scholarly journals Dispersed reinforcement of columns of a high-rise building

2020 ◽  
Vol 157 ◽  
pp. 06029
Author(s):  
Varvara Kleshchevnikova ◽  
Ksenia Strelets ◽  
Svetlana Belyaeva ◽  
Olga Nikonova ◽  
Yulia Volkova ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Crack Resistance ◽  
Model Comparison ◽  
Steel Fiber ◽  
Basalt Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
High Rise ◽  
High Rise Building ◽  
Initial Modulus

The article deals with the application of combined reinforcement of concrete with steel and basalt fibers. A model of a high-rise building was calculated in the LIRA-SAPR 2013 software. Design and characteristic strength of steel fiber and basalt fiber reinforced concretes to compression and tension and the initial elastic modulus were determined to calculate the model. Comparison of the effect of B40 concrete steel fiber reinforced concrete (SFRC) and basalt fiber reinforced concrete (BFRC) on column reinforcement was performed by comparing the required areas of reinforcement, as well as the percentage of reinforcement, taking into account crack resistance. The total area of reinforcement decreased with the addition of steel fiber by 36.9% and basalt fiber by 39.9%. The percentage of reinforcement also decreased, taking into account crack resistance, from 0.694 for columns with concrete B40 to 0.437 for SFRC columns and to 0.417 for BFRC columns. The addition of fiber increases the strength characteristics of concrete: compressive strength increased by 35.8% and 77.2%, tensile strength by 150.2% and 75.7%, crack resistance by 37% and 39.9%, the initial modulus of elasticity of the material increased by 8.7% and 3.7% for SFRC and BFRC respectively compared with concrete B40.

scholarly journals Experimental Study on Basic Mechanical Properties of Basalt Fiber Reinforced Concrete

Materials ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1362 ◽  
Author(s):  
Hao Zhou ◽  
Bin Jia ◽  
Hui Huang ◽  
Yanling Mou
Keyword(s):  
Mechanical Properties ◽  
Reinforced Concrete ◽  
Crack Resistance ◽  
Failure Modes ◽  
Basalt Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Improvement Effect ◽  
Flexural Tests ◽  
Resistance Performance

Blending a certain proportion of basalt fiber into concrete improves the toughness of concrete, which prevents cracking and avoids the brittle behaviors. In this paper, the compressive, tensile, and flexural tests of concrete with different basalt fiber contents were carried out. Then the test phenomena, failure modes, and mechanical properties were compared and analyzed to derive the relationship between the basalt fiber contents and mechanical properties. The toughness and crack resistance performance of basalt fiber reinforced concrete were evaluated by the fracture energy, advanced toughness parameters, and characteristic length proposed by Hillerborg. The correlation coefficient of basalt fiber was introduced to establish the calculation formula for mechanical properties of basalt fiber reinforced concrete. The results indicated that basalt fiber significantly improved the toughness and crack resistance performance of concrete. The enhancing effect of the basalt fiber on the compressive strength of concrete is lower than that of tensile strength and flexural strength. Moreover, the improvement effect was the highest with the basalt fiber content was 0.3% and 0.4%.

scholarly journals Shear behavior of steel or basalt fiber reinforced concrete beams without stirrup reinforcement

2017 ◽  
Vol 4 (20) ◽  
pp. 391-404
Author(s):  
Julita Krassowska ◽  
Marta Kosior-Kazberuk
Keyword(s):  
Reinforced Concrete ◽  
Steel Fiber ◽  
Concrete Beams ◽  
Basalt Fiber ◽  
Shear Behavior ◽  
Fiber Content ◽  
Fiber Reinforced Concrete ◽  
Reinforced Concrete Beams ◽  
Shear Reinforcement ◽  
Fiber Reinforced

The paper presents the results of a comprehensive investigation aimed at studying the shear behavior of basalt or steel fiber-reinforced concrete (BFRC or SFRC) beams, as well as analyzing the possibility of using basalt or steel fibers as a minimum shear reinforcement. Two-span reinforced concrete beams with the cross-section of 8×16 cm and length of 200 cm and diversified spacing of stirrups were tested. Steel stirrups or alternatively steel or basalt fibers were used as a shear reinforcement. Steel fiber content was 80 and 120 kg/m3and basalt fiber content was 2.5 and 5.0 kg/m3. The shear behavior and/or bending capacity of SFRC and BFRC beams were studied. The result indicated that fibers can be safely used as a minimum shear reinforcement.

Acoustic emission by steel fiber reinforced concrete under tensile damage

2017 ◽  
Vol 59 (7-8) ◽  
pp. 653-660 ◽  
Author(s):  
Wang Yan ◽  
Ge Lu ◽  
Chen Shi Jie ◽  
Zhou Li ◽  
Zhang Ting Ting
Keyword(s):  
Acoustic Emission ◽  
Reinforced Concrete ◽  
Steel Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Tensile Damage

On axial compressive behavior of steel fiber reinforced concrete confined by FRP

2021 ◽  
pp. 136943322098165
Author(s):  
Hossein Saberi ◽  
Farzad Hatami ◽  
Alireza Rahai
Keyword(s):  
Reinforced Concrete ◽  
Experimental Test ◽  
Steel Fiber ◽  
Experimental Tests ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Test Results ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Frp Confinement

In this study, the co-effects of steel fibers and FRP confinement on the concrete behavior under the axial compression load are investigated. Thus, the experimental tests were conducted on 18 steel fiber-reinforced concrete (SFRC) specimens confined by FRP. Moreover, 24 existing experimental test results of FRP-confined specimens tested under axial compression are gathered to compile a reliable database for developing a mathematical model. In the conducted experimental tests, the concrete strength was varied as 26 MPa and 32.5 MPa and the steel fiber content was varied as 0.0%, 1.5%, and 3%. The specimens were confined with one and two layers of glass fiber reinforced polymer (GFRP) sheet. The experimental test results show that simultaneously using the steel fibers and FRP confinement in concrete not only significantly increases the peak strength and ultimate strain of concrete but also solves the issue of sudden failure in the FRP-confined concrete. The simulations confirm that the results of the proposed model are in good agreement with those of experimental tests.

Driven steel-fiber-reinforced-concrete pyramidal piles

1984 ◽  
Vol 21 (3) ◽  
pp. 108-111
Author(s):  
V. S. Sterin ◽  
V. A. Golubenkov ◽  
G. S. Rodov ◽  
B. V. Leikin ◽  
L. G. Kurbatov
Keyword(s):  
Reinforced Concrete ◽  
Steel Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete
Sign in / Sign up

Export Citation Format

Share Document