scholarly journals Three-Dimensional Analysis of Reinforced Concrete Beam-Column Structures in Fire

2009 ◽  
Vol 135 (10) ◽  
pp. 1201-1212 ◽  
Author(s):  
Zhaohui Huang ◽  
Ian W. Burgess ◽  
Roger J. Plank
Author(s):  
Dušan Ružić ◽  
Igor Planinc ◽  
Urban Rodman ◽  
Tomaž Hozjan

In the present study the fire analysis of a curved reinforced concrete beam exposed to concrete spalling is presented. Due to the complexity of physical and chemical processes in concrete at elevated temperatures, the proposed numerical model is divided into two consecutive mathematically uncoupled phases. In the second phase of the fire analysis a partially coupled numerical model is introduced in order to evaluate the effect of concrete spalling on the behaviour of curved RC beam in fire. In addition, the effect of depth, time development and the length of spalling area on the fire resistance of a curved RC beam is discussed.


CORROSION ◽  
1988 ◽  
Vol 44 (10) ◽  
pp. 761-765 ◽  
Author(s):  
S. Feliu ◽  
J. A. Gonzalez ◽  
C. Andrade ◽  
V. Feliu

2020 ◽  
Author(s):  
Pavlina Mateckova ◽  
Zuzana Marcalikova ◽  
David Bujdoš ◽  
Marie Kozielova

Author(s):  
Soffian Noor Mat Saliah ◽  
Noorsuhada Md Nor ◽  
Noorhazlinda Abd Rahman ◽  
Shahrum Abdullah ◽  
Mohd Subri Tahir

Author(s):  
Diego L. Castañeda-Saldarriaga ◽  
Joham Alvarez-Montoya ◽  
Vladimir Martínez-Tejada ◽  
Julián Sierra-Pérez

AbstractSelf-sensing concrete materials, also known as smart concretes, are emerging as a promising technological development for the construction industry, where novel materials with the capability of providing information about the structural integrity while operating as a structural material are required. Despite progress in the field, there are issues related to the integration of these composites in full-scale structural members that need to be addressed before broad practical implementations. This article reports the manufacturing and multipurpose experimental characterization of a cement-based matrix (CBM) composite with carbon nanotube (CNT) inclusions and its integration inside a representative structural member. Methodologies based on current–voltage (I–V) curves, direct current (DC), and biphasic direct current (BDC) were used to study and characterize the electric resistance of the CNT/CBM composite. Their self-sensing behavior was studied using a compression test, while electric resistance measures were taken. To evaluate the damage detection capability, a CNT/CBM parallelepiped was embedded into a reinforced-concrete beam (RC beam) and tested under three-point bending. Principal finding includes the validation of the material’s piezoresistivity behavior and its suitability to be used as strain sensor. Also, test results showed that manufactured composites exhibit an Ohmic response. The embedded CNT/CBM material exhibited a dominant linear proportionality between electrical resistance values, load magnitude, and strain changes into the RC beam. Finally, a change in the global stiffness (associated with a damage occurrence on the beam) was successfully self-sensed using the manufactured sensor by means of the variation in the electrical resistance. These results demonstrate the potential of CNT/CBM composites to be used in real-world structural health monitoring (SHM) applications for damage detection by identifying changes in stiffness of the monitored structural member.


Sign in / Sign up

Export Citation Format

Share Document