Molecular Weight Determinations Of Low Molecular Weight (LMW) Heparins By Ultracentrifugation And High Pressure Liquid Chromatography

1981 ◽  
Author(s):  
Grant Barlow ◽  
N Sugisaka ◽  
F J Petracek

Molecular weights were independently determined on nitrous acid depolymerized LMW heparin fractions ranging from 2-15 daltons using the analytical ultracentrifuge and high pressure liquid chromatography (HPLC).Sedimentation-diffusion equilibria were obtained in the analytical ultracentrifuge using speeds ranging from 20,000 to 56,000 rpm. Near theta conditions were obtained using 0.5M NaCl as the solvent. Calculations of molecular weight distributions and, from those figures, weight average molecular weights were made using the method described by Scholte (N.Y. Acad Sci. 164, 156, 1969). The results show that weight average values as low as 2,000 daltons can be determined.Sedimentation-diffusion equilibria were obtained in the analytical ultracentrifuge using speeds ranging from 20,000 to 56,000 rpm. Near theta conditions were obtained using 0.5M NaCl as the solvent. Calculations of molecular weight distributions and, from those figures, weight average molecular weights were made using the method described by Scholte (N.Y. Acad Sci. 164, 156, 1969). The results show that weight average values as low as 2,000 daltons can be determined.The HPLC results were obtained using previously described methods (Fed Proc. 36, 89, 1977) and a new highly efficient gel column (TSK gels). Fractionated dextrans were used as reference standards.

1973 ◽  
Vol 51 (2) ◽  
pp. 288-291 ◽  
Author(s):  
Claude Roux ◽  
Hubert Daoust

Diolefins, produced by thermal dehydration of disubstituted allyl alcohols in a static system, polymerize as they are formed giving low molecular weight polymers. The microstructure of the product is similar to that of thermal polymers of 1,3-dienes. Number- and weight-average molecular weights, partial specific volumes, and molecular weight distributions have been studied for the polymers obtained from 3-methyl-2-butene-1-ol and 3,3-dimethyl-allyl alcohol.


2007 ◽  
Vol 60 (10) ◽  
pp. 788 ◽  
Author(s):  
Markus Busch ◽  
Marion Roth ◽  
Martina H. Stenzel ◽  
Thomas P. Davis ◽  
Christopher Barner-Kowollik

Simulations are employed to establish the feasibility of achieving controlled/living ethene polymerizations. Such simulations indicate that reversible addition–fragmentation chain transfer (RAFT) agents carrying a fluorine Z group may be suitable to establish control in high-pressure high-temperature ethene polymerizations. Based on these simulations, specific fluorine (F-RAFT) agents have been designed and tested. The initial results are promising and indicate that it may indeed be possible to achieve molecular weight distributions with a polydispersity being significantly lower than that observed in the conventional free radical process. In our initial trials presented here (using the F-RAFT agent isopropylfluorodithioformate), a correlation between the degree of polymerization and conversion can indeed be observed. Both the lowered polydispersity and the linear correlation between molecular weight and conversion indicate that control may in principle be possible.


2006 ◽  
Vol 11-12 ◽  
pp. 757-760
Author(s):  
Jun Ying Zhang ◽  
Peng Dou

Environmentally benign adhesive was synthesized by dispersion copolymerization of styrene(St) and butyl acrylate (BA) in an ethanol medium with benzoyl peroxide (BPO) as the initiator and poly(vinylpyrrolidone) as the stabilizer in the presence of acrylic acid(AA) as the functional monomer. The effect of the concentration of stabilizer, initiator and functional monomer on the conversions, molecular weights and molecular weight distributions was investigated. The results show that the conversions almost keep invariable with the increasing of stabilizer concentration, but the molecular weights increase and molecular weight distributions decrease. Conversions increase with the increasing of initiator concentration, but the molecular weights and molecular weight distributions decrease. However with the increasing of functional monomer concentration, conversions and molecular weight distributions increase but the molecular weights decrease.


2015 ◽  
Vol 6 (30) ◽  
pp. 5362-5368 ◽  
Author(s):  
Qiang Fu ◽  
Thomas G. McKenzie ◽  
Shereen Tan ◽  
Eunhyung Nam ◽  
Greg G. Qiao

A novel tertiary amine catalyst and trithiocarbonate synergistic photo-induced controlled radical polymerization of methacrylates has been realized under mild UV irradiation, yielding polymethacrylates with low molecular weight distributions and excellent end-group fidelity.


1970 ◽  
Vol 43 (6) ◽  
pp. 1439-1450 ◽  
Author(s):  
W. V. Smith ◽  
S. Thiruvengada

Abstract A preparative fractionation of about 23 g of a commercial cis-polybutadiene rubber is described. The method employed was a solvent elution chromatographic method with very little temperature gradient. The molecular weight distributions of the fractions obtained were determined by an analytical fractionation of 20 mg of polymer. The method was similar to the preparative fractionation and involved solvent elution chromatography. The fractions obtained were assayed for quantity, molecular weight, and molecular weight distribution by GPC. The low molecular weight fractions of the preparative fractionation had molecular weight distributions which could be closely approximated by two log normal distributions, the low molecular weight component having the narrower width. The ratio of weight to number average molecular weight was found to be about 1.1 for these samples. The higher molecular weight fractions could also be approximated by two log normal distributions; however, in these fractions the low molecular weight component had a very broad distribution but constituted only a small portion of the sample. The widths of the GPC curves of the fractions correlate satisfactorily with the molecular weight distributions found by the analytical refractionations. The GPC width is a sensitive criterion of the width of the molecular weight distribution even when only two columns are used. It is felt that the analytical fractionation procedure presented gives more detailed information on the molecular weight distribution than is easily obtainable from an ordinary GPC curve.


Sign in / Sign up

Export Citation Format

Share Document