve degraded the performances of the Electro-Pneumatic Actuator (EPA) system.  It makes the system difficult to control, become unstable and leads to chattering effect nearest desired position.  In order to cater this issue, the EPA system transfer function and the dead-zone model is identified by MATLAB SI toolbox and the Particle Swarm Optimization (PSO) algorithm respectively.  Then a parametric control is designed based on pole-placement approach and combine with feed-forward inverse dead-zone compensation.  To reduce chattering effect, a smooth parameter is added to the controller output.  The advantages of using these techniques are the chattering effect and the dead-zone of the EPA system is reduced.  Moreover, the feed-forward system improves the transient performance.  The results are compared with the pole-placement control (1) without compensator and (2) with conventional dead-zone compensator.  Based on the experimental results, the proposed controller reduced the chattering effect due to the controller output of conventional dead-zone compensation, 90% of the pole-placement controller steady-state error and 30% and 40% of the pole-placement controller with conventional dead-zone compensation settling time and rise time.


Author(s):  
Mohammad A. Al-Shudeifat

Symmetric piecewise nonlinearities are employed here to design highly efficient nonlinear energy sink (NES). These symmetric piecewise nonlinearities are usually called in the literature as dead-zone nonlinearities. The proposed dead-zone NES includes symmetric clearance about its equilibrium position in which zero stiffness and linear viscous damping are incorporated. At the boundaries of the symmetric clearance, the NES is coupled to the linear structure by either linear or nonlinear stiffness components in addition to similar viscous damping to that in the clearance zone. By this flexible design of the dead-zone NES, we obtain a considerable enhancement in the NES efficiency at moderate and severe energy inputs. Moreover, the dead-zone NES is also found here through numerical simulations to be more robust for damping and stiffness variations than the linear absorber and some other types of NESs.


2002 ◽  
Vol 2 (3/4) ◽  
pp. 187-191 ◽  
Author(s):  
T. Faug ◽  
P. Lachamp ◽  
M. Naaim

Abstract. An experimental investigation with dry granular flows passing over an obstacle down a rough inclined channel has been performed. The aim is to improve our understanding of the interaction between dense snow avalanches and defence structures. Specific attention was directed to the study of the zone of influence upstream from the obstacle, linked to the formation of a dead zone. The dead zone length L was systematically measured as a function of the obstacle height H and the channel inclination θ, for several discharges. In a whole range of channel inclinations, all the data are shown to collapse into a single curve when properly scaled. The scaling is based on the introduction of a theoretical deposit length (depending on H, θ and the internal friction angle of the material, φ) and a Froude number of the flow depending on the obstacle height.


Sign in / Sign up

Export Citation Format

Share Document