scholarly journals Experimental evaluation of Tusi couple based energy harvester for scavenging power from human motion

2018 ◽  
Vol 211 ◽  
pp. 05004
Author(s):  
Jan Smilek ◽  
Zdenek Hadas
Keyword(s):  
Output Power ◽  
Energy Harvester ◽  
Electronic Devices ◽  
Low Frequency ◽  
Human Motion ◽  
Single Measurement ◽  
Average Output ◽  
Wearable Electronic ◽  
Wearable Electronic Devices ◽  
Inertial Energy

This paper deals with the experimental performance evaluation of the prototype of a novel inertial energy harvester based on Tusi couple mechanism. The harvester was developed as an autonomous power source for environments with very low frequency and magnitude of mechanical vibrations available. The experiments were conducted using human body during different activities as a source of mechanical excitation, with the prospect of using the harvester for powering up future wearable electronic devices. Four different locations on a single measurement specimen were picked for the harvester placement - back of the head, belt, wrist and ankle. Measurements in each location comprised of walking on a straight and level path at natural speed, walking up and down the stairs, jumping, running, and location-specific activities that were expected to provide significant output power. The measured average output power of the device with dimensions 50x50x20 mm on empirically selected 2 kΩ electrical load reached up to 6.5 mW, obtained with the device attached to the ankle while shaking the leg.

scholarly journals Fabrication of circuits by multi-nozzle electrohydrodynamic inkjet printing for soft wearable electronics

2021 ◽  
Author(s):  
Arshad Khan ◽  
Khalid Rahman ◽  
Shawkat Ali ◽  
Saleem Khan ◽  
Bo Wang ◽  
...  
Keyword(s):  
Inkjet Printing ◽  
Mechanical Stability ◽  
Thermoplastic Polyurethane ◽  
Electronic Devices ◽  
Human Motion ◽  
Wearable Electronics ◽  
Counter Electrodes ◽  
Electric Circuits ◽  
Wearable Electronic ◽  
Wearable Electronic Devices

Abstract Wearable electronic devices are evolving from current rigid configurations to flexible and ultimately stretchable structures. These emerging systems require soft circuits for connecting the various working units of the overall system. This paper presents fabrication of soft circuits by electrohydrodynamic (EHD) inkjet-printing technique. Multi-nozzle EHD printing head is employed for rapid fabrication of electric circuits on a wide set of materials, including glass substrate (rigid), flexible polyethylene terephthalate (PET) films, and stretchable thermoplastic polyurethane (TPU) films. To avoid the effects of substrate materials on the jettability, the proposed multi-nozzle head is equipped with integrated individual counter electrodes (electrodes are placed above the printing substrate). High-resolution circuits (50 ± 5 µm) with high electrical conductivity (0.6 Ω □−1) on soft substrate materials validate our well-controlled multi-nozzle EHD printing approach. The produced circuits showed excellent flexibility (bending radius ≈ 5 mm radius), high stretchability (strain ≈ 100%), and long-term mechanical stability (500 cycles at 30% strain). The concept is further demonstrated with a soft strain sensor based on a multi-nozzle EHD-printed circuit, employed for monitoring the human motion (finger bending), indicating the potential applications of these circuits in soft wearable electronic devices. Graphic Abstract

Application of flexible friction nano-generator in human motion information acquisition

2021 ◽  
pp. 1-13
Author(s):  
Leilei Tian ◽  
Cunjun Xie ◽  
Ying Jin
Keyword(s):  
Information Acquisition ◽  
Short Circuit ◽  
Electronic Devices ◽  
Short Circuit Current ◽  
Human Motion ◽  
Open Circuit ◽  
Motion Information ◽  
Negative Materials ◽  
Wearable Electronic ◽  
Wearable Electronic Devices

Under the background of the wide application of intelligent wearable devices, the application of flexible friction nanogenerator in human motion information acquisition is studied. According to the actual needs of energy supply of wearable electronic devices and human motion information acquisition, a flexible friction nanogenerator was prepared by using polyester fiber nickel plated conductive cloth and room temperature vulcanized silica gel polymer as friction positive and negative materials for human motion information acquisition. Set relevant parameters for test. The output peaks of short-circuit current and open circuit voltage are 5 respectively μA and 50 V. The test shows that the output energy can drive the calculator and digital clock to work in real time, and can realize the collection of human motion information.

Characteristics of Discharge Currents Measured through Body-Attached Metal for Modeling ESD from Wearable Electronic Devices

2016 ◽  
Vol E99.B (1) ◽  
pp. 186-191 ◽  
Author(s):  
Takeshi ISHIDA ◽  
Fengchao XIAO ◽  
Yoshio KAMI ◽  
Osamu FUJIWARA ◽  
Shuichi NITTA
Keyword(s):  
Electronic Devices ◽  
Wearable Electronic ◽  
Wearable Electronic Devices

scholarly journals Recent Progress of Fluxgate Magnetic Sensors: Basic Research and Application

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1500
Author(s):  
Songrui Wei ◽  
Xiaoqi Liao ◽  
Han Zhang ◽  
Jianhua Pang ◽  
Yan Zhou
Keyword(s):  
Recent Progress ◽  
Electronic Devices ◽  
Basic Research ◽  
Research Direction ◽  
Magnetic Sensor ◽  
Magnetic Sensors ◽  
Future Research ◽  
Calibration Methods ◽  
Wearable Electronic ◽  
Wearable Electronic Devices

Fluxgate magnetic sensors are especially important in detecting weak magnetic fields. The mechanism of a fluxgate magnetic sensor is based on Faraday’s law of electromagnetic induction. The structure of a fluxgate magnetic sensor mainly consists of excitation windings, core and sensing windings, similar to the structure of a transformer. To date, they have been applied to many fields such as geophysics and astro-observations, wearable electronic devices and non-destructive testing. In this review, we report the recent progress in both the basic research and applications of fluxgate magnetic sensors, especially in the past two years. Regarding the basic research, we focus on the progress in lowering the noise, better calibration methods and increasing the sensitivity. Concerning applications, we introduce recent work about fluxgate magnetometers on spacecraft, unmanned aerial vehicles, wearable electronic devices and defect detection in coiled tubing. Based on the above work, we hope that we can have a clearer prospect about the future research direction of fluxgate magnetic sensor.

Engineering flexible carbon nanofibers concatenated MOFs-derived hollow octahedral CoFe2O4 as anode materials for enhanced lithium storage

2021 ◽  
Author(s):  
Fangfang Xue ◽  
Yangyang Li ◽  
Chen Liu ◽  
Zhigang Zhang ◽  
Jun Lin ◽  
...  
Keyword(s):  
Mechanical Property ◽  
Anode Materials ◽  
Electrode Materials ◽  
Electronic Devices ◽  
High Capacity ◽  
Lithium Ion ◽  
Lithium Storage ◽  
Excellent Mechanical Property ◽  
Wearable Electronic ◽  
Wearable Electronic Devices

Constructing suitable electrode materials with high capacity and excellent mechanical property is indispensable for flexible lithium-ion batteries (LIBs) to satisfy the growing flexible and wearable electronic devices. Herein, a necklace-like...

scholarly journals Study of the Properties of a Hybrid Piezoelectric and Electromagnetic Energy Harvester for a Civil Engineering Low-Frequency Sloshing Environment

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 391
Author(s):  
Nan Wu ◽  
Yuncheng He ◽  
Jiyang Fu ◽  
Peng Liao
Keyword(s):  
Output Power ◽  
Energy Harvester ◽  
Civil Engineering ◽  
Maximum Output Power ◽  
Low Frequency ◽  
Electromagnetic Energy ◽  
Maximum Output ◽  
Piezoelectric Film ◽  
Hybrid Energy ◽  
Level Height

In this paper a novel hybrid piezoelectric and electromagnetic energy harvester for civil engineering low-frequency sloshing environment is reported. The architecture, fabrication and characterization of the harvester are discussed. The hybrid energy harvester is composed of a permanent magnet, copper coil, and PVDF(polyvinylidene difluoride) piezoelectric film, and the upper U-tube device containing a cylindrical fluid barrier is connected to the foundation support plate by a hinge and spring. The two primary means of energy collection were through the vortex street, which alternately impacted the PVDF piezoelectric film through fluid shedding, and the electromotive force (EMF) induced by changes in the magnetic field position in the conducting coil. Experimentally, the maximum output power of the piezoelectric transformer of the hybrid energy harvester was 2.47 μW (circuit load 270 kΩ; liquid level height 80 mm); and the maximum output power of the electromagnetic generator was 2.72 μW (circuit load 470 kΩ; liquid level height 60 mm). The low-frequency sloshing energy collected by this energy harvester can drive microsensors for civil engineering monitoring.

scholarly journals Textile-Based Triboelectric Nanogenerators for Wearable Self-Powered Microsystems

Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 158
Author(s):  
Peng Huang ◽  
Dan-Liang Wen ◽  
Yu Qiu ◽  
Ming-Hong Yang ◽  
Cheng Tu ◽  
...  
Keyword(s):  
Rapid Development ◽  
Electronic Devices ◽  
Quantitative Relationship ◽  
Triboelectric Nanogenerator ◽  
Output Performance ◽  
Integrated Microsystems ◽  
Wearable Electronic ◽  
Self Powered ◽  
Representative Work ◽  
Wearable Electronic Devices

In recent years, wearable electronic devices have made considerable progress thanks to the rapid development of the Internet of Things. However, even though some of them have preliminarily achieved miniaturization and wearability, the drawbacks of frequent charging and physical rigidity of conventional lithium batteries, which are currently the most commonly used power source of wearable electronic devices, have become technical bottlenecks that need to be broken through urgently. In order to address the above challenges, the technology based on triboelectric effect, i.e., triboelectric nanogenerator (TENG), is proposed to harvest energy from ambient environment and considered as one of the most promising methods to integrate with functional electronic devices to form wearable self-powered microsystems. Benefited from excellent flexibility, high output performance, no materials limitation, and a quantitative relationship between environmental stimulation inputs and corresponding electrical outputs, TENGs present great advantages in wearable energy harvesting, active sensing, and driving actuators. Furthermore, combined with the superiorities of TENGs and fabrics, textile-based TENGs (T-TENGs) possess remarkable breathability and better non-planar surface adaptability, which are more conducive to the integrated wearable electronic devices and attract considerable attention. Herein, for the purpose of advancing the development of wearable electronic devices, this article reviews the recent development in materials for the construction of T-TENGs and methods for the enhancement of electrical output performance. More importantly, this article mainly focuses on the recent representative work, in which T-TENGs-based active sensors, T-TENGs-based self-driven actuators, and T-TENGs-based self-powered microsystems are studied. In addition, this paper summarizes the critical challenges and future opportunities of T-TENG-based wearable integrated microsystems.

Sign in / Sign up

Export Citation Format

Share Document