scholarly journals In-situ Experiments to Capture the Evolution of Microstructure During Phase Transformation of Titanium Under Dynamic Loading

2018 ◽  
Vol 183 ◽  
pp. 03020
Author(s):  
Benjamin M. Morrow ◽  
David R. Jones ◽  
Paulo A. Rigg ◽  
George T. Gray ◽  
Ellen K. Cerreta
Keyword(s):  
Phase Transformation ◽  
Dynamic Loading ◽  
Microstructural Analysis ◽  
Alpha Phase ◽  
Material Behavior ◽  
High Rate ◽  
Omega Phase ◽  
In Situ Experiments ◽  
Consistent Picture ◽  
Underlying Mechanisms

Under sufficient stresses, such as during dynamic loading, titanium experiences a phase transformation from hcp alpha phase to hexagonal omega phase. Omega phase is often retained in the microstructure after unloading, and has a strong influence on subsequent mechanical properties. Simulations suggest there are multiple pathways and underlying mechanisms for this transformation. Due to the incredibly short timescales involved, experimental measurements for model validation have been difficult. However, new capabilities at the Advanced Photon Source have enabled diffraction measurements during plate impact experiments to study the evolution of titanium during transformation. These high-rate data allow us to probe the mechanism and kinetics of phase transformations in new ways. Recent results will be presented and compared to post-mortem characterization of soft-recovered shocked specimens. Comparisons are made with previous tests where material was shock-loaded and soft recovered for microstructural analysis. Together these techniques create a consistent picture of material behavior during the shock-induced ff–! phase transformation in titanium.

scholarly journals Shock-reshock of zirconium to explore the effect of microstructure on the alpha-omega phase transformation

2021 ◽  
Vol 250 ◽  
pp. 03010
Author(s):  
Benjamin M. Morrow ◽  
Juan P. Escobedo-Diaz ◽  
David R. Jones ◽  
Carl P. Trujillo ◽  
Daniel T. Martinez ◽  
...  
Keyword(s):  
Phase Transformation ◽  
Phase Field ◽  
Electron Backscatter Diffraction ◽  
Peak Stress ◽  
Relative Activity ◽  
Material Behavior ◽  
Omega Phase ◽  
Orientation Relationships ◽  
Final Microstructure ◽  
Backscatter Diffraction

Phase transformations play an important role in the mechanical behavior of materials subjected to extreme loading conditions. A series of shock-reshock experiments were fielded to determine whether the phase transitions in materials are significantly enhanced or inhibited by preexisting microstructural features. Polycrystalline zirconium samples were shock loaded using gas-gun plate impact and soft recovered to examine microstructure using electron backscatter diffraction (EBSD). Drive conditions were varied to study the (hcp) alpha to (hexagonal) omega solidsolid phase transformation. Recovered samples were then subjected to a second shock loading event to determine the change in material behavior as a function of pre-shock microstructure. Crystallography of phase fragments in the final microstructure showed that prior twinning (formed during the shock to a peak stress below the transition threshold) appeared to suppress omega formation/retention after reshock. Conversely, when a material was initially shocked into the omega phase field, retained-omega was not found to have a large impact on subsequent omega formation during reshock. This suggests that nucleation and growth of omega phase are important processes, and the relative activity of nucleation vs. growth processes is modified by a pre-existing substructure. Additionally, orientation relationships reveal a reverse transformation pathway (omega to alpha) dominates the final microstructure, suggesting significant grain growth in the omega phase field is possible even for dynamic timescales.

Decomposition of the metastable beta titanium alloy Ti-15-3

1983 ◽  
Vol 41 ◽  
pp. 264-265
Author(s):  
Y. L. Chen ◽  
S. Fujlshiro
Keyword(s):  
Low Cost ◽  
High Strength ◽  
Alpha Phase ◽  
Thick Sheet ◽  
Omega Phase ◽  
Beta Titanium Alloy ◽  
Beta Titanium ◽  
Beta Matrix ◽  
Metastable Beta ◽  
Very High

Metastable beta titanium alloys have been known to have numerous advantages such as cold formability, high strength, good fracture resistance, deep hardenability, and cost effectiveness. Very high strength is obtainable by precipitation of the hexagonal alpha phase in a bcc beta matrix in these alloys. Precipitation hardening in the metastable beta alloys may also result from the formation of transition phases such as omega phase. Ti-15-3 (Ti-15V- 3Cr-3Al-3Sn) has been developed recently by TIMET and USAF for low cost sheet metal applications. The purpose of the present study was to examine the aging characteristics in this alloy.The composition of the as-received material is: 14.7 V, 3.14 Cr, 3.05 Al, 2.26 Sn, and 0.145 Fe. The beta transus temperature as determined by optical metallographic method was about 770°C. Specimen coupons were prepared from a mill-annealed 1.2 mm thick sheet, and solution treated at 827°C for 2 hr in argon, then water quenched. Aging was also done in argon at temperatures ranging from 316 to 616°C for various times.

scholarly journals Characteristics of intracerebral haemorrhage associated with COVID-19: a systematic review and pooled analysis of individual patient and aggregate data

2021 ◽  
Author(s):  
R. Beyrouti ◽  
J. G. Best ◽  
A. Chandratheva ◽  
R. J. Perry ◽  
D. J. Werring
Keyword(s):  
Intracerebral Haemorrhage ◽  
Pooled Analysis ◽  
Aggregate Data ◽  
High Rate ◽  
Individual Data ◽  
Aggregate Level ◽  
Level Data ◽  
Pooled Prevalence ◽  
Underlying Mechanisms ◽  
Different Characteristics

Abstract Background and purpose There are very few studies of the characteristics and causes of ICH in COVID-19, yet such data are essential to guide clinicians in clinical management, including challenging anticoagulation decisions. We aimed to describe the characteristics of spontaneous symptomatic intracerebral haemorrhage (ICH) associated with COVID-19. Methods We systematically searched PubMed, Embase and the Cochrane Central Database for data from patients with SARS-CoV-2 detected prior to or within 7 days after symptomatic ICH. We did a pooled analysis of individual patient data, then combined data from this pooled analysis with aggregate-level data. Results We included data from 139 patients (98 with individual data and 41 with aggregate-level data). In our pooled individual data analysis, the median age (IQR) was 60 (53–67) years and 64% (95% CI 54–73.7%) were male; 79% (95% CI 70.0–86.9%) had critically severe COVID-19. The pooled prevalence of lobar ICH was 67% (95% CI 56.3–76.0%), and of multifocal ICH was 36% (95% CI 26.4–47.0%). 71% (95% CI 61.0–80.4%) of patients were treated with anticoagulation (58% (95% CI 48–67.8%) therapeutic). The median NIHSS was 28 (IQR 15–28); mortality was 54% (95% CI 43.7–64.2%). Our combined analysis of individual and aggregate data showed similar findings. The pooled incidence of ICH across 12 cohort studies of inpatients with COVID-19 (n = 63,390) was 0.38% (95% CI 0.22–0.58%). Conclusions Our data suggest that ICH associated with COVID-19 has different characteristics compared to ICH not associated with COVID-19, including frequent lobar location and multifocality, a high rate of anticoagulation, and high mortality. These observations suggest different underlying mechanisms of ICH in COVID-19 with potential implications for clinical treatment and trials.

Ultrasonic study of the beta → omega phase transformation in Zr-Nb alloys

1972 ◽  
Vol 20 (5) ◽  
pp. 725-733 ◽  
Author(s):  
G Goasdoue ◽  
P.S Ho ◽  
S.L Sass
Keyword(s):  
Phase Transformation ◽  
Omega Phase ◽  
Ultrasonic Study

scholarly journals Effect of Al on ω phase transformation behavior in Ti-8V-5Fe-(1-3)Al alloy

1996 ◽  
Vol 37 (4) ◽  
pp. 855-859 ◽  
Author(s):  
Katsumi Yamada ◽  
Atsushi Ogawa ◽  
Chiaki Ouchi ◽  
Daniel Eylon
Keyword(s):  
Phase Transformation ◽  
Al Alloy ◽  
Omega Phase ◽  
Transformation Behavior ◽  
Phase Transformation Behavior

Hot working of SP-700 titanium alloy with lamellar α + β starting structure using a processing map

2020 ◽  
Vol 111 (4) ◽  
pp. 297-306
Author(s):  
Amir Hosein Sheikhali ◽  
Maryam Morakkabati
Keyword(s):  
Titanium Alloy ◽  
Strain Rate ◽  
Hot Deformation ◽  
Processing Map ◽  
Microstructural Analysis ◽  
Shear Bands ◽  
Alpha Phase ◽  
Strain Rates ◽  
Compression Tests ◽  
Temperature Range

Abstract In this study, hot deformation behavior of SP-700 titanium alloy was investigated by hot compression tests in the temperature range of 700-9508C and at strain rates of 0.001, 0.1, and 1 s-1. Final mechanical properties of the alloy (hot compressed at different strain rates and temperatures) were investigated using a shear punch testing method at room temperature. The flow curves of the alloy indicated that the yield point phenomenon occurs in the temperature range of 800- 9508C and strain rates of 0.1 and 1 s-1. The microstructural analysis showed that dynamic globularization of the lamellar α phase starts at 7008C and completes at 8008C. The alpha phase was completely eliminated from b matrix due to deformation- induced transformation at 8508C. The microstructure of specimens compressed at 8508C and strain rates of 0.001 and 0.1 s-1showed the serration of beta grain boundaries, whereas partial dynamic recrystallization caused a necklace structure by increasing strain rate up to 1 s-1. The specimen deformed at 7008C and strain rate of 1 s-1was located in the instability region and localized shear bands formed due to the low thermal conductivity of the alloy. The processing map of the alloy exhibited a peak efficiency domain of 54% in the temperature range of 780-8108C and strain rates of 0.001- 0.008 s-1. The hot deformation activation energy of the alloy in the α/β region (305.5 kJ mol-1) was higher than that in the single-phase β region (165.2 kJ mol-1) due to the dynamic globularization of the lamellar a phase.

Sign in / Sign up

Export Citation Format

Share Document