Combination of Microdialysis and Glucose Sensor for Continuous On Line Measurement of the Subcutaneous Glucose Concentration: Theory and Practical Application

1994 ◽  
Vol 26 (11) ◽  
pp. 538-543 ◽  
Author(s):  
C. Meyerhoff ◽  
F. Mennel ◽  
Friederike Bischof ◽  
F. Sternberg ◽  
E. Pfeiffer
2002 ◽  
Vol 149 (4) ◽  
pp. H103 ◽  
Author(s):  
Yuanhang Xu ◽  
Antony S. Jeevarajan ◽  
James M. Fay ◽  
Thomas D. Taylor ◽  
Melody M. Anderson

2002 ◽  
Vol 56 (1) ◽  
pp. 51-57 ◽  
Author(s):  
Byungjo Jung ◽  
Seungjun Lee ◽  
In Hong Yang ◽  
Theresa Good ◽  
Gerard L. Coté

Current techniques for monitoring glucose concentration during cell culture are invasively performed using an off-line measurement system. Even though in situ or ex situ analyte sensors have been tried for on-line measurement, they suffer from difficulties including the inability to keep them sterile, their limited lifetime, and their lack of stability. In this research an alternative optical noninvasive on-line monitoring system based on near-infrared absorbance spectroscopy was developed to measure glucose concentration of cell culture media in a rotary cell culture system. The system included an automatic sampling component controlled by a LabVIEW program and a high-throughput fiber coupling component connected to a Fourier transform near-infrared spectrometer. The effectiveness of the system was investigated via noninvasive on-line measurement of glucose absorbance spectra in the cell culture media during T-cell culture. Glucose absorbance spectra were collected in the spectral range of 2.0 to 2.5 μm. Partial least-squares regression was employed to build a successful multivariate calibration model. The standard error of prediction and mean percent error for glucose were 7.7 mg/dL and 1.0%, respectively. The successful results represent an important step in the development of a noninvasive, closed-loop, system for monitoring analytes in cell culture.


Author(s):  
John F. Mansfield ◽  
Douglas C. Crawford

A method has been developed that allows on-line measurement of the thickness of crystalline materials in the analytical electron microscope. Two-beam convergent beam electron diffraction (CBED) patterns are digitized from a JEOL 2000FX electron microscope into an Apple Macintosh II microcomputer via a Gatan #673 CCD Video Camera and an Imaging Systems Technology Video 1000 frame-capture board. It is necessary to know the lattice parameters of the sample since measurements are made of the spacing of the diffraction discs in order to calibrate the pattern. The sample thickness is calculated from measurements of the spacings of the fringes that are seen in the diffraction discs. This technique was pioneered by Kelly et al, who used the two-beam dynamic theory of MacGillavry relate the deviation parameter (Si) of the ith fringe from the exact Bragg condition to the specimen thickness (t) with the equation:Where ξg, is the extinction distance for that reflection and ni is an integer.


1993 ◽  
Vol 28 (11-12) ◽  
pp. 531-538 ◽  
Author(s):  
B. Teichgräber

A nitrification/denitrification process was applied to reject water treatment from sludge dewatering at Bottrop central sludge treatment facilities of the Emschergenossenschaft. On-line monitoring of influent and effluent turbidity, closed loop control of DO and pH, and on-line monitoring of nitrogen compounds were combined to a three level control pattern. Though on-line measurement of substrate and product showed substantial response time it could be used to operate nitrification/denitrification within process boundaries.


Author(s):  
Qiwen Jin ◽  
Xijiong Chen ◽  
Pei Li ◽  
Yonggang Zhou ◽  
Yingchun Wu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document