scholarly journals Locus of first crystals on the evaporative surface of a vertically textured porous medium

2018 ◽  
Vol 81 (1) ◽  
pp. 11102 ◽  
Author(s):  
Babacar Diouf ◽  
Sandrine Geoffroy ◽  
Ariane Abou Chakra ◽  
Marc Prat
Keyword(s):  
Porous Medium ◽  
Mass Fraction ◽  
Saline Solution ◽  
Liquid Volume ◽  
Porous Domain ◽  
Fraction Distribution ◽  
Initial Salt ◽  
Medium Column ◽  
Very High

The evaporation of a saline solution from a heterogeneous porous medium formed by the assembly of a coarse medium column and a fine medium column is studied numerically. We concentrate on the locus of the formation of first crystals on the evaporative surface from the computation of the ion mass fraction distribution at the surface prior to the efflorescence development. Two basic situations considered in previous works, namely the evaporation–wicking situation and the drying situation are considered. The study makes clear that each situation leads to a markedly different locus of the efflorescence formation, except, however, for very high initial salt concentrations. The study emphasizes the key-role of the velocity field induced in the porous domain in the case of the evaporation–wicking situation. In the case of the drying situation, a key aspect lies in the local increase in the ion mass fraction due to the local desaturation, i.e. the local shrinking of the liquid volume containing the ions.

THE ROLE OF GRASSLAND IN MANAGEMENT

1968 ◽  
pp. 44-49
Author(s):  
B.K. Cameron
Keyword(s):  
Soil Temperature ◽  
Annual Rainfall ◽  
Silt Loam ◽  
Average Annual Rainfall ◽  
Very High ◽  
Wilting Point

THE PROPERTY to be discussed is a mixed sheep and cropping unit, situated ei ht a miles east of Ashburton and midway between the Ra aia and the Ashburton rivers. Average annual rainfall is 27 in., evenly spread, but there is very high summer evaporation and therefore frequent droughts. On average, the soil is below wilting point for 40 to 50 days each summer. Winters are cold with the soil temperature being below 48°F for about four months each year. The soil is a Lismore stony silt loam averaging 9 in. in depth over gravel.

Conservative solute transport with periodic velocity and sinusoidal source concentration in semi-infinite porous media: An analytical solution

2014 ◽  
Vol 6 (1) ◽  
pp. 1024-1031
Author(s):  
R R Yadav ◽  
Gulrana Gulrana ◽  
Dilip Kumar Jaiswal
Keyword(s):  
Porous Medium ◽  
Porous Media ◽  
Laplace Transformation ◽  
Seepage Velocity ◽  
Transformation Technique ◽  
Numerical Examples ◽  
One Dimensional ◽  
Porous Domain ◽  
Conservative Solute Transport ◽  
Source Concentration

The present paper has been focused mainly towards understanding of the various parameters affecting the transport of conservative solutes in horizontally semi-infinite porous media. A model is presented for simulating one-dimensional transport of solute considering the porous medium to be homogeneous, isotropic and adsorbing nature under the influence of periodic seepage velocity. Initially the porous domain is not solute free. The solute is initially introduced from a sinusoidal point source. The transport equation is solved analytically by using Laplace Transformation Technique. Alternate as an illustration; solutions for the present problem are illustrated by numerical examples and graphs.

Role of Vasavaleha in the management of Covid19

2020 ◽  
Vol 11 (SPL1) ◽  
pp. 259-261
Author(s):  
Aamir Khan ◽  
Rajni K. Gurmule
Keyword(s):  
Immune System ◽  
Human Body ◽  
Respiratory Diseases ◽  
Spreading Rate ◽  
Host Immune System ◽  
Shortness Of Breath ◽  
Antitussive Effect ◽  
Corona Viruses ◽  
Very High

Vasavaleha is one of the best medicine given for respiratory diseases. Corona viruses typically affect the respiratory system, causing symptoms such as coughing, fever and shortness of breath. It also affects host immune system of human body. Spreading rate of this disease is very high. Whole world is seeking for the treatment which can uproots this diseases. There in no vaccine available till date against this pandemic disease. Ayurveda mainly focuses on prevention of diseases alongwith its total cure. Rajyakshma Vyadhi is MadhyamMarga Roga as per Ayurveda. It shows many symptoms such as Kasa, Shwasa etc. By overall view of Covid 19, shows its resemblance with Rajyakshma Vyadhi described in Ayurveda. Vasavaleha is a Kalpa which is described in Rogadhikara of Rajyakshma. It shows Kasahara, Shwashara properties. It consists of Vasa, Pipalli, Madhu and Goghrita. These components shows actions like bronchodilation, antitussive effect and many more other actions. Pipalli shows important Rasayana effect. So in present review, we have tried to focus on role of Vasavaleha in the management of Covid 19. This can be used as preventive as well as adjuvant medication in treating Covid 19. There is need of further clinical research to rule of exact action of Vasavaleha against Covid 19.

Capillary Imbibition Dynamics in Porous Media

2014 ◽  
Author(s):  
Swayamdipta Bhaduri ◽  
Pankaj Sahu ◽  
Siddhartha Das ◽  
Aloke Kumar ◽  
Sushanta K. Mitra
Keyword(s):  
Porous Medium ◽  
Porous Media ◽  
Paper Strip ◽  
Capillary Imbibition ◽  
Flow Physics ◽  
Fundamental Understanding ◽  
Paper Based Microfluidics ◽  
To Come

The phenomenon of capillary imbibition through porous media is important both due to its applications in several disciplines as well as the involved fundamental flow physics in micro-nanoscales. In the present study, where a simple paper strip plays the role of a porous medium, we observe an extremely interesting and non-intuitive wicking or imbibition dynamics, through which we can separate water and dye particles by allowing the paper strip to come in contact with a dye solution. This result is extremely significant in the context of understanding paper-based microfluidics, and the manner in which the fundamental understanding of the capillary imbibition phenomenon in a porous medium can be used to devise a paper-based microfluidic separator.

Mass transfer dominated by thermal diffusion in laminar boundary layers

1997 ◽  
Vol 336 ◽  
pp. 379-409 ◽  
Author(s):  
PEDRO L. GARCÍA-YBARRA ◽  
JOSE L. CASTILLO
Keyword(s):  
Mass Transport ◽  
Boundary Layers ◽  
Thermal Diffusion ◽  
Mass Fraction ◽  
Soret Effect ◽  
Second Order ◽  
Brownian Diffusion ◽  
Diffusion Transport ◽  
Laminar Boundary Layers ◽  
Fraction Distribution

The concentration distribution of massive dilute species (e.g. aerosols, heavy vapours, etc.) carried in a gas stream in non-isothermal boundary layers is studied in the large-Schmidt-number limit, Sc[Gt ]1, including the cross-mass-transport by thermal diffusion (Ludwig–Soret effect). In self-similar laminar boundary layers, the mass fraction distribution of the dilute species is governed by a second-order ordinary differential equation whose solution becomes a singular perturbation problem when Sc[Gt ]1. Depending on the sign of the temperature gradient, the solutions exhibit different qualitative behaviour. First, when the thermal diffusion transport is directed toward the wall, the boundary layer can be divided into two separated regions: an outer region characterized by the cooperation of advection and thermal diffusion and an inner region in the vicinity of the wall, where Brownian diffusion accommodates the mass fraction to the value required by the boundary condition at the wall. Secondly, when the thermal diffusion transport is directed away from the wall, thus competing with the advective transport, both effects balance each other at some intermediate value of the similarity variable and a thin intermediate diffusive layer separating two outer regions should be considered around this location. The character of the outer solutions changes sharply across this thin layer, which corresponds to a second-order regular turning point of the differential mass transport equation. In the outer zone from the inner layer down to the wall, exponentially small terms must be considered to account for the diffusive leakage of the massive species. In the inner zone, the equation is solved in terms of the Whittaker function and the whole mass fraction distribution is determined by matching with the outer solutions. The distinguished limit of Brownian diffusion with a weak thermal diffusion is also analysed and shown to match the two cases mentioned above.

Highly sinter-active nanocrystalline RE2O3 (RE = Gd, Eu, Dy) by a combustion process, and role of oxidant-to-fuel ratio in preparing their different crystallographic modifications

2007 ◽  
Vol 22 (3) ◽  
pp. 587-594 ◽  
Author(s):  
V. Bedekar ◽  
S.V. Chavan ◽  
A.K. Tyagi
Keyword(s):  
Combustion Process ◽  
Sintering Behavior ◽  
Stoichiometric Ratio ◽  
Monoclinic Modification ◽  
Fuel Ratio ◽  
Metal Nitrates ◽  
Powder Properties ◽  
Very High ◽  
Scanning Electron

Highly sinter-active powders of RE2O3 [rare earth (RE) = Gd, Eu, Dy] have been prepared using the corresponding metal nitrates as the oxidants, and glycine and citric acid as the fuels. Two different oxidant-to-fuel ratios, namely stoichiometric ratio and fuel-deficient ratio were used to explore the possibility of preparing different crystallographic modifications. By a careful control of oxidant-to-fuel ratio, nanocrystalline Eu2O3 and Gd2O3 could be prepared in cubic (C-type) as well as monoclinic (B-type) modifications. However, the high-temperature monoclinic modification could not be obtained for Dy2O3 due to a very high C-to-B-type phase transition temperature. The crystallite size, surface area, and sintering behavior were also studied for powders prepared using different oxidant-to-fuel ratios, and the results showed a remarkable correlation between different fuel contents and powder properties. Some of these powders resulted in pellets of nearly theoretical density. The sintered microstructure was studied by scanning electron microscopy.

scholarly journals Expanding the breadth of Medicare: learning from Australia

2018 ◽  
Vol 13 (3-4) ◽  
pp. 344-368 ◽  
Author(s):  
Stephen Duckett
Keyword(s):  
Health Care ◽  
Universal Coverage ◽  
Allied Health Professionals ◽  
Australian Health ◽  
Division Of Powers ◽  
Medicare Programme ◽  
High Level ◽  
Very High ◽  
Health Programmes

AbstractThe design of Australia’s Medicare programme was based on the Canadian scheme, adapted somewhat to take account of differences in the constitutional division of powers in the two countries and differences in history. The key elements are very similar: access to hospital services without charge being the core similarity, universal coverage for necessary medical services, albeit with a variable co-payment in Australia, the other. But there are significant differences between the two countries in health programmes – whether or not they are labelled as ‘Medicare’. This paper discusses four areas where Canada could potentially learn from Australia in a positive way. First, Australia has had a national Pharmaceutical Benefits Scheme for almost 70 years. Second, there have been hesitant extensions to Australia’s Medicare to address the increasing prevalence of people with chronic conditions – extensions which include some payments for allied health professionals, ‘care coordination’ payments, and exploration of ‘health care homes’. Third, Australia has a much more extensive system of support for older people to live in their homes or to move into supported residential care. Fourth, Australia has gone further in driving efficiency in the hospital sector than has Canada. Finally, the paper examines aspects of the Australian health care system that Canada should avoid, including the very high level of out-of-pocket costs, and the role of private acute inpatient provision.

Sign in / Sign up

Export Citation Format

Share Document