13 New Innovative Applications of Femtosecond Laser Technology

2021 ◽  
Vol 7 (2) ◽  
pp. 713-716
Author(s):  
Swen Grossmann ◽  
Sabine Illner ◽  
Robert Ott ◽  
Grit Rhinow ◽  
Carsten Tautorat ◽  
...  

Abstract Bioresorbable nanofiber nonwovens with their fascinating properties provide a wide range of potential biomedical applications. Modification of the material enables the adjustment of mechanical and biological characteristics depending on the desired application. Due to the nanosized fiber network, post-production structuring is very challenging. Within this study, we use femtosecond laser technology for structuring permeable and resorbable electrospun poly-L-lactide (PLLA) membranes. We show that this post-production process can be used without disturbing the fiber network near the structured areas. Furthermore, the modification of the water permeability and mechanical characteristics due to the laser structuring was investigated. The results prove femtosecond laser technology to be a promising method for the adjustment of the membrane properties and which in consequence can help to optimize cell adhesion, enable revascularization and open up applications of nanofiber membranes in personalized medicine.


2016 ◽  
pp. 697 ◽  
Author(s):  
Thais Maria Pinheiro Callou ◽  
Renato Garcia ◽  
Adriana Mukai ◽  
Samir Bechara ◽  
Natalia Giacomin ◽  
...  

2012 ◽  
Vol 28 (12) ◽  
pp. 912-920 ◽  
Author(s):  
George D. Kymionis ◽  
Vardhaman P. Kankariya ◽  
Argyro D. Plaka ◽  
Dan Z. Reinstein

2019 ◽  
Vol 30 (4) ◽  
pp. 668-675
Author(s):  
Cristina Peris-Martínez ◽  
Cristina Dualde-Beltrán ◽  
Ester Fernández-López ◽  
Maria José Roig-Revert ◽  
Mikhail Hernández-Díaz ◽  
...  

Purpose: To analyze the impact of the depth of implantation of intracorneal ring segments on morphological, biomechanical, and clinical outcomes in ectatic corneas. Methods: This prospective longitudinal study enrolled 40 eyes of 29 patients (age 20–51 years) with corneal ectasia that underwent intracorneal ring segments implantation (KeraRing, Mediphacos). Changes in visual acuity, refraction, corneal tomography, and corneal biomechanics (Ocular Response Analyzer, Reichert) were evaluated during a 6 month follow-up. Likewise, changes in ring segment implantation depth measured by optical coherence tomography (Visante OCT, Carl Zeiss Meditec) were also evaluated. Results: Mean relative depth of implantation was 71.6 ± 5.8%, 71.5 ± 6.5%, and 71.9 ± 6.3% at 1, 3, and 6 months after surgery, respectively (p = 0.827). The difference between the real relative depth of implantation and the theoretical attempted value of 70% was not statistically significant (p = 0.072). Differences in spherical equivalent during the follow-up changed significantly depending on the level of relative depth of implantation (p = 0.036), with an increase of 0.114 D per each 1% increase in relative depth of implantation. Likewise, a decrease of –0.194 D in the steepest keratometric reading was found per each decrease of 1% in relative depth of implantation (p = 0.026). Changes in corneal thickness (p = 0.092) and biomechanics (p = 0.080) were not related to relative depth of implantation. Conclusion: The effect on visual acuity and refraction of intracorneal ring segments when implanted in corneal ectasia is less clinically relevant when the implantation is done at a very deep plane. The variability of the depth of intracorneal ring segments implantation when using femtosecond laser technology is minimal and with no clinically significant effect on clinical outcomes.


2014 ◽  
Vol 2014 ◽  
pp. 1-4
Author(s):  
E. A. Razgulyaeva

For laser-assisted in situ keratomileusis (LASIK) retreatments with a previous unsuccessful mechanical microkeratome-assisted surgery, some surgical protocols have been described as feasible, such as relifting of the flap or the creation of a new flap and even the change to a surface ablation procedure (photorefractive keratectomy (PRK)). This case shows the use of femtosecond technology for the creation of a secondary flap to perform LASIK in a cornea with a primary incomplete flap obtained with a mechanical microkeratome. As we were unable to characterize the interface of the first partial lamellar cut, a thick flap was planned and created using a femtosecond laser platform. As the primary cut was very thick in the nasal quadrant, a piece of loose corneal tissue appeared during flap lifting which was fitted in its position and not removed. Despite this condition and considering the regularity of the new femtosecond laser cut, the treatment was uneventful. This case report shows the relevance of a detailed corneal analysis with an advanced imaging technique before performing a secondary flap in a cornea with a primary incomplete flap. The femtosecond laser technology seems to be an excellent tool to manage such cases successfully.


2009 ◽  
Vol 3 (2) ◽  
pp. 151-156 ◽  
Author(s):  
Atsushi Mitani ◽  
◽  
Shinichi Hirai ◽  

Femtosecond laser technology forms minute, stable gratings on such materials as silicon and stainless steel. Forming a periodic structure on the surfaces of sliding parts improves tribology characteristics because adhesion decreases with reductions in area of contact. Double-pulsed femtosecond laser irradiation generates periodic structures with asymmetric profiles, along which, as we have shown elsewhere, microparts such as ceramic chip capacitors and resistors can be fed using simple symmetric planar vibration. Microparts move unidirectionally because they adhere to these surfaces asymmetrically. In testing the feasibility of feeding 0402 capacitors 0.4 × 0.2 × 0.2 mm in size and 0.1 mg weighting along an asymmetric surface fabricated using double-pulsed femtosecond laser irradiation, we evaluated differences in the profiles of the two inclined surfaces, effects of decreased adhesion, the forward and backward coefficient of friction, and the bidirectional friction angle of 0402 capacitors. Based on feed experimental results, we assessed the relationship between drive frequency and feed velocity and, by calculating variations in feed velocity, feed stability.


2009 ◽  
Vol 50 (11) ◽  
pp. 5159 ◽  
Author(s):  
Mohammad Abahussin ◽  
Sally Hayes ◽  
Nathaniel E. Knox Cartwright ◽  
Christina S. Kamma-Lorger ◽  
Yasir Khan ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document