scholarly journals Tracking system performance of the BM@N experiment

2019 ◽  
Vol 214 ◽  
pp. 02021
Author(s):  
Mikhail Kapishin ◽  
Vasilisa Lenivenko ◽  
Vladimir Palichik ◽  
Gleb Pokatashkin ◽  
Igor Rufanov ◽  
...  

The Baryonic Matter at Nuclotron (BM@N) experiment represents the first phase of the Nuclotron-based Ion Collider Facility (NICA), a mega-science project at the Joint Institute for Nuclear Research. It is a fixed target experiment built for studying nuclear matter in conditions of extreme density and temperature. The tracking system of the BM@N experiment consists of three main detector systems: Multiwire Proportional Chambers situated before the magnet, Gas Electron Multipliers placed inside the magnet and Drift Chambers placed after the magnet. These systems provide the reconstruction of charged particles’ trajectories and their momentum in the magnetic field. This information is further used by Time of Flight detectors for the particle identification procedure. The system’s performance is reviewed and the spatial resolutions along with efficiencies of the detectors are estimated using the data collected in the recent physics runs of the Nuclotron.

2019 ◽  
Vol 214 ◽  
pp. 05027 ◽  
Author(s):  
Pavel Batyuk ◽  
Konstantin Gertsenberger ◽  
Sergey Merts ◽  
Oleg Rogachevsky

A new generation of experiments for the relativistic nuclear physics is expected to be started up in the nearest years at the Nuclotron-based Ion Collider fAcility (NICA) under construction at the Joint Institute for Nuclear Research in Dubna. The main part of the facility is the essentially modernized accelerator Nuclotron. BM@N (Baryonic Matter at Nuclotron) is considered as a first stage towards realization of physics program available at NICA. It is a fixed target experiment aimed to work with the Nuclotron extracted beams of different species. The experiment had a set of technical runs since 2015. For a successful realization of the BM@N physics program, a well developed and tested software for simulation, digitization, reconstruction and analysis of collision events and other additional tasks is of utmost importance. The BmnRoot software developed in order to operate the mentioned tasks is described in this article. It includes modules for data digitizing obtained from BM@N detector systems, realistic simulation of signals in detectors, alignment of detectors, reconstruction of multiparticle interaction events, as well as all necessary systems for maintaining the databases of the experiment, visualization and providing information support for the experiment.


2018 ◽  
Vol 177 ◽  
pp. 04004
Author(s):  
Sergei Bazylev ◽  
Mikhail Kapishin ◽  
Kacper Kapusniak ◽  
Vladimir Karjavine ◽  
Sergei Khabarov ◽  
...  

BM@N is the fixed target experiment at the accelerator complex NICA-Nuclotron aimed to study nuclear matter in the relativistic heavy ion collisions. Triple-GEM detectors were identified as appropriate for the BM@N tracking system located inside the analyzing magnet. Seven GEM chambers are integrated into the BM@N experimental setup and data acquisition system. GEM construction, main characteristics and first obtained results of the GEM tracking system performance in the technical run with the deuteron beam are shortly reviewed.


2019 ◽  
Vol 204 ◽  
pp. 07009 ◽  
Author(s):  
A. Galavanov ◽  
M. Kapishin ◽  
K. Kapusniak ◽  
V. Karjavine ◽  
S. Khabarov ◽  
...  

BM@N (Baryonic Matter at the Nuclotron) is a fixed target experiment aimed to study nuclear matter in the relativistic heavy-ion collisions at the Nuclotron accelerator in JINR. The BM@N tracking system is based on Gas Electron Multipliers (GEM) detectors mounted inside the BM@N analyzing magnet. The Cathode Strip Chamber (CSC) is installed outside the magnet. The CSC is used for improvement of particles momentum identification. The structure of the GEM detectors and the CSC prototype and the results of study of their characteristics are presented. The GEM detectors and CSC are integrated into the BM@N experimental setup and data acquisition system. The results of first tests of the GEM tracking system and CSC in last runs are shortly reviewed.


2020 ◽  
Vol 35 (34n35) ◽  
pp. 2044020
Author(s):  
I. Köseoglu

The PANDA experiment at the future Facility for Antiproton and Ion Research (FAIR) in Darmstadt/Germany aims to investigate fundamental questions of hadron physics. PANDA is designed as a fixed-target experiment for an antiproton beam with a momentum range of 1.5 GeV/[Formula: see text] to 15 GeV/[Formula: see text]. In order to obtain an excellent particle identification of pions and kaons, two independent DIRC detectors have been developed for two adjacent spatial regions. The Barrel DIRC covers polar angles from [Formula: see text]–[Formula: see text] and performs [Formula: see text] separation with [Formula: see text] or more for momenta from 0.5 to 3.5 GeV/[Formula: see text]. The novel Endcap Disc DIRC (EDD) detector will cover the forward polar angles between [Formula: see text] and [Formula: see text] and will provide a [Formula: see text] separation from 0.5 GeV/[Formula: see text] up to 4 GeV/[Formula: see text] with a separation power at least [Formula: see text]. The design of the Barrel DIRC is based on the successful BaBar DIRC and the SuperB FDIRC R&D with several improvements to optimize the performance for PANDA. Both PANDA DIRC detectors use synthetic fused silica as material for radiators and light guides and lifetime-enhance Microchannel Plate PMTs (MCP-PMTs) as sensors. The Barrel DIRC uses narrow bars as a radiator, a prism-shaped expansion volume and a complex multi-layer spherical lens as focusing system. The Cherenkov radiator for the EDD is a large, 2 cm thick fused silica plate that is divided into four identical quadrants. A combination of bars and cylindrical elements with aluminum coating focus the Cherenkov light on the MCP-PMTs with segmented anode plates. The technical design of the two DIRC detectors and the performance of prototypes, tested in a mixed hadron beam at CERN, will be discussed.


2018 ◽  
Vol 177 ◽  
pp. 05001 ◽  
Author(s):  
Konstantin Gertsenberger ◽  
Oleg Rogachevsky

The article describes the developed Unified Database designed as a comprehensive relational data storage for the BM@N experiment at the Joint Institute for Nuclear Research in Dubna. The BM@N experiment, which is one of the main elements of the first stage of the NICA project, is a fixed target experiment at extracted Nuclotron beams of the Laboratory of High Energy Physics (LHEP JINR). The structure and purposes of the BM@N setup are briefly presented. The article considers the scheme of the Unified Database, its attributes and implemented features in detail. The use of the developed BM@N database provides correct multi-user access to actual information of the experiment for data processing. It stores information on the experiment runs, detectors and their geometries, different configuration, calibration and algorithm parameters used in offline data processing. An important part of any database - user interfaces are presented.


2020 ◽  
Vol 226 ◽  
pp. 03008
Author(s):  
Konstantin Gertsenberger ◽  
Sergey Merts ◽  
Ilnur Gabdrakhmanov ◽  
Irina Filozova ◽  
Igor Alexandrov ◽  
...  

A new generation of experiments on relativistic nuclear physics is planned to be started in the nearest years at the Nuclotron-based Ion Collider facility (NICA) under construction at the Joint Institute for Nuclear Research in Dubna. The fixed target experiment BM@N (Baryonic Matter at Nuclotron) is considered as a first stage towards the implementation of the physics program available at NICA. For a successful accomplishment of the BM@N physics program, a well-developed and tested software package for simulation, digitization, reconstruction and analysis of collision events and other supporting tasks is of utmost importance. The data flow scheme of the experiment is shown. Offine and online software systems, such as the main BmnRoot framework, databases of the experiment, data monitoring and others providing information support for the experiment are presented. The implementation of the software systems is a necessary stage for the successful operation of the BM@N experiment.


2019 ◽  
Vol 64 (7) ◽  
pp. 640 ◽  
Author(s):  
M. Schmidt

PANDA is a fixed-target experiment that is going to address a wide range of open questions in the hadron physics sector by studying the interactions between antiprotons with high momenta and a stationary proton target. The PANDA detector is currently under construction and will be situated in the HESR that is a part of the future FAIR accelerator complex on the area of the GSI Helmholtzzentrum f¨ur Schwerionenforschung in Darmstadt. The key features of the detector are: the precise tracking in strong magnetic fields, excellent particle identification, and high-resolution calorimeters.


2014 ◽  
Vol 45 (1) ◽  
pp. 336-337 ◽  
Author(s):  
A. Rakotozafindrabe ◽  
M. Anselmino ◽  
R. Arnaldi ◽  
S. J. Brodsky ◽  
V. Chambert ◽  
...  

2015 ◽  
Vol 2015 ◽  
pp. 1-15 ◽  
Author(s):  
L. Massacrier ◽  
B. Trzeciak ◽  
F. Fleuret ◽  
C. Hadjidakis ◽  
D. Kikola ◽  
...  

Being used in the fixed-target mode, the multi-TeV LHC proton and lead beams allow for studies of heavy-flavour hadroproduction with unprecedented precision at backward rapidities, far negative Feynman-x, using conventional detection techniques. At the nominal LHC energies, quarkonia can be studied in detail inp+p,p+d, andp+Acollisions atsNN≃115 GeV and in Pb +pand Pb +Acollisions atsNN≃72 GeV with luminosities roughly equivalent to that of the collider mode that is up to 20 fb−1 yr−1inp+pandp+dcollisions, up to 0.6 fb−1 yr−1inp+Acollisions, and up to 10 nb−1 yr−1in Pb +Acollisions. In this paper, we assess the feasibility of such studies by performing fast simulations using the performance of a LHCb-like detector.


2013 ◽  
Author(s):  
Jean-Philippe Lansberg ◽  
Valérie Chambert ◽  
Jean-Pierre Didelez ◽  
Bernard Genolini ◽  
Cynthia Hadjidakis ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document